| Message ID | 20210105060818.24158-4-laurent.pinchart+renesas@ideasonboard.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | dt-bindings: display: Convert DWC HDMI TX bindings to YAML | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | total: 0 errors, 1 warnings, 130 lines checked |
| robh/dt-meta-schema | success | |
| robh/dtbs-check | fail | build log |
On Tue, Jan 05, 2021 at 08:08:15AM +0200, Laurent Pinchart wrote: > Convert the i.MX6 HDMI TX text binding to YAML. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > Changes since v1: > > - Only specify maxItems for clocks > - Drop reg and interrupts as they're checked in the base schema > - Rebase on top of OF graph schema, dropped redundant properties > - Fix identation for enum entries > - Drop clock-names items, use maxItems only > --- > .../bindings/display/imx/fsl,imx6-hdmi.yaml | 130 ++++++++++++++++++ > .../devicetree/bindings/display/imx/hdmi.txt | 65 --------- > 2 files changed, 130 insertions(+), 65 deletions(-) > create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml > delete mode 100644 Documentation/devicetree/bindings/display/imx/hdmi.txt > > diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml > new file mode 100644 > index 000000000000..f9b131bb3339 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml > @@ -0,0 +1,130 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/imx/fsl,imx6-hdmi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX6 DWC HDMI TX Encoder > + > +maintainers: > + - Philipp Zabel <p.zabel@pengutronix.de> > + > +description: | > + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP > + with a companion PHY IP. > + > +allOf: > + - $ref: ../bridge/synopsys,dw-hdmi.yaml# > + > +properties: > + compatible: > + enum: > + - fsl,imx6dl-hdmi > + - fsl,imx6q-hdmi > + > + reg-io-width: > + const: 1 > + > + clocks: > + maxItems: 2 > + > + clock-names: > + maxItems: 2 > + > + ddc-i2c-bus: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + The HDMI DDC bus can be connected to either a system I2C master or the > + functionally-reduced I2C master contained in the DWC HDMI. When connected > + to a system I2C master this property contains a phandle to that I2C > + master controller. This should be deprecated as it should be in the connector node. But that's a separate issue. > + > + gpr: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + phandle to the iomuxc-gpr region containing the HDMI multiplexer control > + register. > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + description: | > + This device has four video ports, corresponding to the four inputs of the > + HDMI multiplexer. Each port shall have a single endpoint. > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: First input of the HDMI multiplexer muxing should have been endpoints rather than ports... Anyways, same 'port' issues here. With those fixes: Reviewed-by: Rob Herring <robh@kernel.org> > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: Second input of the HDMI multiplexer > + > + port@2: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: Third input of the HDMI multiplexer > + > + port@3: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: Fourth input of the HDMI multiplexer > + > + anyOf: > + - required: > + - port@0 > + - required: > + - port@1 > + - required: > + - port@2 > + - required: > + - port@3 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - gpr > + - interrupts > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/imx6qdl-clock.h> > + > + hdmi: hdmi@120000 { > + reg = <0x00120000 0x9000>; > + interrupts = <0 115 0x04>; > + gpr = <&gpr>; > + clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, > + <&clks IMX6QDL_CLK_HDMI_ISFR>; > + clock-names = "iahb", "isfr"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + hdmi_mux_0: endpoint { > + remote-endpoint = <&ipu1_di0_hdmi>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + hdmi_mux_1: endpoint { > + remote-endpoint = <&ipu1_di1_hdmi>; > + }; > + }; > + }; > + }; > + > +... > diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt > deleted file mode 100644 > index 6d021e71c9cf..000000000000 > --- a/Documentation/devicetree/bindings/display/imx/hdmi.txt > +++ /dev/null > @@ -1,65 +0,0 @@ > -Freescale i.MX6 DWC HDMI TX Encoder > -=================================== > - > -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP > -with a companion PHY IP. > - > -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in > -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the > -following device-specific properties. > - > - > -Required properties: > - > -- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". > -- reg: See dw_hdmi.txt. > -- interrupts: HDMI interrupt number > -- clocks: See dw_hdmi.txt. > -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. > -- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports, > - numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer. > - Each port shall have a single endpoint. > -- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI > - multiplexer control register. > - > -Optional properties > - > -- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master > - or the functionally-reduced I2C master contained in the DWC HDMI. When > - connected to a system I2C master this property contains a phandle to that > - I2C master controller. > - > - > -Example: > - > - gpr: iomuxc-gpr@20e0000 { > - /* ... */ > - }; > - > - hdmi: hdmi@120000 { > - #address-cells = <1>; > - #size-cells = <0>; > - compatible = "fsl,imx6q-hdmi"; > - reg = <0x00120000 0x9000>; > - interrupts = <0 115 0x04>; > - gpr = <&gpr>; > - clocks = <&clks 123>, <&clks 124>; > - clock-names = "iahb", "isfr"; > - ddc-i2c-bus = <&i2c2>; > - > - port@0 { > - reg = <0>; > - > - hdmi_mux_0: endpoint { > - remote-endpoint = <&ipu1_di0_hdmi>; > - }; > - }; > - > - port@1 { > - reg = <1>; > - > - hdmi_mux_1: endpoint { > - remote-endpoint = <&ipu1_di1_hdmi>; > - }; > - }; > - }; > -- > Regards, > > Laurent Pinchart >
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml new file mode 100644 index 000000000000..f9b131bb3339 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx6-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX6 DWC HDMI TX Encoder + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP + with a companion PHY IP. + +allOf: + - $ref: ../bridge/synopsys,dw-hdmi.yaml# + +properties: + compatible: + enum: + - fsl,imx6dl-hdmi + - fsl,imx6q-hdmi + + reg-io-width: + const: 1 + + clocks: + maxItems: 2 + + clock-names: + maxItems: 2 + + ddc-i2c-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The HDMI DDC bus can be connected to either a system I2C master or the + functionally-reduced I2C master contained in the DWC HDMI. When connected + to a system I2C master this property contains a phandle to that I2C + master controller. + + gpr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the iomuxc-gpr region containing the HDMI multiplexer control + register. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + This device has four video ports, corresponding to the four inputs of the + HDMI multiplexer. Each port shall have a single endpoint. + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: First input of the HDMI multiplexer + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Second input of the HDMI multiplexer + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Third input of the HDMI multiplexer + + port@3: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: Fourth input of the HDMI multiplexer + + anyOf: + - required: + - port@0 + - required: + - port@1 + - required: + - port@2 + - required: + - port@3 + +required: + - compatible + - reg + - clocks + - clock-names + - gpr + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + + hdmi: hdmi@120000 { + reg = <0x00120000 0x9000>; + interrupts = <0 115 0x04>; + gpr = <&gpr>; + clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, + <&clks IMX6QDL_CLK_HDMI_ISFR>; + clock-names = "iahb", "isfr"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_hdmi>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_hdmi>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt deleted file mode 100644 index 6d021e71c9cf..000000000000 --- a/Documentation/devicetree/bindings/display/imx/hdmi.txt +++ /dev/null @@ -1,65 +0,0 @@ -Freescale i.MX6 DWC HDMI TX Encoder -=================================== - -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with a companion PHY IP. - -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the -following device-specific properties. - - -Required properties: - -- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". -- reg: See dw_hdmi.txt. -- interrupts: HDMI interrupt number -- clocks: See dw_hdmi.txt. -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. -- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports, - numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer. - Each port shall have a single endpoint. -- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI - multiplexer control register. - -Optional properties - -- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master - or the functionally-reduced I2C master contained in the DWC HDMI. When - connected to a system I2C master this property contains a phandle to that - I2C master controller. - - -Example: - - gpr: iomuxc-gpr@20e0000 { - /* ... */ - }; - - hdmi: hdmi@120000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx6q-hdmi"; - reg = <0x00120000 0x9000>; - interrupts = <0 115 0x04>; - gpr = <&gpr>; - clocks = <&clks 123>, <&clks 124>; - clock-names = "iahb", "isfr"; - ddc-i2c-bus = <&i2c2>; - - port@0 { - reg = <0>; - - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; - }; - }; - - port@1 { - reg = <1>; - - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; - }; - }; - };
Convert the i.MX6 HDMI TX text binding to YAML. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- Changes since v1: - Only specify maxItems for clocks - Drop reg and interrupts as they're checked in the base schema - Rebase on top of OF graph schema, dropped redundant properties - Fix identation for enum entries - Drop clock-names items, use maxItems only --- .../bindings/display/imx/fsl,imx6-hdmi.yaml | 130 ++++++++++++++++++ .../devicetree/bindings/display/imx/hdmi.txt | 65 --------- 2 files changed, 130 insertions(+), 65 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml delete mode 100644 Documentation/devicetree/bindings/display/imx/hdmi.txt