diff mbox series

[1/2] regulator: dt-bindings: Add PMX55 compatibles

Message ID 20201126093018.1085594-1-vkoul@kernel.org
State Not Applicable
Headers show
Series [1/2] regulator: dt-bindings: Add PMX55 compatibles | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Vinod Koul Nov. 26, 2020, 9:30 a.m. UTC
Add PMX55 compatibles for PMIC found in SDX55 platform

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 .../devicetree/bindings/regulator/qcom,rpmh-regulator.txt       | 2 ++
 1 file changed, 2 insertions(+)

Comments

Bjorn Andersson Nov. 26, 2020, 5:35 p.m. UTC | #1
On Thu 26 Nov 03:30 CST 2020, Vinod Koul wrote:

> Add PMX55 compatibles for PMIC found in SDX55 platform
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  .../devicetree/bindings/regulator/qcom,rpmh-regulator.txt       | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> index 97c3e0b7611c..bae558b87686 100644
> --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
> @@ -30,6 +30,7 @@ Supported regulator node names:
>  	PMI8998:	bob
>  	PM6150:         smps1 - smps5, ldo1 - ldo19
>  	PM6150L:        smps1 - smps8, ldo1 - ldo11, bob
> +	PMX55:		smps1 - smps7, ldo1 - ldo16
>  
>  ========================
>  First Level Nodes - PMIC
> @@ -47,6 +48,7 @@ First Level Nodes - PMIC
>  		    "qcom,pmi8998-rpmh-regulators"
>  		    "qcom,pm6150-rpmh-regulators"
>  		    "qcom,pm6150l-rpmh-regulators"
> +		    "qcom,pmx55-rpmh-regulators"
>  
>  - qcom,pmic-id
>  	Usage:      required
> -- 
> 2.26.2
>
Bjorn Andersson Nov. 26, 2020, 5:35 p.m. UTC | #2
On Thu 26 Nov 03:30 CST 2020, Vinod Koul wrote:

> Add support from RPMH regulators found in SDX55 platform
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  drivers/regulator/qcom-rpmh-regulator.c | 31 +++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index d488325499a9..e673d48b31a1 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -930,6 +930,33 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
>  	{},
>  };
>  
> +static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
> +	RPMH_VREG("smps1",   "smp%s1",    &pmic5_ftsmps510, "vdd-s1"),
> +	RPMH_VREG("smps2",   "smp%s2",    &pmic5_hfsmps510, "vdd-s2"),
> +	RPMH_VREG("smps3",   "smp%s3",    &pmic5_hfsmps510, "vdd-s3"),
> +	RPMH_VREG("smps4",   "smp%s4",    &pmic5_hfsmps510, "vdd-s4"),
> +	RPMH_VREG("smps5",   "smp%s5",    &pmic5_hfsmps510, "vdd-s5"),
> +	RPMH_VREG("smps6",   "smp%s6",    &pmic5_ftsmps510, "vdd-s6"),
> +	RPMH_VREG("smps7",   "smp%s7",    &pmic5_hfsmps510, "vdd-s7"),
> +	RPMH_VREG("ldo1",    "ldo%s1",    &pmic5_nldo,      "vdd-l1-l2"),
> +	RPMH_VREG("ldo2",    "ldo%s2",    &pmic5_nldo,      "vdd-l1-l2"),
> +	RPMH_VREG("ldo3",    "ldo%s3",    &pmic5_nldo,      "vdd-l3-l9"),
> +	RPMH_VREG("ldo4",    "ldo%s4",    &pmic5_nldo,      "vdd-l4-l12"),
> +	RPMH_VREG("ldo5",    "ldo%s5",    &pmic5_pldo,      "vdd-l5-l6"),
> +	RPMH_VREG("ldo6",    "ldo%s6",    &pmic5_pldo,      "vdd-l5-l6"),
> +	RPMH_VREG("ldo7",    "ldo%s7",    &pmic5_nldo,      "vdd-l7-l8"),
> +	RPMH_VREG("ldo8",    "ldo%s8",    &pmic5_nldo,      "vdd-l7-l8"),
> +	RPMH_VREG("ldo9",    "ldo%s9",    &pmic5_nldo,      "vdd-l3-l9"),
> +	RPMH_VREG("ldo10",   "ldo%s10",   &pmic5_pldo,      "vdd-l10-l11-l13"),
> +	RPMH_VREG("ldo11",   "ldo%s11",   &pmic5_pldo,      "vdd-l10-l11-l13"),
> +	RPMH_VREG("ldo12",   "ldo%s12",   &pmic5_nldo,      "vdd-l4-l12"),
> +	RPMH_VREG("ldo13",   "ldo%s13",   &pmic5_pldo,      "vdd-l10-l11-l13"),
> +	RPMH_VREG("ldo14",   "ldo%s14",   &pmic5_nldo,      "vdd-l14"),
> +	RPMH_VREG("ldo15",   "ldo%s15",   &pmic5_nldo,      "vdd-l15"),
> +	RPMH_VREG("ldo16",   "ldo%s16",   &pmic5_pldo,      "vdd-l16"),
> +	{},
> +};
> +
>  static int rpmh_regulator_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -1000,6 +1027,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
>  		.compatible = "qcom,pm6150l-rpmh-regulators",
>  		.data = pm6150l_vreg_data,
>  	},
> +	{
> +		.compatible = "qcom,pmx55-rpmh-regulators",
> +		.data = pmx55_vreg_data,
> +	},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
> -- 
> 2.26.2
>
Mark Brown Nov. 26, 2020, 8:06 p.m. UTC | #3
On Thu, 26 Nov 2020 15:00:17 +0530, Vinod Koul wrote:
> Add PMX55 compatibles for PMIC found in SDX55 platform

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/2] regulator: dt-bindings: Add PMX55 compatibles
      commit: 1008521b9b4f85d80ac1d80391ac39055c89f736
[2/2] regulator: qcom-rpmh: Add support for SDX55
      commit: 36dd70ceb4d955e6cd3ecd18e78169141aaa23b7

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
index 97c3e0b7611c..bae558b87686 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
@@ -30,6 +30,7 @@  Supported regulator node names:
 	PMI8998:	bob
 	PM6150:         smps1 - smps5, ldo1 - ldo19
 	PM6150L:        smps1 - smps8, ldo1 - ldo11, bob
+	PMX55:		smps1 - smps7, ldo1 - ldo16
 
 ========================
 First Level Nodes - PMIC
@@ -47,6 +48,7 @@  First Level Nodes - PMIC
 		    "qcom,pmi8998-rpmh-regulators"
 		    "qcom,pm6150-rpmh-regulators"
 		    "qcom,pm6150l-rpmh-regulators"
+		    "qcom,pmx55-rpmh-regulators"
 
 - qcom,pmic-id
 	Usage:      required