diff mbox series

[1/2] dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support

Message ID 20201126092151.1082697-1-vkoul@kernel.org
State Not Applicable
Headers show
Series [1/2] dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Vinod Koul Nov. 26, 2020, 9:21 a.m. UTC
Add support for the PMX55 GPIO support to the Qualcomm PMIC GPIO
binding.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 3 +++
 1 file changed, 3 insertions(+)

Comments

Bjorn Andersson Nov. 26, 2020, 5:36 p.m. UTC | #1
On Thu 26 Nov 03:21 CST 2020, Vinod Koul wrote:

> Add support for the PMX55 GPIO support to the Qualcomm PMIC GPIO
> binding.
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> index c3d1914381ae..7648ab00f4e2 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> @@ -29,6 +29,7 @@ PMIC's from Qualcomm.
>  		    "qcom,pm8150b-gpio"
>  		    "qcom,pm6150-gpio"
>  		    "qcom,pm6150l-gpio"
> +		    "qcom,pmx55-gpio"
>  
>  		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
>  		    if the device is on an spmi bus or an ssbi bus respectively
> @@ -110,6 +111,8 @@ to specify in a pin configuration subnode:
>  		    gpio1-gpio12 for pm8150l (hole on gpio7)
>  		    gpio1-gpio10 for pm6150
>  		    gpio1-gpio12 for pm6150l
> +		    gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10
> +					    and gpio11)
>  
>  - function:
>  	Usage: required
> -- 
> 2.26.2
>
Bjorn Andersson Nov. 26, 2020, 5:36 p.m. UTC | #2
On Thu 26 Nov 03:21 CST 2020, Vinod Koul wrote:

> PM55 pmic support gpio controller so add compatible and comment for gpio
> holes
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> index 17441388ce8f..9801c717e311 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> @@ -1129,6 +1129,8 @@ static const struct of_device_id pmic_gpio_of_match[] = {
>  	{ .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
>  	{ .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
>  	{ .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
> +	/* pmx55 has 11 GPIOs with holes on 3, 7, 10, 11 */
> +	{ .compatible = "qcom,pmx55-gpio", .data = (void *) 11 },
>  	{ },
>  };
>  
> -- 
> 2.26.2
>
Linus Walleij Dec. 4, 2020, 9:21 a.m. UTC | #3
On Thu, Nov 26, 2020 at 10:22 AM Vinod Koul <vkoul@kernel.org> wrote:

> Add support for the PMX55 GPIO support to the Qualcomm PMIC GPIO
> binding.
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Patch applied!

Yours,
Linus Walleij
Linus Walleij Dec. 4, 2020, 9:22 a.m. UTC | #4
On Thu, Nov 26, 2020 at 10:22 AM Vinod Koul <vkoul@kernel.org> wrote:

> PM55 pmic support gpio controller so add compatible and comment for gpio
> holes
>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Patch applied!

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index c3d1914381ae..7648ab00f4e2 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -29,6 +29,7 @@  PMIC's from Qualcomm.
 		    "qcom,pm8150b-gpio"
 		    "qcom,pm6150-gpio"
 		    "qcom,pm6150l-gpio"
+		    "qcom,pmx55-gpio"
 
 		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
 		    if the device is on an spmi bus or an ssbi bus respectively
@@ -110,6 +111,8 @@  to specify in a pin configuration subnode:
 		    gpio1-gpio12 for pm8150l (hole on gpio7)
 		    gpio1-gpio10 for pm6150
 		    gpio1-gpio12 for pm6150l
+		    gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10
+					    and gpio11)
 
 - function:
 	Usage: required