| Message ID | 20201110183827.19731-1-james.quinlan@broadcom.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | [v1,1/2] dt-bindings: arm: Add optional interrupt to smc/hvc SCMI transport | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success |
On Tue, Nov 10, 2020 at 01:38:18PM -0500, Jim Quinlan wrote: > This change allows the SCMI "platform" to use the smc/hvc transport and to Incorrect statement above, it is OSPM using SMC/HVC as transport and not the "platform" which refers to entity/firmware implementing SCMI services to OSPM. Also this change is not adding SMC/HVC, just the interrupt support. > optionally indicate the completion of an SCMI message with an interrupt. > This is in contrast to the nominal case where the return of the SMC call > indicates message completion. > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> > --- > Documentation/devicetree/bindings/arm/arm,scmi.txt | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt > index 55deb68230eb..d3b0c9f387fe 100644 > --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt > +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt > @@ -31,6 +31,14 @@ Optional properties: > > - mbox-names: shall be "tx" or "rx" depending on mboxes entries. > > +- interrupts : when using smc or hvc transports, this optional > + property indicates that msg completion by the platform is indicated s/msg/message/ > + by an interrupt rather than by the return of the smc call. This > + should not be used except when the platform requires such behavior. > + > +- interrupt-names : the name must be "msg-serviced". Is this mandatory if "interrupts" is present ? > + > + Extra blank line ? -- Regards, Sudeep
diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt index 55deb68230eb..d3b0c9f387fe 100644 --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt @@ -31,6 +31,14 @@ Optional properties: - mbox-names: shall be "tx" or "rx" depending on mboxes entries. +- interrupts : when using smc or hvc transports, this optional + property indicates that msg completion by the platform is indicated + by an interrupt rather than by the return of the smc call. This + should not be used except when the platform requires such behavior. + +- interrupt-names : the name must be "msg-serviced". + + See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details about the generic mailbox controller and client driver bindings.
This change allows the SCMI "platform" to use the smc/hvc transport and to optionally indicate the completion of an SCMI message with an interrupt. This is in contrast to the nominal case where the return of the SMC call indicates message completion. Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> --- Documentation/devicetree/bindings/arm/arm,scmi.txt | 8 ++++++++ 1 file changed, 8 insertions(+)