diff mbox series

[v19,4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings

Message ID 20201019224007.16846-5-ben.levinsky@xilinx.com
State Superseded
Headers show
Series Provide basic driver to control Arm R5 co-processor found on Xilinx ZynqMP | expand

Checks

Context Check Description
robh/dt-meta-schema success
robh/checkpatch success

Commit Message

Ben Levinsky Oct. 19, 2020, 10:40 p.m. UTC
Add binding for ZynqMP R5 OpenAMP.

Represent the RPU domain resources in one device node. Each RPU
processor is a subnode of the top RPU domain node.

Signed-off-by: Jason Wu <j.wu@xilinx.com>
Signed-off-by: Wendy Liang <jliang@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
---
v3:
- update zynqmp_r5 yaml parsing to not raise warnings for extra
  information in children of R5 node. The warning "node has a unit
  name, but no reg or ranges property" will still be raised though 
  as this particular node is needed to describe the
  '#address-cells' and '#size-cells' information.
v4::
- remove warning '/example-0/rpu@ff9a0000/r5@0: 
  node has a unit name, but no reg or ranges property'
  by adding reg to r5 node.
v5:
- update device tree sample and yaml parsing to not raise any warnings
- description for memory-region in yaml parsing
- compatible string in yaml parsing for TCM
v6:
- remove coupling TCM nodes with remoteproc 
- remove mailbox as it is optional not needed
v7:
- change lockstep-mode to xlnx,cluster-mode
v9:
- show example IPC nodes and tcm bank nodes
v11:
- add property meta-memory-regions to illustrate link
  between r5 and TCM banks
- update so no warnings from 'make dt_binding_check'
v14:
- concerns were raised about the new property meta-memory-regions.
  There is no clear direction so for the moment I kept it in the series
- place IPC nodes in RAM in the reserved memory section
v15:
- change lockstep-mode prop as follows: if present, then RPU cluster is in
  lockstep mode. if not present, cluster is in split mode.
v17:
- remove compatible string from tcm bank nodes
- fix style for bindings
- add boolean type to lockstep mode in binding
- add/update descriptions memory-region, meta-memory-regions,
  pnode-id, mbox* properties
v18: 
- update example remoteproc zynqmp r5 compat string, remove version
  number
- change property from memory-region to memory-regions
---
 .../xilinx,zynqmp-r5-remoteproc.yaml          | 142 ++++++++++++++++++
 1 file changed, 142 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml

Comments

Mathieu Poirier Oct. 29, 2020, 10:53 p.m. UTC | #1
On Mon, Oct 19, 2020 at 03:40:06PM -0700, Ben Levinsky wrote:
> Add binding for ZynqMP R5 OpenAMP.
> 
> Represent the RPU domain resources in one device node. Each RPU
> processor is a subnode of the top RPU domain node.
> 
> Signed-off-by: Jason Wu <j.wu@xilinx.com>
> Signed-off-by: Wendy Liang <jliang@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
> ---
> v3:
> - update zynqmp_r5 yaml parsing to not raise warnings for extra
>   information in children of R5 node. The warning "node has a unit
>   name, but no reg or ranges property" will still be raised though 
>   as this particular node is needed to describe the
>   '#address-cells' and '#size-cells' information.
> v4::
> - remove warning '/example-0/rpu@ff9a0000/r5@0: 
>   node has a unit name, but no reg or ranges property'
>   by adding reg to r5 node.
> v5:
> - update device tree sample and yaml parsing to not raise any warnings
> - description for memory-region in yaml parsing
> - compatible string in yaml parsing for TCM
> v6:
> - remove coupling TCM nodes with remoteproc 
> - remove mailbox as it is optional not needed
> v7:
> - change lockstep-mode to xlnx,cluster-mode
> v9:
> - show example IPC nodes and tcm bank nodes
> v11:
> - add property meta-memory-regions to illustrate link
>   between r5 and TCM banks
> - update so no warnings from 'make dt_binding_check'
> v14:
> - concerns were raised about the new property meta-memory-regions.
>   There is no clear direction so for the moment I kept it in the series
> - place IPC nodes in RAM in the reserved memory section
> v15:
> - change lockstep-mode prop as follows: if present, then RPU cluster is in
>   lockstep mode. if not present, cluster is in split mode.
> v17:
> - remove compatible string from tcm bank nodes
> - fix style for bindings
> - add boolean type to lockstep mode in binding
> - add/update descriptions memory-region, meta-memory-regions,
>   pnode-id, mbox* properties
> v18: 
> - update example remoteproc zynqmp r5 compat string, remove version
>   number
> - change property from memory-region to memory-regions
> ---
>  .../xilinx,zynqmp-r5-remoteproc.yaml          | 142 ++++++++++++++++++
>  1 file changed, 142 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
> new file mode 100644
> index 000000000000..c202dca3b6d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Xilinx R5 remote processor controller bindings
> +
> +description:
> +  This document defines the binding for the remoteproc component that loads and
> +  boots firmwares on the Xilinx Zynqmp and Versal family chipset.
> +
> +  Note that the Linux has global addressing view of the R5-related memory (TCM)
> +  so the absolute address ranges are provided in TCM reg's.
> +
> +maintainers:
> +  - Ed Mooring <ed.mooring@xilinx.com>
> +  - Ben Levinsky <ben.levinsky@xilinx.com>
> +
> +properties:
> +  compatible:
> +    const: xlnx,zynqmp-r5-remoteproc
> +
> +  lockstep-mode:
> +    description:
> +      If this property is present, then the configuration is lock-step.
> +      Otherwise RPU is split.
> +    type: boolean
> +    maxItems: 1
> +
> +  interrupts:
> +    description:
> +      Interrupt mapping for remoteproc IPI. It is required if the
> +      user uses the remoteproc driver with the RPMsg kernel driver.
> +    maxItems: 6
> +
> +  memory-regions:
> +    description:
> +      collection of memory carveouts used for elf-loading and inter-processor

For each of the above the first line of the description had a capital letter
while this one (and the one below) don't.

> +      communication. each carveout in this case should be in DDR, not

Again this is abnormal - please fix everywhere.

> +      chip-specific memory. In Xilinx case, this is TCM, OCM, BRAM, etc.
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +
> +  meta-memory-regions:
> +    description:
> +      collection of memories that are not present in the top level memory
> +      nodes' mapping. For example, R5s' TCM banks. These banks are needed
> +      for R5 firmware meta data such as the R5 firmware's heap and stack.
> +      To be more precise, this is on-chip reserved SRAM regions, e.g. TCM,
> +      BRAM, OCM, etc.
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +
> +  pnode-id:
> +    maxItems: 1
> +    description:
> +      power node id that is used to uniquely identify the node for Xilinx
> +      Power Management. The value is then passed to Xilinx platform
> +      manager for power on/off and access.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  mboxes:
> +    description:
> +      array of phandles that describe the rx and tx for xilinx zynqmp
> +      mailbox driver. order of rx and tx is described by the mbox-names
> +      property. This will be used for communication with remote
> +      processor.
> +    maxItems: 2
> +
> +  mbox-names:
> +    description:
> +      array of strings that denote which item in the mboxes property array
> +      are the rx and tx for xilinx zynqmp mailbox driver
> +    maxItems: 2
> +    $ref: /schemas/types.yaml#/definitions/string-array
> +
> +
> +examples:
> +  - |
> +     reserved-memory {
> +          #address-cells = <1>;
> +          #size-cells = <1>;
> +          ranges;
> +          elf_load: rproc@3ed000000 {
> +               no-map;
> +               reg = <0x3ed00000 0x40000>;
> +          };
> +
> +          rpu0vdev0vring0: rpu0vdev0vring0@3ed40000 {
> +               no-map;
> +               reg = <0x3ed40000 0x4000>;
> +          };
> +          rpu0vdev0vring1: rpu0vdev0vring1@3ed44000 {
> +               no-map;
> +               reg = <0x3ed44000 0x4000>;
> +          };
> +          rpu0vdev0buffer: rpu0vdev0buffer@3ed48000 {
> +               no-map;
> +               reg = <0x3ed48000 0x100000>;
> +          };
> +
> +     };
> +
> +     /*
> +      * Below nodes are required if using TCM to load R5 firmware
> +      * if not, then either do not provide nodes are label as disabled in

s/are/or

> +      * status property
> +      */
> +     tcm0a: tcm_0a@ffe00000 {
> +         reg = <0xffe00000 0x10000>;
> +         pnode-id = <0xf>;
> +         no-map;
> +         status = "okay";
> +         phandle = <0x40>;
> +     };
> +     tcm0b: tcm_1a@ffe20000 {
> +         reg = <0xffe20000 0x10000>;
> +         pnode-id = <0x10>;
> +         no-map;
> +         status = "okay";
> +         phandle = <0x41>;
> +     };
> +
> +     rpu {
> +          compatible = "xlnx,zynqmp-r5-remoteproc";
> +          #address-cells = <1>;
> +          #size-cells = <1>;
> +          ranges;
> +          lockstep-mode;
> +          r5_0 {
> +               ranges;
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               memory-regions = <&elf_load>,
> +                               <&rpu0vdev0vring0>,
> +                               <&rpu0vdev0vring1>,
> +                               <&rpu0vdev0buffer>;
> +               meta-memory-regions = <&tcm_0a>, <&tcm_0b>;
> +               pnode-id = <0x7>;
> +          };
> +     };
> +
> +...
> -- 
> 2.17.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
new file mode 100644
index 000000000000..c202dca3b6d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
@@ -0,0 +1,142 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xilinx R5 remote processor controller bindings
+
+description:
+  This document defines the binding for the remoteproc component that loads and
+  boots firmwares on the Xilinx Zynqmp and Versal family chipset.
+
+  Note that the Linux has global addressing view of the R5-related memory (TCM)
+  so the absolute address ranges are provided in TCM reg's.
+
+maintainers:
+  - Ed Mooring <ed.mooring@xilinx.com>
+  - Ben Levinsky <ben.levinsky@xilinx.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-r5-remoteproc
+
+  lockstep-mode:
+    description:
+      If this property is present, then the configuration is lock-step.
+      Otherwise RPU is split.
+    type: boolean
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt mapping for remoteproc IPI. It is required if the
+      user uses the remoteproc driver with the RPMsg kernel driver.
+    maxItems: 6
+
+  memory-regions:
+    description:
+      collection of memory carveouts used for elf-loading and inter-processor
+      communication. each carveout in this case should be in DDR, not
+      chip-specific memory. In Xilinx case, this is TCM, OCM, BRAM, etc.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  meta-memory-regions:
+    description:
+      collection of memories that are not present in the top level memory
+      nodes' mapping. For example, R5s' TCM banks. These banks are needed
+      for R5 firmware meta data such as the R5 firmware's heap and stack.
+      To be more precise, this is on-chip reserved SRAM regions, e.g. TCM,
+      BRAM, OCM, etc.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  pnode-id:
+    maxItems: 1
+    description:
+      power node id that is used to uniquely identify the node for Xilinx
+      Power Management. The value is then passed to Xilinx platform
+      manager for power on/off and access.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  mboxes:
+    description:
+      array of phandles that describe the rx and tx for xilinx zynqmp
+      mailbox driver. order of rx and tx is described by the mbox-names
+      property. This will be used for communication with remote
+      processor.
+    maxItems: 2
+
+  mbox-names:
+    description:
+      array of strings that denote which item in the mboxes property array
+      are the rx and tx for xilinx zynqmp mailbox driver
+    maxItems: 2
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+
+examples:
+  - |
+     reserved-memory {
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges;
+          elf_load: rproc@3ed000000 {
+               no-map;
+               reg = <0x3ed00000 0x40000>;
+          };
+
+          rpu0vdev0vring0: rpu0vdev0vring0@3ed40000 {
+               no-map;
+               reg = <0x3ed40000 0x4000>;
+          };
+          rpu0vdev0vring1: rpu0vdev0vring1@3ed44000 {
+               no-map;
+               reg = <0x3ed44000 0x4000>;
+          };
+          rpu0vdev0buffer: rpu0vdev0buffer@3ed48000 {
+               no-map;
+               reg = <0x3ed48000 0x100000>;
+          };
+
+     };
+
+     /*
+      * Below nodes are required if using TCM to load R5 firmware
+      * if not, then either do not provide nodes are label as disabled in
+      * status property
+      */
+     tcm0a: tcm_0a@ffe00000 {
+         reg = <0xffe00000 0x10000>;
+         pnode-id = <0xf>;
+         no-map;
+         status = "okay";
+         phandle = <0x40>;
+     };
+     tcm0b: tcm_1a@ffe20000 {
+         reg = <0xffe20000 0x10000>;
+         pnode-id = <0x10>;
+         no-map;
+         status = "okay";
+         phandle = <0x41>;
+     };
+
+     rpu {
+          compatible = "xlnx,zynqmp-r5-remoteproc";
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges;
+          lockstep-mode;
+          r5_0 {
+               ranges;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               memory-regions = <&elf_load>,
+                               <&rpu0vdev0vring0>,
+                               <&rpu0vdev0vring1>,
+                               <&rpu0vdev0buffer>;
+               meta-memory-regions = <&tcm_0a>, <&tcm_0b>;
+               pnode-id = <0x7>;
+          };
+     };
+
+...