diff mbox series

[v2,2/8] dt-bindings: phy: convert phy-mtk-tphy.txt to YAML schema

Message ID 20201013085207.17749-2-chunfeng.yun@mediatek.com
State Changes Requested
Headers show
Series [v2,1/8] dt-bindings: phy: convert phy-mtk-xsphy.txt to YAML schema | expand

Checks

Context Check Description
robh/dt-meta-schema success
robh/checkpatch warning total: 1 errors, 1 warnings, 263 lines checked

Commit Message

Chunfeng Yun Oct. 13, 2020, 8:52 a.m. UTC
Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: modify description and compatible
---
 .../bindings/phy/mediatek,tphy.yaml           | 263 ++++++++++++++++++
 .../devicetree/bindings/phy/phy-mtk-tphy.txt  | 162 -----------
 2 files changed, 263 insertions(+), 162 deletions(-)
 create mode 100755 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt

Comments

Rob Herring Oct. 16, 2020, 5:04 p.m. UTC | #1
On Tue, Oct 13, 2020 at 04:52:01PM +0800, Chunfeng Yun wrote:
> Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v2: modify description and compatible
> ---
>  .../bindings/phy/mediatek,tphy.yaml           | 263 ++++++++++++++++++
>  .../devicetree/bindings/phy/phy-mtk-tphy.txt  | 162 -----------
>  2 files changed, 263 insertions(+), 162 deletions(-)
>  create mode 100755 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> new file mode 100755
> index 000000000000..56ad8be69095
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> @@ -0,0 +1,263 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek T-PHY Controller Device Tree Bindings
> +
> +maintainers:
> +  - Chunfeng Yun <chunfeng.yun@mediatek.com>
> +
> +description: |
> +  The T-PHY controller supports physical layer functionality for a number of
> +  controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
> +
> +  Layout differences of banks between T-PHY V1 (mt8173/mt2701) and
> +  T-PHY V2 (mt2712) when works on USB mode:
> +  -----------------------------------
> +  Version 1:
> +  port        offset    bank
> +  shared      0x0000    SPLLC
> +              0x0100    FMREG
> +  u2 port0    0x0800    U2PHY_COM
> +  u3 port0    0x0900    U3PHYD
> +              0x0a00    U3PHYD_BANK2
> +              0x0b00    U3PHYA
> +              0x0c00    U3PHYA_DA
> +  u2 port1    0x1000    U2PHY_COM
> +  u3 port1    0x1100    U3PHYD
> +              0x1200    U3PHYD_BANK2
> +              0x1300    U3PHYA
> +              0x1400    U3PHYA_DA
> +  u2 port2    0x1800    U2PHY_COM
> +              ...
> +
> +  Version 2:
> +  port        offset    bank
> +  u2 port0    0x0000    MISC
> +              0x0100    FMREG
> +              0x0300    U2PHY_COM
> +  u3 port0    0x0700    SPLLC
> +              0x0800    CHIP
> +              0x0900    U3PHYD
> +              0x0a00    U3PHYD_BANK2
> +              0x0b00    U3PHYA
> +              0x0c00    U3PHYA_DA
> +  u2 port1    0x1000    MISC
> +              0x1100    FMREG
> +              0x1300    U2PHY_COM
> +  u3 port1    0x1700    SPLLC
> +              0x1800    CHIP
> +              0x1900    U3PHYD
> +              0x1a00    U3PHYD_BANK2
> +              0x1b00    U3PHYA
> +              0x1c00    U3PHYA_DA
> +  u2 port2    0x2000    MISC
> +              ...
> +
> +  SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back
> +  into each port; a new bank MISC for u2 ports and CHIP for u3 ports are
> +  added on V2.
> +
> +properties:
> +  $nodename:
> +     pattern: "^t-phy@[0-9a-f]+$"

Wrong indentation. Should be 1 less.

> +
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - mediatek,mt2701-tphy
> +              - mediatek,mt7623-tphy
> +              - mediatek,mt7622-tphy
> +              - mediatek,mt8516-tphy
> +          - const: mediatek,generic-tphy-v1
> +      - items:
> +          - enum:
> +              - mediatek,mt2712-tphy
> +              - mediatek,mt7629-tphy
> +              - mediatek,mt8183-tphy
> +          - const: mediatek,generic-tphy-v2
> +      - const: mediatek,mt2701-u3phy
> +        deprecated: true
> +      - const: mediatek,mt2712-u3phy
> +        deprecated: true
> +      - const: mediatek,mt8173-u3phy
> +
> +  reg:
> +    description: |

Don't need '|' if there's no formatting to preserve.

> +      Register shared by multiple ports, exclude port's private register.
> +      It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
> +      T-PHY V2, such as mt2712.
> +    maxItems: 1
> +
> +  "#address-cells":
> +      enum: [1, 2]
> +
> +  "#size-cells":
> +      enum: [1, 2]

Wrong indent.

> +
> +  # Used with non-empty value if optional 'reg' is not provided.
> +  # The format of the value is an arbitrary number of triplets of
> +  # (child-bus-address, parent-bus-address, length).
> +  ranges: true
> +
> +  mediatek,src-ref-clk-mhz:
> +    description:
> +      Frequency of reference clock for slew rate calibrate
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 26
> +
> +  mediatek,src-coef:
> +    description:
> +      Coefficient for slew rate calibrate, depends on SoC process
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 28
> +
> +# Required child node:
> +patternProperties:
> +  "^usb-phy@[0-9a-f]+$":
> +    type: object
> +    description: |
> +      A sub-node is required for each port the controller provides.
> +      Address range information including the usual 'reg' property
> +      is used inside these nodes to describe the controller's topology.
> +
> +    properties:
> +      reg:
> +        maxItems: 1
> +
> +      clocks:
> +        minItems: 1
> +        maxItems: 2
> +        items:
> +          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
> +          - description: Reference clock of analog phy
> +        description: |
> +          Uses both clocks if the clock of analog and digital phys are
> +          separated, otherwise uses "ref" clock only if needed.
> +
> +      clock-names:
> +        minItems: 1
> +        maxItems: 2
> +        items:
> +          - const: ref
> +          - const: da_ref
> +
> +      "#phy-cells":
> +        const: 1
> +        description: |
> +          The cells contain the following arguments.
> +
> +          - description: The PHY type
> +              enum:
> +                - PHY_TYPE_USB2
> +                - PHY_TYPE_USB3
> +                - PHY_TYPE_PCIE
> +                - PHY_TYPE_SATA
> +
> +      #The following optional vendor properties are only for debug or HQA test

space     ^

> +      mediatek,eye-src:
> +        description:
> +          The value of slew rate calibrate (U2 phy)
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 1
> +        maximum: 7
> +
> +      mediatek,eye-vrt:
> +        description:
> +          The selection of VRT reference voltage (U2 phy)
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 1
> +        maximum: 7
> +
> +      mediatek,eye-term:
> +        description:
> +          The selection of HS_TX TERM reference voltage (U2 phy)
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 1
> +        maximum: 7
> +
> +      mediatek,intr:
> +        description:
> +          The selection of internal resistor (U2 phy)
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 1
> +        maximum: 31
> +
> +      mediatek,discth:
> +        description:
> +          The selection of disconnect threshold (U2 phy)
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        minimum: 1
> +        maximum: 15
> +
> +      mediatek,bc12:
> +        description:
> +          Specify the flag to enable BC1.2 if support it
> +        type: boolean
> +
> +    required:
> +      - reg
> +      - "#phy-cells"
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/mt8173-clk.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/phy/phy.h>
> +    susb: usb@11271000 {

Drop unused labels.

> +        compatible = "mediatek,mt8173-mtu3";
> +        reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
> +        reg-names = "mac", "ippc";
> +        phys = <&u2port0 PHY_TYPE_USB2>,
> +               <&u3port0 PHY_TYPE_USB3>,
> +               <&u2port1 PHY_TYPE_USB2>;
> +        interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> +    };
> +
> +    u3phy: t-phy@11290000 {
> +        compatible = "mediatek,mt8173-u3phy";
> +        reg = <0x11290000 0x800>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges;
> +        status = "okay";

Don't show status in examples.

> +
> +        u2port0: usb-phy@11290800 {
> +            reg = <0x11290800 0x100>;
> +            clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>;
> +            clock-names = "ref", "da_ref";
> +            #phy-cells = <1>;
> +            status = "okay";
> +        };
> +
> +        u3port0: usb-phy@11290900 {
> +            reg = <0x11290900 0x700>;
> +            clocks = <&clk26m>;
> +            clock-names = "ref";
> +            #phy-cells = <1>;
> +            status = "okay";
> +        };
> +
> +        u2port1: usb-phy@11291000 {
> +            reg = <0x11291000 0x100>;
> +            #phy-cells = <1>;
> +            status = "okay";
> +        };
> +    };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> deleted file mode 100644
> index dd75b676b71d..000000000000
> --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> +++ /dev/null
> @@ -1,162 +0,0 @@
> -MediaTek T-PHY binding
> ---------------------------
> -
> -T-phy controller supports physical layer functionality for a number of
> -controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
> -
> -Required properties (controller (parent) node):
> - - compatible	: should be one of
> -		  "mediatek,generic-tphy-v1"
> -		  "mediatek,generic-tphy-v2"
> -		  "mediatek,mt2701-u3phy" (deprecated)
> -		  "mediatek,mt2712-u3phy" (deprecated)
> -		  "mediatek,mt8173-u3phy";
> -		  make use of "mediatek,generic-tphy-v1" on mt2701 instead and
> -		  "mediatek,generic-tphy-v2" on mt2712 instead.
> -
> -- #address-cells:	the number of cells used to represent physical
> -		base addresses.
> -- #size-cells:	the number of cells used to represent the size of an address.
> -- ranges:	the address mapping relationship to the parent, defined with
> -		- empty value: if optional 'reg' is used.
> -		- non-empty value: if optional 'reg' is not used. should set
> -			the child's base address to 0, the physical address
> -			within parent's address space, and the length of
> -			the address map.
> -
> -Required nodes	: a sub-node is required for each port the controller
> -		  provides. Address range information including the usual
> -		  'reg' property is used inside these nodes to describe
> -		  the controller's topology.
> -
> -Optional properties (controller (parent) node):
> - - reg		: offset and length of register shared by multiple ports,
> -		  exclude port's private register. It is needed on mt2701
> -		  and mt8173, but not on mt2712.
> - - mediatek,src-ref-clk-mhz	: frequency of reference clock for slew rate
> -		  calibrate
> - - mediatek,src-coef	: coefficient for slew rate calibrate, depends on
> -		  SoC process
> -
> -Required properties (port (child) node):
> -- reg		: address and length of the register set for the port.
> -- #phy-cells	: should be 1 (See second example)
> -		  cell after port phandle is phy type from:
> -			- PHY_TYPE_USB2
> -			- PHY_TYPE_USB3
> -			- PHY_TYPE_PCIE
> -			- PHY_TYPE_SATA
> -
> -Optional properties (PHY_TYPE_USB2 port (child) node):
> -- clocks	: a list of phandle + clock-specifier pairs, one for each
> -		  entry in clock-names
> -- clock-names	: may contain
> -		  "ref": 48M reference clock for HighSpeed (digital) phy; and 26M
> -			reference clock for SuperSpeed (digital) phy, sometimes is
> -			24M, 25M or 27M, depended on platform.
> -		  "da_ref": the reference clock of analog phy, used if the clocks
> -			of analog and digital phys are separated, otherwise uses
> -			"ref" clock only if needed.
> -
> -- mediatek,eye-src	: u32, the value of slew rate calibrate
> -- mediatek,eye-vrt	: u32, the selection of VRT reference voltage
> -- mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
> -- mediatek,bc12	: bool, enable BC12 of u2phy if support it
> -- mediatek,discth	: u32, the selection of disconnect threshold
> -- mediatek,intr	: u32, the selection of internal R (resistance)
> -
> -Example:
> -
> -u3phy: usb-phy@11290000 {
> -	compatible = "mediatek,mt8173-u3phy";
> -	reg = <0 0x11290000 0 0x800>;
> -	#address-cells = <2>;
> -	#size-cells = <2>;
> -	ranges;
> -
> -	u2port0: usb-phy@11290800 {
> -		reg = <0 0x11290800 0 0x100>;
> -		clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
> -		clock-names = "ref";
> -		#phy-cells = <1>;
> -	};
> -
> -	u3port0: usb-phy@11290900 {
> -		reg = <0 0x11290800 0 0x700>;
> -		clocks = <&clk26m>;
> -		clock-names = "ref";
> -		#phy-cells = <1>;
> -	};
> -
> -	u2port1: usb-phy@11291000 {
> -		reg = <0 0x11291000 0 0x100>;
> -		clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
> -		clock-names = "ref";
> -		#phy-cells = <1>;
> -	};
> -};
> -
> -Specifying phy control of devices
> ----------------------------------
> -
> -Device nodes should specify the configuration required in their "phys"
> -property, containing a phandle to the phy port node and a device type;
> -phy-names for each port are optional.
> -
> -Example:
> -
> -#include <dt-bindings/phy/phy.h>
> -
> -usb30: usb@11270000 {
> -	...
> -	phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
> -	phy-names = "usb2-0", "usb3-0";
> -	...
> -};
> -
> -
> -Layout differences of banks between mt8173/mt2701 and mt2712
> --------------------------------------------------------------
> -mt8173 and mt2701:
> -port        offset    bank
> -shared      0x0000    SPLLC
> -            0x0100    FMREG
> -u2 port0    0x0800    U2PHY_COM
> -u3 port0    0x0900    U3PHYD
> -            0x0a00    U3PHYD_BANK2
> -            0x0b00    U3PHYA
> -            0x0c00    U3PHYA_DA
> -u2 port1    0x1000    U2PHY_COM
> -u3 port1    0x1100    U3PHYD
> -            0x1200    U3PHYD_BANK2
> -            0x1300    U3PHYA
> -            0x1400    U3PHYA_DA
> -u2 port2    0x1800    U2PHY_COM
> -            ...
> -
> -mt2712:
> -port        offset    bank
> -u2 port0    0x0000    MISC
> -            0x0100    FMREG
> -            0x0300    U2PHY_COM
> -u3 port0    0x0700    SPLLC
> -            0x0800    CHIP
> -            0x0900    U3PHYD
> -            0x0a00    U3PHYD_BANK2
> -            0x0b00    U3PHYA
> -            0x0c00    U3PHYA_DA
> -u2 port1    0x1000    MISC
> -            0x1100    FMREG
> -            0x1300    U2PHY_COM
> -u3 port1    0x1700    SPLLC
> -            0x1800    CHIP
> -            0x1900    U3PHYD
> -            0x1a00    U3PHYD_BANK2
> -            0x1b00    U3PHYA
> -            0x1c00    U3PHYA_DA
> -u2 port2    0x2000    MISC
> -            ...
> -
> -    SPLLC shared by u3 ports and FMREG shared by u2 ports on
> -mt8173/mt2701 are put back into each port; a new bank MISC for
> -u2 ports and CHIP for u3 ports are added on mt2712.
> -- 
> 2.18.0
Rob Herring Oct. 16, 2020, 5:05 p.m. UTC | #2
On Tue, Oct 13, 2020 at 04:52:01PM +0800, Chunfeng Yun wrote:
> Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> v2: modify description and compatible
> ---
>  .../bindings/phy/mediatek,tphy.yaml           | 263 ++++++++++++++++++
>  .../devicetree/bindings/phy/phy-mtk-tphy.txt  | 162 -----------
>  2 files changed, 263 insertions(+), 162 deletions(-)
>  create mode 100755 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml

Also, need to fix the mode.

>  delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
Chunfeng Yun Oct. 20, 2020, 2:33 a.m. UTC | #3
On Fri, 2020-10-16 at 12:04 -0500, Rob Herring wrote:
> On Tue, Oct 13, 2020 at 04:52:01PM +0800, Chunfeng Yun wrote:
> > Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > v2: modify description and compatible
> > ---
> >  .../bindings/phy/mediatek,tphy.yaml           | 263 ++++++++++++++++++
> >  .../devicetree/bindings/phy/phy-mtk-tphy.txt  | 162 -----------
> >  2 files changed, 263 insertions(+), 162 deletions(-)
> >  create mode 100755 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> > new file mode 100755
> > index 000000000000..56ad8be69095
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> > @@ -0,0 +1,263 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +# Copyright (c) 2020 MediaTek
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MediaTek T-PHY Controller Device Tree Bindings
> > +
> > +maintainers:
> > +  - Chunfeng Yun <chunfeng.yun@mediatek.com>
> > +
> > +description: |
> > +  The T-PHY controller supports physical layer functionality for a number of
> > +  controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
[...]
> > +properties:
> > +  $nodename:
> > +     pattern: "^t-phy@[0-9a-f]+$"
> 
> Wrong indentation. Should be 1 less.
Yes, will fix it
> 
> > +
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +          - enum:
> > +              - mediatek,mt2701-tphy
> > +              - mediatek,mt7623-tphy
> > +              - mediatek,mt7622-tphy
> > +              - mediatek,mt8516-tphy
> > +          - const: mediatek,generic-tphy-v1
> > +      - items:
> > +          - enum:
> > +              - mediatek,mt2712-tphy
> > +              - mediatek,mt7629-tphy
> > +              - mediatek,mt8183-tphy
> > +          - const: mediatek,generic-tphy-v2
> > +      - const: mediatek,mt2701-u3phy
> > +        deprecated: true
> > +      - const: mediatek,mt2712-u3phy
> > +        deprecated: true
> > +      - const: mediatek,mt8173-u3phy
> > +
> > +  reg:
> > +    description: |
> 
> Don't need '|' if there's no formatting to preserve.
Got it
> 
> > +      Register shared by multiple ports, exclude port's private register.
> > +      It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
> > +      T-PHY V2, such as mt2712.
> > +    maxItems: 1
> > +
> > +  "#address-cells":
> > +      enum: [1, 2]
> > +
> > +  "#size-cells":
> > +      enum: [1, 2]
> 
> Wrong indent.
Will fix it and check it in other patches
> 
> > +
> > +  # Used with non-empty value if optional 'reg' is not provided.
> > +  # The format of the value is an arbitrary number of triplets of
> > +  # (child-bus-address, parent-bus-address, length).
> > +  ranges: true
> > +
> > +  mediatek,src-ref-clk-mhz:
> > +    description:
> > +      Frequency of reference clock for slew rate calibrate
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    default: 26
> > +
> > +  mediatek,src-coef:
> > +    description:
> > +      Coefficient for slew rate calibrate, depends on SoC process
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    default: 28
> > +
> > +# Required child node:
> > +patternProperties:
> > +  "^usb-phy@[0-9a-f]+$":
> > +    type: object
> > +    description: |
> > +      A sub-node is required for each port the controller provides.
> > +      Address range information including the usual 'reg' property
> > +      is used inside these nodes to describe the controller's topology.
> > +
> > +    properties:
> > +      reg:
> > +        maxItems: 1
> > +
> > +      clocks:
> > +        minItems: 1
> > +        maxItems: 2
> > +        items:
> > +          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
> > +          - description: Reference clock of analog phy
> > +        description: |
> > +          Uses both clocks if the clock of analog and digital phys are
> > +          separated, otherwise uses "ref" clock only if needed.
> > +
> > +      clock-names:
> > +        minItems: 1
> > +        maxItems: 2
> > +        items:
> > +          - const: ref
> > +          - const: da_ref
> > +
> > +      "#phy-cells":
> > +        const: 1
> > +        description: |
> > +          The cells contain the following arguments.
> > +
> > +          - description: The PHY type
> > +              enum:
> > +                - PHY_TYPE_USB2
> > +                - PHY_TYPE_USB3
> > +                - PHY_TYPE_PCIE
> > +                - PHY_TYPE_SATA
> > +
> > +      #The following optional vendor properties are only for debug or HQA test
> 
> space     ^
Ok, will add it
> 
> > +      mediatek,eye-src:
> > +        description:
> > +          The value of slew rate calibrate (U2 phy)
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        minimum: 1
> > +        maximum: 7
> > +
> > +      mediatek,eye-vrt:
> > +        description:
> > +          The selection of VRT reference voltage (U2 phy)
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        minimum: 1
> > +        maximum: 7
> > +
> > +      mediatek,eye-term:
> > +        description:
> > +          The selection of HS_TX TERM reference voltage (U2 phy)
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        minimum: 1
> > +        maximum: 7
> > +
> > +      mediatek,intr:
> > +        description:
> > +          The selection of internal resistor (U2 phy)
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        minimum: 1
> > +        maximum: 31
> > +
> > +      mediatek,discth:
> > +        description:
> > +          The selection of disconnect threshold (U2 phy)
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        minimum: 1
> > +        maximum: 15
> > +
> > +      mediatek,bc12:
> > +        description:
> > +          Specify the flag to enable BC1.2 if support it
> > +        type: boolean
> > +
> > +    required:
> > +      - reg
> > +      - "#phy-cells"
> > +
> > +    additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +  - ranges
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/mt8173-clk.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/phy/phy.h>
> > +    susb: usb@11271000 {
> 
> Drop unused labels.
Ok
> 
> > +        compatible = "mediatek,mt8173-mtu3";
> > +        reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
> > +        reg-names = "mac", "ippc";
> > +        phys = <&u2port0 PHY_TYPE_USB2>,
> > +               <&u3port0 PHY_TYPE_USB3>,
> > +               <&u2port1 PHY_TYPE_USB2>;
> > +        interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
> > +    };
> > +
> > +    u3phy: t-phy@11290000 {
> > +        compatible = "mediatek,mt8173-u3phy";
> > +        reg = <0x11290000 0x800>;
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
> > +        ranges;
> > +        status = "okay";
> 
> Don't show status in examples.
Ok, will remove it

Thanks a lot

> 
> > +
> > +        u2port0: usb-phy@11290800 {
> > +            reg = <0x11290800 0x100>;
> > +            clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>;
> > +            clock-names = "ref", "da_ref";
> > +            #phy-cells = <1>;
> > +            status = "okay";
> > +        };
[...]
> > 2.18.0
Chunfeng Yun Oct. 20, 2020, 2:34 a.m. UTC | #4
On Fri, 2020-10-16 at 12:05 -0500, Rob Herring wrote:
> On Tue, Oct 13, 2020 at 04:52:01PM +0800, Chunfeng Yun wrote:
> > Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml
> > 
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > v2: modify description and compatible
> > ---
> >  .../bindings/phy/mediatek,tphy.yaml           | 263 ++++++++++++++++++
> >  .../devicetree/bindings/phy/phy-mtk-tphy.txt  | 162 -----------
> >  2 files changed, 263 insertions(+), 162 deletions(-)
> >  create mode 100755 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
> 
> Also, need to fix the mode.
Ok, thanks

> 
> >  delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
new file mode 100755
index 000000000000..56ad8be69095
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -0,0 +1,263 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 MediaTek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek T-PHY Controller Device Tree Bindings
+
+maintainers:
+  - Chunfeng Yun <chunfeng.yun@mediatek.com>
+
+description: |
+  The T-PHY controller supports physical layer functionality for a number of
+  controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
+
+  Layout differences of banks between T-PHY V1 (mt8173/mt2701) and
+  T-PHY V2 (mt2712) when works on USB mode:
+  -----------------------------------
+  Version 1:
+  port        offset    bank
+  shared      0x0000    SPLLC
+              0x0100    FMREG
+  u2 port0    0x0800    U2PHY_COM
+  u3 port0    0x0900    U3PHYD
+              0x0a00    U3PHYD_BANK2
+              0x0b00    U3PHYA
+              0x0c00    U3PHYA_DA
+  u2 port1    0x1000    U2PHY_COM
+  u3 port1    0x1100    U3PHYD
+              0x1200    U3PHYD_BANK2
+              0x1300    U3PHYA
+              0x1400    U3PHYA_DA
+  u2 port2    0x1800    U2PHY_COM
+              ...
+
+  Version 2:
+  port        offset    bank
+  u2 port0    0x0000    MISC
+              0x0100    FMREG
+              0x0300    U2PHY_COM
+  u3 port0    0x0700    SPLLC
+              0x0800    CHIP
+              0x0900    U3PHYD
+              0x0a00    U3PHYD_BANK2
+              0x0b00    U3PHYA
+              0x0c00    U3PHYA_DA
+  u2 port1    0x1000    MISC
+              0x1100    FMREG
+              0x1300    U2PHY_COM
+  u3 port1    0x1700    SPLLC
+              0x1800    CHIP
+              0x1900    U3PHYD
+              0x1a00    U3PHYD_BANK2
+              0x1b00    U3PHYA
+              0x1c00    U3PHYA_DA
+  u2 port2    0x2000    MISC
+              ...
+
+  SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back
+  into each port; a new bank MISC for u2 ports and CHIP for u3 ports are
+  added on V2.
+
+properties:
+  $nodename:
+     pattern: "^t-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-tphy
+              - mediatek,mt7623-tphy
+              - mediatek,mt7622-tphy
+              - mediatek,mt8516-tphy
+          - const: mediatek,generic-tphy-v1
+      - items:
+          - enum:
+              - mediatek,mt2712-tphy
+              - mediatek,mt7629-tphy
+              - mediatek,mt8183-tphy
+          - const: mediatek,generic-tphy-v2
+      - const: mediatek,mt2701-u3phy
+        deprecated: true
+      - const: mediatek,mt2712-u3phy
+        deprecated: true
+      - const: mediatek,mt8173-u3phy
+
+  reg:
+    description: |
+      Register shared by multiple ports, exclude port's private register.
+      It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
+      T-PHY V2, such as mt2712.
+    maxItems: 1
+
+  "#address-cells":
+      enum: [1, 2]
+
+  "#size-cells":
+      enum: [1, 2]
+
+  # Used with non-empty value if optional 'reg' is not provided.
+  # The format of the value is an arbitrary number of triplets of
+  # (child-bus-address, parent-bus-address, length).
+  ranges: true
+
+  mediatek,src-ref-clk-mhz:
+    description:
+      Frequency of reference clock for slew rate calibrate
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 26
+
+  mediatek,src-coef:
+    description:
+      Coefficient for slew rate calibrate, depends on SoC process
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 28
+
+# Required child node:
+patternProperties:
+  "^usb-phy@[0-9a-f]+$":
+    type: object
+    description: |
+      A sub-node is required for each port the controller provides.
+      Address range information including the usual 'reg' property
+      is used inside these nodes to describe the controller's topology.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clocks:
+        minItems: 1
+        maxItems: 2
+        items:
+          - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
+          - description: Reference clock of analog phy
+        description: |
+          Uses both clocks if the clock of analog and digital phys are
+          separated, otherwise uses "ref" clock only if needed.
+
+      clock-names:
+        minItems: 1
+        maxItems: 2
+        items:
+          - const: ref
+          - const: da_ref
+
+      "#phy-cells":
+        const: 1
+        description: |
+          The cells contain the following arguments.
+
+          - description: The PHY type
+              enum:
+                - PHY_TYPE_USB2
+                - PHY_TYPE_USB3
+                - PHY_TYPE_PCIE
+                - PHY_TYPE_SATA
+
+      #The following optional vendor properties are only for debug or HQA test
+      mediatek,eye-src:
+        description:
+          The value of slew rate calibrate (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-vrt:
+        description:
+          The selection of VRT reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,eye-term:
+        description:
+          The selection of HS_TX TERM reference voltage (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 7
+
+      mediatek,intr:
+        description:
+          The selection of internal resistor (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 31
+
+      mediatek,discth:
+        description:
+          The selection of disconnect threshold (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 15
+
+      mediatek,bc12:
+        description:
+          Specify the flag to enable BC1.2 if support it
+        type: boolean
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    susb: usb@11271000 {
+        compatible = "mediatek,mt8173-mtu3";
+        reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
+        reg-names = "mac", "ippc";
+        phys = <&u2port0 PHY_TYPE_USB2>,
+               <&u3port0 PHY_TYPE_USB3>,
+               <&u2port1 PHY_TYPE_USB2>;
+        interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+    };
+
+    u3phy: t-phy@11290000 {
+        compatible = "mediatek,mt8173-u3phy";
+        reg = <0x11290000 0x800>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        status = "okay";
+
+        u2port0: usb-phy@11290800 {
+            reg = <0x11290800 0x100>;
+            clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>;
+            clock-names = "ref", "da_ref";
+            #phy-cells = <1>;
+            status = "okay";
+        };
+
+        u3port0: usb-phy@11290900 {
+            reg = <0x11290900 0x700>;
+            clocks = <&clk26m>;
+            clock-names = "ref";
+            #phy-cells = <1>;
+            status = "okay";
+        };
+
+        u2port1: usb-phy@11291000 {
+            reg = <0x11291000 0x100>;
+            #phy-cells = <1>;
+            status = "okay";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
deleted file mode 100644
index dd75b676b71d..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
+++ /dev/null
@@ -1,162 +0,0 @@ 
-MediaTek T-PHY binding
---------------------------
-
-T-phy controller supports physical layer functionality for a number of
-controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
-
-Required properties (controller (parent) node):
- - compatible	: should be one of
-		  "mediatek,generic-tphy-v1"
-		  "mediatek,generic-tphy-v2"
-		  "mediatek,mt2701-u3phy" (deprecated)
-		  "mediatek,mt2712-u3phy" (deprecated)
-		  "mediatek,mt8173-u3phy";
-		  make use of "mediatek,generic-tphy-v1" on mt2701 instead and
-		  "mediatek,generic-tphy-v2" on mt2712 instead.
-
-- #address-cells:	the number of cells used to represent physical
-		base addresses.
-- #size-cells:	the number of cells used to represent the size of an address.
-- ranges:	the address mapping relationship to the parent, defined with
-		- empty value: if optional 'reg' is used.
-		- non-empty value: if optional 'reg' is not used. should set
-			the child's base address to 0, the physical address
-			within parent's address space, and the length of
-			the address map.
-
-Required nodes	: a sub-node is required for each port the controller
-		  provides. Address range information including the usual
-		  'reg' property is used inside these nodes to describe
-		  the controller's topology.
-
-Optional properties (controller (parent) node):
- - reg		: offset and length of register shared by multiple ports,
-		  exclude port's private register. It is needed on mt2701
-		  and mt8173, but not on mt2712.
- - mediatek,src-ref-clk-mhz	: frequency of reference clock for slew rate
-		  calibrate
- - mediatek,src-coef	: coefficient for slew rate calibrate, depends on
-		  SoC process
-
-Required properties (port (child) node):
-- reg		: address and length of the register set for the port.
-- #phy-cells	: should be 1 (See second example)
-		  cell after port phandle is phy type from:
-			- PHY_TYPE_USB2
-			- PHY_TYPE_USB3
-			- PHY_TYPE_PCIE
-			- PHY_TYPE_SATA
-
-Optional properties (PHY_TYPE_USB2 port (child) node):
-- clocks	: a list of phandle + clock-specifier pairs, one for each
-		  entry in clock-names
-- clock-names	: may contain
-		  "ref": 48M reference clock for HighSpeed (digital) phy; and 26M
-			reference clock for SuperSpeed (digital) phy, sometimes is
-			24M, 25M or 27M, depended on platform.
-		  "da_ref": the reference clock of analog phy, used if the clocks
-			of analog and digital phys are separated, otherwise uses
-			"ref" clock only if needed.
-
-- mediatek,eye-src	: u32, the value of slew rate calibrate
-- mediatek,eye-vrt	: u32, the selection of VRT reference voltage
-- mediatek,eye-term	: u32, the selection of HS_TX TERM reference voltage
-- mediatek,bc12	: bool, enable BC12 of u2phy if support it
-- mediatek,discth	: u32, the selection of disconnect threshold
-- mediatek,intr	: u32, the selection of internal R (resistance)
-
-Example:
-
-u3phy: usb-phy@11290000 {
-	compatible = "mediatek,mt8173-u3phy";
-	reg = <0 0x11290000 0 0x800>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-
-	u2port0: usb-phy@11290800 {
-		reg = <0 0x11290800 0 0x100>;
-		clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
-		clock-names = "ref";
-		#phy-cells = <1>;
-	};
-
-	u3port0: usb-phy@11290900 {
-		reg = <0 0x11290800 0 0x700>;
-		clocks = <&clk26m>;
-		clock-names = "ref";
-		#phy-cells = <1>;
-	};
-
-	u2port1: usb-phy@11291000 {
-		reg = <0 0x11291000 0 0x100>;
-		clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
-		clock-names = "ref";
-		#phy-cells = <1>;
-	};
-};
-
-Specifying phy control of devices
----------------------------------
-
-Device nodes should specify the configuration required in their "phys"
-property, containing a phandle to the phy port node and a device type;
-phy-names for each port are optional.
-
-Example:
-
-#include <dt-bindings/phy/phy.h>
-
-usb30: usb@11270000 {
-	...
-	phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
-	phy-names = "usb2-0", "usb3-0";
-	...
-};
-
-
-Layout differences of banks between mt8173/mt2701 and mt2712
--------------------------------------------------------------
-mt8173 and mt2701:
-port        offset    bank
-shared      0x0000    SPLLC
-            0x0100    FMREG
-u2 port0    0x0800    U2PHY_COM
-u3 port0    0x0900    U3PHYD
-            0x0a00    U3PHYD_BANK2
-            0x0b00    U3PHYA
-            0x0c00    U3PHYA_DA
-u2 port1    0x1000    U2PHY_COM
-u3 port1    0x1100    U3PHYD
-            0x1200    U3PHYD_BANK2
-            0x1300    U3PHYA
-            0x1400    U3PHYA_DA
-u2 port2    0x1800    U2PHY_COM
-            ...
-
-mt2712:
-port        offset    bank
-u2 port0    0x0000    MISC
-            0x0100    FMREG
-            0x0300    U2PHY_COM
-u3 port0    0x0700    SPLLC
-            0x0800    CHIP
-            0x0900    U3PHYD
-            0x0a00    U3PHYD_BANK2
-            0x0b00    U3PHYA
-            0x0c00    U3PHYA_DA
-u2 port1    0x1000    MISC
-            0x1100    FMREG
-            0x1300    U2PHY_COM
-u3 port1    0x1700    SPLLC
-            0x1800    CHIP
-            0x1900    U3PHYD
-            0x1a00    U3PHYD_BANK2
-            0x1b00    U3PHYA
-            0x1c00    U3PHYA_DA
-u2 port2    0x2000    MISC
-            ...
-
-    SPLLC shared by u3 ports and FMREG shared by u2 ports on
-mt8173/mt2701 are put back into each port; a new bank MISC for
-u2 ports and CHIP for u3 ports are added on mt2712.