diff mbox series

dt-bindings: tas2770: Fix I2C addresses for the TAS2770

Message ID 20200918164320.11577-1-dmurphy@ti.com
State Superseded
Headers show
Series dt-bindings: tas2770: Fix I2C addresses for the TAS2770 | expand

Checks

Context Check Description
robh/dt-meta-schema success
robh/checkpatch warning total: 0 errors, 1 warnings, 19 lines checked

Commit Message

Dan Murphy Sept. 18, 2020, 4:43 p.m. UTC
The I2C addresses listed in the yaml are not correct. The addresses can
range from 0x41 through 0x48 based on register configurations. Fix the
example and the description.

Fixes: 4b7151dadfd4 ("dt-bindings: ASoC: Add tas2770 smart PA dt bindings")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 Documentation/devicetree/bindings/sound/tas2770.yaml | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Dan Murphy Sept. 18, 2020, 7:13 p.m. UTC | #1
All

On 9/18/20 11:43 AM, Dan Murphy wrote:
> The I2C addresses listed in the yaml are not correct. The addresses can
> range from 0x41 through 0x48 based on register configurations. Fix the
> example and the description.

Please ignore this patch I added this patch intp a different patch 
series because there were just that many fixes.

https://lore.kernel.org/patchwork/project/lkml/list/?series=463738

Dan
Mark Brown Sept. 22, 2020, 12:05 a.m. UTC | #2
On Fri, 18 Sep 2020 11:43:20 -0500, Dan Murphy wrote:
> The I2C addresses listed in the yaml are not correct. The addresses can
> range from 0x41 through 0x48 based on register configurations. Fix the
> example and the description.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] dt-bindings: tas2770: Fix I2C addresses for the TAS2770
      commit: b23d9eb897a1209e4d741fd69e5490f1b5b9e7cf

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
index 33a90f829c80..bb26d081c9fa 100644
--- a/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -24,7 +24,7 @@  properties:
   reg:
     maxItems: 1
     description: |
-       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+       I2C address of the device can be between 0x41 to 0x48.
 
   reset-gpio:
     description: GPIO used to reset the device.
@@ -62,9 +62,9 @@  examples:
    i2c0 {
      #address-cells = <1>;
      #size-cells = <0>;
-     codec: codec@4c {
+     codec: codec@41 {
        compatible = "ti,tas2770";
-       reg = <0x4c>;
+       reg = <0x41>;
        #sound-dai-cells = <1>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;