diff mbox series

[02/11] dt-bindings: extcon: ptn5150: Use generic "interrupts" property

Message ID 20200812162958.6180-2-krzk@kernel.org
State Superseded
Headers show
Series [01/11] dt-bindings: extcon: ptn5150: Convert binding to DT schema | expand

Checks

Context Check Description
robh/dt-meta-schema success
robh/checkpatch success

Commit Message

Krzysztof Kozlowski Aug. 12, 2020, 4:29 p.m. UTC
Interrupts do not have to be always GPIO based so instead of expecting
"int-gpios" property and converting the GPIO to an interrupt, just
accept any interrupt via generic "interrupts" property.

Mark the old "int-gpios" as deprecated.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../devicetree/bindings/extcon/extcon-ptn5150.yaml    | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
index f6316f12028b..1ddc97db3e61 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -19,8 +19,13 @@  properties:
     const: nxp,ptn5150
 
   int-gpios:
+    deprecated: true
     description:
       GPIO pin (input) connected to the PTN5150's INTB pin.
+      Use "interrupts" instead.
+
+  interrupts:
+    maxItems: 1
 
   reg:
     maxItems: 1
@@ -31,7 +36,7 @@  properties:
 
 required:
   - compatible
-  - int-gpios
+  - interrupts
   - reg
   - vbus-gpios
 
@@ -40,6 +45,7 @@  additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -47,7 +53,8 @@  examples:
         ptn5150@1d {
             compatible = "nxp,ptn5150";
             reg = <0x1d>;
-            int-gpios = <&msmgpio 78 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&msmgpio>;
+            interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
             vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
         };
     };