diff mbox series

dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's J7200 devices

Message ID 20200802070114.9624-1-faiz_abbas@ti.com
State Not Applicable
Headers show
Series dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's J7200 devices | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Faiz Abbas Aug. 2, 2020, 7:01 a.m. UTC
Add binding documentation for mmc host controllers present on
TI's J7200 SOC

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
 Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Comments

Rob Herring Aug. 17, 2020, 9:17 p.m. UTC | #1
On Sun, 02 Aug 2020 12:31:14 +0530, Faiz Abbas wrote:
> Add binding documentation for mmc host controllers present on
> TI's J7200 SOC
> 
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
>  Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
Faiz Abbas Aug. 20, 2020, 7:06 a.m. UTC | #2
Hi Ulf,

On 18/08/20 2:47 am, Rob Herring wrote:
> On Sun, 02 Aug 2020 12:31:14 +0530, Faiz Abbas wrote:
>> Add binding documentation for mmc host controllers present on
>> TI's J7200 SOC
>>
>> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
>> ---
>>  Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
>>  1 file changed, 5 insertions(+), 1 deletion(-)
>>
> 
> Acked-by: Rob Herring <robh@kernel.org>
> 

Can you pick this up now or should I rebase to latest?

Thanks,
Faiz
Ulf Hansson Aug. 21, 2020, 1:03 p.m. UTC | #3
On Sun, 2 Aug 2020 at 09:01, Faiz Abbas <faiz_abbas@ti.com> wrote:
>
> Add binding documentation for mmc host controllers present on
> TI's J7200 SOC
>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> index 6d202f4d9249..b49cbfdd679f 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> @@ -12,6 +12,8 @@ Required Properties:
>                         "ti,am654-sdhci-5.1": SDHCI on AM654 device.
>                         "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
>                         "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
> +                       "ti,j7200-sdhci-8bit": 8 bit SDHCI on J7200 device.
> +                       "ti,j7200-sdhci-4bit": 4 bit SDHCI on J7200 device.
>         - reg: Must be two entries.
>                 - The first should be the sdhci register space
>                 - The second should the subsystem/phy register space
> @@ -33,7 +35,9 @@ Required Properties:
>           These bindings must be provided otherwise the driver will disable the
>           corresponding speed mode (i.e. all nodes must provide at least -legacy)
>
> -Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
> +Optional Properties (Required for ti,am654-sdhci-5.1,
> +                                 ti,j721e-sdhci-8bit,
> +                                 ti,j7200-sdhci-8bit):
>         - ti,trm-icp: DLL trim select
>         - ti,driver-strength-ohm: driver strength in ohms.
>                                   Valid values are 33, 40, 50, 66 and 100 ohms.
> --
> 2.17.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
index 6d202f4d9249..b49cbfdd679f 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
@@ -12,6 +12,8 @@  Required Properties:
 			"ti,am654-sdhci-5.1": SDHCI on AM654 device.
 			"ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
 			"ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
+			"ti,j7200-sdhci-8bit": 8 bit SDHCI on J7200 device.
+			"ti,j7200-sdhci-4bit": 4 bit SDHCI on J7200 device.
 	- reg: Must be two entries.
 		- The first should be the sdhci register space
 		- The second should the subsystem/phy register space
@@ -33,7 +35,9 @@  Required Properties:
 	  These bindings must be provided otherwise the driver will disable the
 	  corresponding speed mode (i.e. all nodes must provide at least -legacy)
 
-Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
+Optional Properties (Required for ti,am654-sdhci-5.1,
+				  ti,j721e-sdhci-8bit,
+				  ti,j7200-sdhci-8bit):
 	- ti,trm-icp: DLL trim select
 	- ti,driver-strength-ohm: driver strength in ohms.
 				  Valid values are 33, 40, 50, 66 and 100 ohms.