diff mbox series

[v3,1/7] dt-bindings: usb: bdc: Update compatible strings

Message ID 20200722170746.5222-2-alcooperx@gmail.com
State Not Applicable
Headers show
Series usb: bdc: Updates and fixes to the USB BDC driver | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Alan Cooper July 22, 2020, 5:07 p.m. UTC
Remove "brcm,bdc-v0.16" because it was never used on any system.
Add "brcm,bdc-udc-v2" which exists for any STB system with BDC.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 Documentation/devicetree/bindings/usb/brcm,bdc.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Rob Herring July 23, 2020, 5:32 p.m. UTC | #1
On Wed, 22 Jul 2020 13:07:40 -0400, Al Cooper wrote:
> Remove "brcm,bdc-v0.16" because it was never used on any system.
> Add "brcm,bdc-udc-v2" which exists for any STB system with BDC.
> 
> Signed-off-by: Al Cooper <alcooperx@gmail.com>
> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  Documentation/devicetree/bindings/usb/brcm,bdc.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
index 63e63af3bf59..c9f52b97cef1 100644
--- a/Documentation/devicetree/bindings/usb/brcm,bdc.txt
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
@@ -4,7 +4,7 @@  Broadcom USB Device Controller (BDC)
 Required properties:
 
 - compatible: must be one of:
-                "brcm,bdc-v0.16"
+                "brcm,bdc-udc-v2"
                 "brcm,bdc"
 - reg: the base register address and length
 - interrupts: the interrupt line for this controller
@@ -21,7 +21,7 @@  On Broadcom STB platforms, these properties are required:
 Example:
 
         bdc@f0b02000 {
-                compatible = "brcm,bdc-v0.16";
+                compatible = "brcm,bdc-udc-v2";
                 reg = <0xf0b02000 0xfc4>;
                 interrupts = <0x0 0x60 0x0>;
                 phys = <&usbphy_0 0x0>;