diff mbox series

[v3,1/5] dt-bindings: gpio: Convert mrvl-gpio to json-schema

Message ID 20200616223353.993567-2-lkundrak@v3.sk
State Accepted
Headers show
Series DT: Improve validation for Marvell SoCs | expand

Checks

Context Check Description
robh/dt-meta-schema success
robh/checkpatch warning total: 0 errors, 3 warnings, 173 lines checked

Commit Message

Lubomir Rintel June 16, 2020, 10:33 p.m. UTC
This converts the mrvl-gpio binding to DT schema format using json-schema.

Various fixes were done during the conversion, such as adding more
properties that are in fact mandatory or extending the examples to
include child nodes with extra GPIO blocks.

The compatible strings are a mess. It is not clear why so many of them
are needed; the driver doesn't really seem to differentiate between the
models. Some of them, like marvell,pxa93x-gpio and marvell,pxa1928-gpio
are not used at all, so it's not known how many interrupts they utilize.
On the other hand, mrvl,pxa-gpio has been seen in the tree, but it
doesn't end up in any actual DTB file.

In any case -- the schema merely copies whatever was in the original
binding document, so it's hopefully no more wrong that the original.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

---
Changes since v2:
- Don't make ranges property mandatory

Changes since v1:
- Drop marvell,pxa1928-gpio
- Drop ranges from example with no gcb child nodes
- Add default GPL-2.0-only license tag
- Fill in maintainers from MAINTAINERS file

 .../devicetree/bindings/gpio/mrvl-gpio.txt    |  48 -----
 .../devicetree/bindings/gpio/mrvl-gpio.yaml   | 173 ++++++++++++++++++
 2 files changed, 173 insertions(+), 48 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml

Comments

Linus Walleij June 20, 2020, 9:39 p.m. UTC | #1
On Wed, Jun 17, 2020 at 12:33 AM Lubomir Rintel <lkundrak@v3.sk> wrote:

> This converts the mrvl-gpio binding to DT schema format using json-schema.

This looks about right to me:
Acked-by: Linus Walleij <linus.walleij@linaro.org>

I expect Rob will apply it when he's happy with it, else poke me once
he ACKs it.

Yours,
Linus Walleij
Rob Herring July 13, 2020, 6:49 p.m. UTC | #2
On Wed, 17 Jun 2020 00:33:49 +0200, Lubomir Rintel wrote:
> This converts the mrvl-gpio binding to DT schema format using json-schema.
> 
> Various fixes were done during the conversion, such as adding more
> properties that are in fact mandatory or extending the examples to
> include child nodes with extra GPIO blocks.
> 
> The compatible strings are a mess. It is not clear why so many of them
> are needed; the driver doesn't really seem to differentiate between the
> models. Some of them, like marvell,pxa93x-gpio and marvell,pxa1928-gpio
> are not used at all, so it's not known how many interrupts they utilize.
> On the other hand, mrvl,pxa-gpio has been seen in the tree, but it
> doesn't end up in any actual DTB file.
> 
> In any case -- the schema merely copies whatever was in the original
> binding document, so it's hopefully no more wrong that the original.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> 
> ---
> Changes since v2:
> - Don't make ranges property mandatory
> 
> Changes since v1:
> - Drop marvell,pxa1928-gpio
> - Drop ranges from example with no gcb child nodes
> - Add default GPL-2.0-only license tag
> - Fill in maintainers from MAINTAINERS file
> 
>  .../devicetree/bindings/gpio/mrvl-gpio.txt    |  48 -----
>  .../devicetree/bindings/gpio/mrvl-gpio.yaml   | 173 ++++++++++++++++++
>  2 files changed, 173 insertions(+), 48 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
>  create mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
> 

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
deleted file mode 100644
index 30fd2201b3d4c..0000000000000
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ /dev/null
@@ -1,48 +0,0 @@ 
-* Marvell PXA GPIO controller
-
-Required properties:
-- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
-		"intel,pxa27x-gpio", "intel,pxa3xx-gpio",
-		"marvell,pxa93x-gpio", "marvell,mmp-gpio",
-		"marvell,mmp2-gpio" or marvell,pxa1928-gpio.
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all gpio pins.
-  There're three gpio interrupts in arch-pxa, and they're gpio0,
-  gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
-  gpio_mux.
-- interrupt-names : Should be the names of irq resources. Each interrupt
-  uses its own interrupt name, so there should be as many interrupt names
-  as referenced interrupts.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify flags. See gpio.txt for possible
-  values.
-
-Example for a MMP platform:
-
-	gpio: gpio@d4019000 {
-		compatible = "marvell,mmp-gpio";
-		reg = <0xd4019000 0x1000>;
-		interrupts = <49>;
-		interrupt-names = "gpio_mux";
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-      };
-
-Example for a PXA3xx platform:
-
-	gpio: gpio@40e00000 {
-		compatible = "intel,pxa3xx-gpio";
-		reg = <0x40e00000 0x10000>;
-		interrupt-names = "gpio0", "gpio1", "gpio_mux";
-		interrupts = <8 9 10>;
-		gpio-controller;
-		#gpio-cells = <0x2>;
-		interrupt-controller;
-		#interrupt-cells = <0x2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
new file mode 100644
index 0000000000000..4db3b8a3332c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
@@ -0,0 +1,173 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/mrvl-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA GPIO controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+  - Rob Herring <robh+dt@kernel.org>
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - intel,pxa25x-gpio
+              - intel,pxa26x-gpio
+              - intel,pxa27x-gpio
+              - intel,pxa3xx-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 3
+        interrupt-names:
+          items:
+            - const: gpio0
+            - const: gpio1
+            - const: gpio_mux
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,mmp-gpio
+              - marvell,mmp2-gpio
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: gpio_mux
+
+properties:
+  $nodename:
+    pattern: '^gpio@[0-9a-f]+$'
+
+  compatible:
+    enum:
+      - intel,pxa25x-gpio
+      - intel,pxa26x-gpio
+      - intel,pxa27x-gpio
+      - intel,pxa3xx-gpio
+      - marvell,mmp-gpio
+      - marvell,mmp2-gpio
+      - marvell,pxa93x-gpio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupts: true
+
+  interrupt-names: true
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+patternProperties:
+  '^gpio@[0-9a-f]*$':
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupts
+  - interrupt-names
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/pxa-clock.h>
+    gpio@40e00000 {
+        compatible = "intel,pxa3xx-gpio";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x40e00000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupts = <8>, <9>, <10>;
+        interrupt-names = "gpio0", "gpio1", "gpio_mux";
+        clocks = <&clks CLK_GPIO>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+  - |
+    #include <dt-bindings/clock/marvell,pxa910.h>
+    gpio@d4019000 {
+        compatible = "marvell,mmp-gpio";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xd4019000 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupts = <49>;
+        interrupt-names = "gpio_mux";
+        clocks = <&soc_clocks PXA910_CLK_GPIO>;
+        resets = <&soc_clocks PXA910_CLK_GPIO>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        ranges;
+
+        gpio@d4019000 {
+            reg = <0xd4019000 0x4>;
+        };
+
+        gpio@d4019004 {
+            reg = <0xd4019004 0x4>;
+        };
+
+        gpio@d4019008 {
+            reg = <0xd4019008 0x4>;
+        };
+
+        gpio@d4019100 {
+            reg = <0xd4019100 0x4>;
+        };
+     };
+
+...