From patchwork Fri Jun 12 14:18:53 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Thierry Reding X-Patchwork-Id: 1308248 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20161025 header.b=Abpz7w4z; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 49k2tl2xRLz9sSJ for ; Sat, 13 Jun 2020 00:20:15 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726381AbgFLOUM (ORCPT ); Fri, 12 Jun 2020 10:20:12 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54518 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726523AbgFLOUL (ORCPT ); Fri, 12 Jun 2020 10:20:11 -0400 Received: from mail-wm1-x343.google.com (mail-wm1-x343.google.com [IPv6:2a00:1450:4864:20::343]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 227C6C03E96F; Fri, 12 Jun 2020 07:20:10 -0700 (PDT) Received: by mail-wm1-x343.google.com with SMTP id j198so9296557wmj.0; Fri, 12 Jun 2020 07:20:10 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=JFCENFGGkJbXylCYkOetU+Appz4r7d80wzQv23/1YVk=; b=Abpz7w4z2REhs9yDwGzK66FYff/ajoCo+FkloQhSmgcRvRxzgOv5HtFu/0mgY9R9St 8ymb+CyX9vmTIhfdIQr6ogNl4G1JPWkI+BzpNsmAGLwc32/1OkjzMV9cwIAppLNSnCN2 xggJXXip6D840K81EVKAe9JS3GrfyO/BylESUp+H9Sxd8vE0YxZn6lhw/HpiwxS70jlk 9DXKbQzktUXtks8KyJsqW96nMz6to164llbWnqYLN6S461eltCELKOHK+Qjwpevu0qj+ 5Epl/F7fK32U0WzIqo7vPAYE/H0DNOs0LDmVFn9pvRvrt5cmPAVUFVuRQbOEwaG0uSXJ AA1w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=JFCENFGGkJbXylCYkOetU+Appz4r7d80wzQv23/1YVk=; b=mDmJ4ALpCv80V9j+wtJ7VrFffwbiRS52qONsajTnSEY8+eZQnqc3PcpHMGbw1rzzkm Ca9v4+WR9k4O0JJ9oF5Rms2AuaxfXVkzI4hZbmkxG5RQRdvBSrhjFN4+IVVdn8McyJqJ v2seu0mBspYze3L7cUK2kQ/JuXGz65mLmw3EXmD4zGPJH81eXilXVr+PDsoqThCss5IB vO695jgJbNajywgkg19RobZJyaWzFXNW1S608zB4CuaLN6qckdS9n/pgeJkgM4M1fYOw coAml4Y9oS7FMnaoUDhfIicLjJPmF1lVx/dETrhHD693YebrABCbgpwa0uGHPk8WXfmC ulUQ== X-Gm-Message-State: AOAM531ZLxLKjcxyhqQ+NKRlzbzg3oL0m0TBO9HK14DS8yNTJ0x2b5Bw w7Q25tIPpGtm9uGorYdrDIUFwlHf X-Google-Smtp-Source: ABdhPJwngfskGWofMvHJgKQq77Q9xSuNnnx6+0OQTn9FxJhnWcgVaLpal0l7gLJsW7PaSpZMjzSEKQ== X-Received: by 2002:a1c:1d44:: with SMTP id d65mr13394560wmd.179.1591971606398; Fri, 12 Jun 2020 07:20:06 -0700 (PDT) Received: from localhost ([62.96.65.119]) by smtp.gmail.com with ESMTPSA id z9sm8853475wmi.41.2020.06.12.07.20.04 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 12 Jun 2020 07:20:05 -0700 (PDT) From: Thierry Reding To: Rob Herring Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org Subject: [PATCH 28/38] dt-bindings: phy: tegra-xusb: Convert to json-schema Date: Fri, 12 Jun 2020 16:18:53 +0200 Message-Id: <20200612141903.2391044-29-thierry.reding@gmail.com> X-Mailer: git-send-email 2.24.1 In-Reply-To: <20200612141903.2391044-1-thierry.reding@gmail.com> References: <20200612141903.2391044-1-thierry.reding@gmail.com> MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Thierry Reding Convert the Tegra XUSB pad controller bindings from free-form text format to json-schema. Signed-off-by: Thierry Reding --- .../phy/nvidia,tegra124-xusb-padctl.txt | 778 ----- .../phy/nvidia,tegra124-xusb-padctl.yaml | 2800 +++++++++++++++++ 2 files changed, 2800 insertions(+), 778 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt create mode 100644 Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.yaml diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt deleted file mode 100644 index 38c5fa21f435..000000000000 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ /dev/null @@ -1,778 +0,0 @@ -Device tree binding for NVIDIA Tegra XUSB pad controller -======================================================== - -The Tegra XUSB pad controller manages a set of I/O lanes (with differential -signals) which connect directly to pins/pads on the SoC package. Each lane -is controlled by a HW block referred to as a "pad" in the Tegra hardware -documentation. Each such "pad" may control either one or multiple lanes, -and thus contains any logic common to all its lanes. Each lane can be -separately configured and powered up. - -Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or -super-speed USB. Other lanes are for various types of low-speed, full-speed -or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller -contains a software-configurable mux that sits between the I/O controller -ports (e.g. PCIe) and the lanes. - -In addition to per-lane configuration, USB 3.0 ports may require additional -settings on a per-board basis. - -Pads will be represented as children of the top-level XUSB pad controller -device tree node. Each lane exposed by the pad will be represented by its -own subnode and can be referenced by users of the lane using the standard -PHY bindings, as described by the phy-bindings.txt file in this directory. - -The Tegra hardware documentation refers to the connection between the XUSB -pad controller and the XUSB controller as "ports". This is confusing since -"port" is typically used to denote the physical USB receptacle. The device -tree binding in this document uses the term "port" to refer to the logical -abstraction of the signals that are routed to a USB receptacle (i.e. a PHY -for the USB signal, the VBUS power supply, the USB 2.0 companion port for -USB 3.0 receptacles, ...). - -Required properties: --------------------- -- compatible: Must be: - - Tegra124: "nvidia,tegra124-xusb-padctl" - - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl" - - Tegra210: "nvidia,tegra210-xusb-padctl" - - Tegra186: "nvidia,tegra186-xusb-padctl" - - Tegra194: "nvidia,tegra194-xusb-padctl" -- reg: Physical base address and length of the controller's registers. -- resets: Must contain an entry for each entry in reset-names. -- reset-names: Must include the following entries: - - "padctl" - -For Tegra124: -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- avdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. - -For Tegra210: -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. - -For Tegra186: -- avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY - power supply. Must supply 1.8 V. -- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply - 3.3 V. -- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. -- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V. - -For Tegra194: -- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply - 3.3 V. -- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. - -Pad nodes: -========== - -A required child node named "pads" contains a list of subnodes, one for each -of the pads exposed by the XUSB pad controller. Each pad may need additional -resources that can be referenced in its pad node. - -The "status" property is used to enable or disable the use of a pad. If set -to "disabled", the pad will not be used on the given board. In order to use -the pad and any of its lanes, this property must be set to "okay". - -For Tegra124 and Tegra132, the following pads exist: usb2, ulpi, hsic, pcie -and sata. No extra resources are required for operation of these pads. - -For Tegra210, the following pads exist: usb2, hsic, pcie and sata. Below is -a description of the properties of each pad. - -UTMI pad: ---------- - -Required properties: -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must contain the following entries: - - "trk": phandle and specifier referring to the USB2 tracking clock - -HSIC pad: ---------- - -Required properties: -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must contain the following entries: - - "trk": phandle and specifier referring to the HSIC tracking clock - -PCIe pad: ---------- - -Required properties: -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must contain the following entries: - - "pll": phandle and specifier referring to the PLLE -- resets: Must contain an entry for each entry in reset-names. -- reset-names: Must contain the following entries: - - "phy": reset for the PCIe UPHY block - -SATA pad: ---------- - -Required properties: -- resets: Must contain an entry for each entry in reset-names. -- reset-names: Must contain the following entries: - - "phy": reset for the SATA UPHY block - - -PHY nodes: -========== - -Each pad node has a child named "lanes" that contains one or more children of -its own, each representing one of the lanes controlled by the pad. - -Required properties: --------------------- -- status: Defines the operation status of the PHY. Valid values are: - - "disabled": the PHY is disabled - - "okay": the PHY is enabled -- #phy-cells: Should be 0. Since each lane represents a single PHY, there is - no need for an additional specifier. -- nvidia,function: The output function of the PHY. See below for a list of - valid functions per SoC generation. - -For Tegra124 and Tegra132, the list of valid PHY nodes is given below: -- usb2: usb2-0, usb2-1, usb2-2 - - functions: "snps", "xusb", "uart" -- ulpi: ulpi-0 - - functions: "snps", "xusb" -- hsic: hsic-0, hsic-1 - - functions: "snps", "xusb" -- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4 - - functions: "pcie", "usb3-ss" -- sata: sata-0 - - functions: "usb3-ss", "sata" - -For Tegra210, the list of valid PHY nodes is given below: -- usb2: usb2-0, usb2-1, usb2-2, usb2-3 - - functions: "snps", "xusb", "uart" -- hsic: hsic-0, hsic-1 - - functions: "snps", "xusb" -- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, pcie-5, pcie-6 - - functions: "pcie-x1", "usb3-ss", "pcie-x4" -- sata: sata-0 - - functions: "usb3-ss", "sata" - -For Tegra194, the list of valid PHY nodes is given below: -- usb2: usb2-0, usb2-1, usb2-2, usb2-3 - - functions: "xusb" -- usb3: usb3-0, usb3-1, usb3-2, usb3-3 - - functions: "xusb" - -Port nodes: -=========== - -A required child node named "ports" contains a list of all the ports exposed -by the XUSB pad controller. Per-port configuration is only required for USB. - -USB2 ports: ------------ - -Required properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled -- mode: A string that determines the mode in which to run the port. Valid - values are: - - "host": for USB host mode - - "device": for USB device mode - - "otg": for USB OTG mode - -Required properties for OTG/Peripheral capable USB2 ports: -- usb-role-switch: Boolean property to indicate that the port support OTG or - peripheral mode. If present, the port supports switching between USB host - and peripheral roles. Connector should be added as subnode. - See usb/usb-conn-gpio.txt. - -Optional properties: -- nvidia,internal: A boolean property whose presence determines that a port - is internal. In the absence of this property the port is considered to be - external. -- vbus-supply: phandle to a regulator supplying the VBUS voltage. - -ULPI ports: ------------ - -Optional properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled -- nvidia,internal: A boolean property whose presence determines that a port - is internal. In the absence of this property the port is considered to be - external. -- vbus-supply: phandle to a regulator supplying the VBUS voltage. - -HSIC ports: ------------ - -Required properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled - -Optional properties: -- vbus-supply: phandle to a regulator supplying the VBUS voltage. - -Super-speed USB ports: ----------------------- - -Required properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled -- nvidia,usb2-companion: A single cell that specifies the physical port number - to map this super-speed USB port to. The range of valid port numbers varies - with the SoC generation: - - 0-2: for Tegra124 and Tegra132 - - 0-3: for Tegra210 - -Optional properties: -- nvidia,internal: A boolean property whose presence determines that a port - is internal. In the absence of this property the port is considered to be - external. - -- maximum-speed: Only for Tegra194. A string property that specifies maximum - supported speed of a usb3 port. Valid values are: - - "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed. - - "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only. - -For Tegra124 and Tegra132, the XUSB pad controller exposes the following -ports: -- 3x USB2: usb2-0, usb2-1, usb2-2 -- 1x ULPI: ulpi-0 -- 2x HSIC: hsic-0, hsic-1 -- 2x super-speed USB: usb3-0, usb3-1 - -For Tegra210, the XUSB pad controller exposes the following ports: -- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 -- 2x HSIC: hsic-0, hsic-1 -- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 - -For Tegra194, the XUSB pad controller exposes the following ports: -- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 -- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 - -Examples: -========= - -Tegra124 and Tegra132: ----------------------- - -SoC include: - - padctl@7009f000 { - /* for Tegra124 */ - compatible = "nvidia,tegra124-xusb-padctl"; - /* for Tegra132 */ - compatible = "nvidia,tegra132-xusb-padctl", - "nvidia,tegra124-xusb-padctl"; - reg = <0x0 0x7009f000 0x0 0x1000>; - resets = <&tegra_car 142>; - reset-names = "padctl"; - - pads { - usb2 { - status = "disabled"; - - lanes { - usb2-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-2 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - ulpi { - status = "disabled"; - - lanes { - ulpi-0 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - hsic { - status = "disabled"; - - lanes { - hsic-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - hsic-1 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - pcie { - status = "disabled"; - - lanes { - pcie-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-2 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-3 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-4 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - sata { - status = "disabled"; - - lanes { - sata-0 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - }; - - ports { - usb2-0 { - status = "disabled"; - }; - - usb2-1 { - status = "disabled"; - }; - - usb2-2 { - status = "disabled"; - }; - - ulpi-0 { - status = "disabled"; - }; - - hsic-0 { - status = "disabled"; - }; - - hsic-1 { - status = "disabled"; - }; - - usb3-0 { - status = "disabled"; - }; - - usb3-1 { - status = "disabled"; - }; - }; - }; - -Board file: - - padctl@7009f000 { - status = "okay"; - - pads { - usb2 { - status = "okay"; - - lanes { - usb2-0 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-1 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-2 { - nvidia,function = "xusb"; - status = "okay"; - }; - }; - }; - - pcie { - status = "okay"; - - lanes { - pcie-0 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; - - pcie-2 { - nvidia,function = "pcie"; - status = "okay"; - }; - - pcie-4 { - nvidia,function = "pcie"; - status = "okay"; - }; - }; - }; - - sata { - status = "okay"; - - lanes { - sata-0 { - nvidia,function = "sata"; - status = "okay"; - }; - }; - }; - }; - - ports { - /* Micro A/B */ - usb2-0 { - status = "okay"; - mode = "otg"; - }; - - /* Mini PCIe */ - usb2-1 { - status = "okay"; - mode = "host"; - }; - - /* USB3 */ - usb2-2 { - status = "okay"; - mode = "host"; - - vbus-supply = <&vdd_usb3_vbus>; - }; - - usb3-0 { - nvidia,port = <2>; - status = "okay"; - }; - }; - }; - -Tegra210: ---------- - -SoC include: - - padctl@7009f000 { - compatible = "nvidia,tegra210-xusb-padctl"; - reg = <0x0 0x7009f000 0x0 0x1000>; - resets = <&tegra_car 142>; - reset-names = "padctl"; - - status = "disabled"; - - pads { - usb2 { - clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>; - clock-names = "trk"; - status = "disabled"; - - lanes { - usb2-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-2 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-3 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - hsic { - clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>; - clock-names = "trk"; - status = "disabled"; - - lanes { - hsic-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - hsic-1 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - pcie { - clocks = <&tegra_car TEGRA210_CLK_PLL_E>; - clock-names = "pll"; - resets = <&tegra_car 205>; - reset-names = "phy"; - status = "disabled"; - - lanes { - pcie-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-2 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-3 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-4 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-5 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-6 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - sata { - clocks = <&tegra_car TEGRA210_CLK_PLL_E>; - clock-names = "pll"; - resets = <&tegra_car 204>; - reset-names = "phy"; - status = "disabled"; - - lanes { - sata-0 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - }; - - ports { - usb2-0 { - status = "disabled"; - }; - - usb2-1 { - status = "disabled"; - }; - - usb2-2 { - status = "disabled"; - }; - - usb2-3 { - status = "disabled"; - }; - - hsic-0 { - status = "disabled"; - }; - - hsic-1 { - status = "disabled"; - }; - - usb3-0 { - status = "disabled"; - }; - - usb3-1 { - status = "disabled"; - }; - - usb3-2 { - status = "disabled"; - }; - - usb3-3 { - status = "disabled"; - }; - }; - }; - -Board file: - - padctl@7009f000 { - status = "okay"; - - pads { - usb2 { - status = "okay"; - - lanes { - usb2-0 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-1 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-2 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-3 { - nvidia,function = "xusb"; - status = "okay"; - }; - }; - }; - - pcie { - status = "okay"; - - lanes { - pcie-0 { - nvidia,function = "pcie-x1"; - status = "okay"; - }; - - pcie-1 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-2 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-3 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-4 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-5 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; - - pcie-6 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; - }; - }; - - sata { - status = "okay"; - - lanes { - sata-0 { - nvidia,function = "sata"; - status = "okay"; - }; - }; - }; - }; - - ports { - usb2-0 { - status = "okay"; - mode = "otg"; - }; - - usb2-1 { - status = "okay"; - vbus-supply = <&vdd_5v0_rtl>; - mode = "host"; - }; - - usb2-2 { - status = "okay"; - vbus-supply = <&vdd_usb_vbus>; - mode = "host"; - }; - - usb2-3 { - status = "okay"; - mode = "host"; - }; - - usb3-0 { - status = "okay"; - nvidia,lanes = "pcie-6"; - nvidia,port = <1>; - }; - - usb3-1 { - status = "okay"; - nvidia,lanes = "pcie-5"; - nvidia,port = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.yaml new file mode 100644 index 000000000000..8c647fd4a340 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.yaml @@ -0,0 +1,2800 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/nvidia,tegra124-xusb-padctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra XUSB pad controller + +maintainers: + - Thierry Reding + - Jon Hunter + +description: + The Tegra XUSB pad controller manages a set of I/O lanes (with differential + signals) which connect directly to pins/pads on the SoC package. Each lane + is controlled by a HW block referred to as a "pad" in the Tegra hardware + documentation. Each such "pad" may control either one or multiple lanes, + and thus contains any logic common to all its lanes. Each lane can be + separately configured and powered up. + + Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or + super-speed USB. Other lanes are for various types of low-speed, full-speed + or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller + contains a software-configurable mux that sits between the I/O controller + ports (e.g. PCIe) and the lanes. + + In addition to per-lane configuration, USB 3.0 ports may require additional + settings on a per-board basis. + + Pads will be represented as children of the top-level XUSB pad controller + device tree node. Each lane exposed by the pad will be represented by its + own subnode and can be referenced by users of the lane using the standard + PHY bindings, as described by the phy-bindings.txt file in this directory. + + The Tegra hardware documentation refers to the connection between the XUSB + pad controller and the XUSB controller as "ports". This is confusing since + "port" is typically used to denote the physical USB receptacle. The device + tree binding in this document uses the term "port" to refer to the logical + abstraction of the signals that are routed to a USB receptacle (i.e. a PHY + for the USB signal, the VBUS power supply, the USB 2.0 companion port for + USB 3.0 receptacles, ...). + +properties: + compatible: + oneOf: + - items: + - const: nvidia,tegra124-xusb-padctl + + - items: + - const: nvidia,tegra132-xusb-padctl + - const: nvidia,tegra124-xusb-padctl + + - items: + - const: nvidia,tegra210-xusb-padctl + + - items: + - const: nvidia,tegra186-xusb-padctl + + - items: + - const: nvidia,tegra194-xusb-padctl + + resets: + items: + - description: pad controller reset + + reset-names: + items: + - const: padctl + + pads: + description: A required child node named "pads" contains a list of + subnodes, one for each of the pads exposed by the XUSB pad controller. + Each pad may need additional resources that can be referenced in its + pad node. + + The "status" property is used to enable or disable the use of a pad. + If set to "disabled", the pad will not be used on the given board. In + order to use the pad and any of its lanes, this property must be set + to "okay". + type: object + + ports: + type: object + +required: + - compatible + - reg + - resets + - reset-names + +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra124-xusb-padctl + then: + properties: + reg: + maxItems: 1 + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-erefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + avdd-pex-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-pex-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 3.3 V. + + pads: + properties: + usb2: + type: object + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + properties: + usb2-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb, uart ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb2-1: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb, uart ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb2-2: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb, uart ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + ulpi: + type: object + properties: + lanes: + type: object + properties: + ulpi-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + hsic: + type: object + properties: + clocks: + items: + - description: HSIC tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + properties: + hsic-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + hsic-1: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie: + type: object + properties: + clocks: + items: + - description: PLLE clock + + clock-names: + items: + - const: pll + + resets: + items: + - description: reset for the PCIe UPHY block + + reset-names: + items: + - const: phy + + lanes: + type: object + properties: + pcie-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie, usb3-ss ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie-1: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie, usb3-ss ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie-2: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie, usb3-ss ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie-3: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie, usb3-ss ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie-4: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie, usb3-ss ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + sata: + type: object + properties: + resets: + items: + - description: reset for the SATA UPHY block + + reset-names: + items: + - const: phy + + lanes: + type: object + properties: + sata-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ sata, usb3-ss ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + ports: + properties: + usb2-0: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + usb2-1: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + usb2-2: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + ulpi-0: + type: object + properties: + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + hsic-0: + type: object + properties: + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + hsic-1: + type: object + properties: + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + usb3-0: + type: object + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + usb3-1: + type: object + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + additionalProperties: false + + required: + - avdd-pll-utmip-supply + - avdd-pll-erefe-supply + - avdd-pex-pll-supply + - hvdd-pex-pll-e-supply + + - if: + properties: + compatible: + contains: + const: nvidia,tegra210-xusb-padctl + then: + properties: + reg: + maxItems: 1 + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-pex-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-pex-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + + pads: + properties: + usb2: + type: object + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + properties: + usb2-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb, uart ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb2-1: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb, uart ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb2-2: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb, uart ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb2-3: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb, uart ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + hsic: + type: object + properties: + clocks: + items: + - description: HSIC tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + properties: + hsic-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + hsic-1: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ snps, xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie: + type: object + properties: + clocks: + items: + - description: PCIe PLL clock source + + clock-names: + items: + - const: pll + + resets: + items: + - description: PCIe PHY reset + + reset-names: + items: + - const: phy + + lanes: + type: object + properties: + pcie-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie-1: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie-2: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie-3: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie-4: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie-5: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + pcie-6: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + sata: + type: object + properties: + clocks: + items: + - description: SATA PLL clock source + + clock-names: + items: + - const: pll + + resets: + items: + - description: SATA PHY reset + + reset-names: + items: + - const: phy + + lanes: + type: object + properties: + sata-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ usb3-ss, sata ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + ports: + properties: + usb2-0: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + usb2-1: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + usb2-2: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + usb2-3: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + hsic-0: + type: object + properties: + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + hsic-1: + type: object + properties: + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + usb3-0: + type: object + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2, 3 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + usb3-1: + type: object + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2, 3 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + usb3-2: + type: object + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2, 3 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + usb3-3: + type: object + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2, 3 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + additionalProperties: false + + required: + - avdd-pll-utmip-supply + - avdd-pll-uerefe-supply + - dvdd-pex-pll-supply + - hvdd-pex-pll-e-supply + + - if: + properties: + compatible: + contains: + const: nvidia,tegra186-xusb-padctl + then: + properties: + reg: + items: + - description: pad controller registers + - description: AO registers + maxItems: 2 + + reg-names: + items: + - const: padctl + - const: ao + + avdd-pll-erefeut-supply: + description: UPHY brick and reference clock as well as UTMI PHY + power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must + supply 3.3 V. + + vclamp-usb-supply: + description: Bias rail for USB pad. Must supply 1.8 V. + + vddio-hsic-supply: + description: HSIC PHY power supply. Must supply 1.2 V. + + pads: + properties: + usb2: + type: object + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + properties: + usb2-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb2-1: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb2-2: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + hsic: + type: object + properties: + clocks: + items: + - description: HSIC tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + properties: + hsic-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb3: + type: object + properties: + lanes: + type: object + properties: + usb3-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb3-1: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb3-2: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + ports: + type: object + properties: + usb2-0: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + usb2-1: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + usb2-2: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + hsic-0: + type: object + properties: + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb3-0: + type: object + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2, 3 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-1: + type: object + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2, 3 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-2: + type: object + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2, 3 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + required: + - avdd-pll-erefeut-supply + - avdd-usb-supply + - vclamp-usb-supply + - vddio-hsic-supply + + - if: + properties: + compatible: + contains: + const: nvidia,tegra194-xusb-padctl + then: + properties: + reg: + items: + - description: pad controller registers + - description: AO registers + maxItems: 2 + + reg-names: + items: + - const: padctl + - const: ao + + avdd-usb-supply: + description: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must + supply 3.3 V. + + vclamp-usb-supply: + description: Bias rail for USB pad. Must supply 1.8 V. + + pads: + properties: + usb2: + type: object + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + properties: + usb2-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb2-1: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + + usb2-2: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb2-3: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb3: + type: object + properties: + lanes: + type: object + properties: + usb3-0: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb3-1: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb3-2: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + usb3-3: + type: object + properties: + "#phy-cells": + const: 0 + + nvidia,function: + enum: [ xusb ] + + phandle: + $ref: "/schemas/dt-core.yaml#/properties/phandle" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + additionalProperties: false + + additionalProperties: false + + ports: + properties: + usb2-0: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + usb2-1: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + usb2-2: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + usb2-3: + type: object + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + additionalProperties: false + + usb3-0: + type: object + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: "/schemas/types.yaml#/definitions/string" + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2, 3 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + usb3-1: + type: object + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: "/schemas/types.yaml#/definitions/string" + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2, 3 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + usb3-2: + type: object + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: "/schemas/types.yaml#/definitions/string" + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2, 3 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + usb3-3: + type: object + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: "/schemas/types.yaml#/definitions/string" + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: "/schemas/types.yaml#/definitions/flag" + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + enum: [ 0, 1, 2, 3 ] + + status: + $ref: "/schemas/dt-core.yaml#/properties/status" + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + additionalProperties: false + + additionalProperties: false + + required: + - avdd-usb-supply + - vclamp-usb-supply + +unevaluatedProperties: false + +examples: + # Tegra124 and Tegra132 + - | + padctl@7009f000 { + compatible = "nvidia,tegra124-xusb-padctl"; + reg = <0x7009f000 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + + pads { + usb2 { + lanes { + usb2-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + ulpi { + lanes { + ulpi-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + pcie { + lanes { + pcie-0 { + nvidia,function = "usb3-ss"; + #phy-cells = <0>; + }; + + pcie-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-2 { + nvidia,function = "pcie"; + #phy-cells = <0>; + }; + + pcie-3 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-4 { + nvidia,function = "pcie"; + #phy-cells = <0>; + }; + }; + }; + + sata { + lanes { + sata-0 { + nvidia,function = "sata"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + /* Micro A/B */ + usb2-0 { + mode = "otg"; + }; + + /* Mini PCIe */ + usb2-1 { + mode = "host"; + }; + + /* USB3 */ + usb2-2 { + vbus-supply = <&vdd_usb3_vbus>; + mode = "host"; + }; + + ulpi-0 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + nvidia,usb2-companion = <2>; + }; + + usb3-1 { + status = "disabled"; + }; + }; + }; + + # Tegra210 + - | + #include + #include + + padctl@7009f000 { + compatible = "nvidia,tegra210-xusb-padctl"; + reg = <0x7009f000 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + + pads { + usb2 { + clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-3 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + pcie { + clocks = <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "pll"; + resets = <&tegra_car 205>; + reset-names = "phy"; + + lanes { + pcie-0 { + nvidia,function = "pcie-x1"; + #phy-cells = <0>; + }; + + pcie-1 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-2 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-3 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-4 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-5 { + nvidia,function = "usb3-ss"; + #phy-cells = <0>; + }; + + pcie-6 { + nvidia,function = "usb3-ss"; + #phy-cells = <0>; + }; + }; + }; + + sata { + clocks = <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "pll"; + resets = <&tegra_car 204>; + reset-names = "phy"; + + lanes { + sata-0 { + nvidia,function = "sata"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "peripheral"; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpios = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_LOW>; + }; + }; + + usb2-1 { + vbus-supply = <&vdd_5v0_rtl>; + mode = "host"; + }; + + usb2-2 { + vbus-supply = <&vdd_usb_vbus>; + mode = "host"; + }; + + usb2-3 { + mode = "host"; + }; + + hsic-0 { + status = "disabled"; + }; + + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + nvidia,usb2-companion = <1>; + }; + + usb3-1 { + nvidia,usb2-companion = <2>; + }; + + usb3-2 { + status = "disabled"; + }; + + usb3-3 { + status = "disabled"; + }; + }; + }; + + # Tegra186 + - | + #include + #include + #include + + padctl@3520000 { + compatible = "nvidia,tegra186-xusb-padctl"; + reg = <0x03520000 0x1000>, + <0x03540000 0x1000>; + reg-names = "padctl", "ao"; + + resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>; + reset-names = "padctl"; + + avdd-pll-erefeut-supply = <&vdd_1v8_pll>; + avdd-usb-supply = <&vdd_3v3_sys>; + vclamp-usb-supply = <&vdd_1v8>; + vddio-hsic-supply = <&gnd>; + + pads { + usb2 { + clocks = <&bpmp TEGRA186_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + clocks = <&bpmp TEGRA186_CLK_HSIC_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb3-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb3-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "otg"; + vbus-supply = <&vdd_usb0>; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpios = <&gpio TEGRA186_MAIN_GPIO(X, 7) GPIO_ACTIVE_LOW>; + id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; + }; + + usb2-1 { + vbus-supply = <&vdd_usb1>; + mode = "host"; + }; + + usb2-2 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + usb3-0 { + nvidia,usb2-companion = <1>; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + }; + }; + + # Tegra194 + - | + #include + #include + #include + + padctl@3520000 { + compatible = "nvidia,tegra194-xusb-padctl"; + reg = <0x03520000 0x1000>, + <0x03540000 0x1000>; + reg-names = "padctl", "ao"; + + resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>; + reset-names = "padctl"; + + avdd-usb-supply = <&vdd_usb_3v3>; + vclamp-usb-supply = <&vdd_1v8ao>; + + pads { + usb2 { + clocks = <&bpmp TEGRA194_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-3 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-2 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-3 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { + vbus-supply = <&vdd_5v0_sys>; + mode = "host"; + }; + + usb2-2 { + status = "disabled"; + }; + + usb2-3 { + vbus-supply = <&vdd_5v_sata>; + mode = "host"; + }; + + usb3-0 { + vbus-supply = <&vdd_5v0_sys>; + nvidia,usb2-companion = <1>; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + + usb3-3 { + maximum-speed = "super-speed"; + vbus-supply = <&vdd_5v0_sys>; + nvidia,usb2-companion = <3>; + }; + }; + };