diff mbox series

[v2,1/6] dt-bindings: sc16is7xx: Add flag to activate IrDA mode

Message ID 20200519182147.218713-2-daniel@zonque.org
State Superseded
Headers show
Series sc16is7xx: IrDA mode and threaded IRQs | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Daniel Mack May 19, 2020, 6:21 p.m. UTC
From: Pascal Huerst <pascal.huerst@gmail.com>

This series of uart controllers is able to work in IrDA mode.
This adds a property to the device tree to enable that feature on
selected ports if needed.

Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
---
 Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
index c1091a923a89..4d1f55abe876 100644
--- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -21,6 +21,8 @@  Optional properties:
   the second cell is used to specify the GPIO polarity:
     0 = active high,
     1 = active low.
+- linux,irda-mode-ports: An array that lists the indices of the port that
+			 should operate in IrDA mode.
 
 Example:
         sc16is750: sc16is750@51 {
@@ -55,6 +57,8 @@  Optional properties:
   the second cell is used to specify the GPIO polarity:
     0 = active high,
     1 = active low.
+- linux,irda-mode-ports: An array that lists the indices of the port that
+			 should operate in IrDA mode.
 
 Example:
 	sc16is750: sc16is750@0 {