From patchwork Sat May 2 12:21:25 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Adam Ford X-Patchwork-Id: 1281630 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20161025 header.b=jCF0fvZI; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 49DpC85rnQz9sT4 for ; Sat, 2 May 2020 22:21:56 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727931AbgEBMVt (ORCPT ); Sat, 2 May 2020 08:21:49 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38586 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1727815AbgEBMVr (ORCPT ); Sat, 2 May 2020 08:21:47 -0400 Received: from mail-qk1-x741.google.com (mail-qk1-x741.google.com [IPv6:2607:f8b0:4864:20::741]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 13856C061A0C; Sat, 2 May 2020 05:21:47 -0700 (PDT) Received: by mail-qk1-x741.google.com with SMTP id q7so11872508qkf.3; Sat, 02 May 2020 05:21:47 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=Xc+J3gtEQ6bPEPTp0sgpXqx6Tn93A+XqoBLEHYkXhKM=; b=jCF0fvZIPTawUCjHOM7V09c/e61xyhbmprSvjmt5CNWIj1nAVGMPsw9kbKD51QFdWm 03uJGvvUfvsu1dTlTd5/5nN0JnqoTO6CO7EkDY0Hwpn+Vh3+o2qdd+d0QZlUcccxePUr kD9c56Z6Q20pTHpQ4LpUWaehjXgZx7gc3YZoVk4G1aj/9NM1vRxklXIGn7kHXiD+qug3 0hBljFsRm5q1fvpd+Xc4+6Y6bw0VzledqZ7+fna1KmLqDxg8kDwQJa5PaeEax6cMKepS zJ5baYMhXyghH50gxaAGOUP4iHXZZWBd5lxXrd7KeHVTPxiqvTt+O/Rx7sETyK6rXSfW DVXQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=Xc+J3gtEQ6bPEPTp0sgpXqx6Tn93A+XqoBLEHYkXhKM=; b=jH769tSljB2sFSVhzRJ2IXHLs4AS5Io7KScXEbMYELdaGrA7lQPl/aj2Aj3eYw2kAd gkqDfszpmidmBhKnWy/1WoMqbf+xSRf4neBFVgwdDdfcFZPtxS46fvwU957hbR2F37Kg NfIgHMoz9ARE1TfIQA8pUvoX5E5+fm2KGDeXPU1bzyAv6Ccw6sGWyO1I/O/YZMaU5apX PuNytKRcAT1j7y56O2htpWe4NBLF59oHeHnOhS5qAXvpn063Ex8sgUt2//x7ddIP/qKQ +yroOtZ/6oBROeHYBo94pIsuo/S/NgtQBI/ZohWtZYPxToaEBM0ntW02D0L8nXjEkNXV 8E8w== X-Gm-Message-State: AGi0PuY4nrE5zX0jbJjnHW+KJwaerqx2zgpOp5c1EJF4YSJsTFjj2LHw bUU6qljntcdYLe+MzqBcIDYuLulqOOQ= X-Google-Smtp-Source: APiQypKenyB99S4TSSF7qhbgp0pDpPJx8fMkndmgo9aJiw8nzsHsQJPKUOuBihrBg1nimDH4HwY6Vw== X-Received: by 2002:a37:d8e:: with SMTP id 136mr7804191qkn.260.1588422105817; Sat, 02 May 2020 05:21:45 -0700 (PDT) Received: from localhost.localdomain (c-73-37-219-234.hsd1.mn.comcast.net. [73.37.219.234]) by smtp.gmail.com with ESMTPSA id p47sm5256413qta.44.2020.05.02.05.21.44 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 02 May 2020 05:21:45 -0700 (PDT) From: Adam Ford To: linux-clk@vger.kernel.org Cc: aford@beaconembedded.com, charles.stevens@logicpd.com, Adam Ford , Michael Turquette , Stephen Boyd , Rob Herring , Marek Vasut , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH V2 2/3] clk: vc5: Enable addition output configurations of the Versaclock Date: Sat, 2 May 2020 07:21:25 -0500 Message-Id: <20200502122126.188001-2-aford173@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200502122126.188001-1-aford173@gmail.com> References: <20200502122126.188001-1-aford173@gmail.com> MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The existing driver is expecting the Versaclock to be pre-programmed, and only sets the output frequency. Unfortunately, not all devices are pre-programmed, and the Versaclock chip has more options beyond just the frequency. This patch enables the following additional features: - Programmable voltage: 1.8V, 2.5V, or 3.3V​ - Slew Percentage of normal: 85%, 90%, or 100% - Output Type: LVPECL, CMOS, HCSL, or LVDS Signed-off-by: Adam Ford diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c index 81255d923f00..ad99d50b7b16 100644 --- a/drivers/clk/clk-versaclock5.c +++ b/drivers/clk/clk-versaclock5.c @@ -24,6 +24,8 @@ #include #include +#include + /* VersaClock5 registers */ #define VC5_OTP_CONTROL 0x00 @@ -89,6 +91,28 @@ /* Clock control register for clock 1,2 */ #define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n)) +#define VC5_CLK_OUTPUT_CFG0_CFG_SHIFT 5 +#define VC5_CLK_OUTPUT_CFG0_CFG_MASK GENMASK(7, VC5_CLK_OUTPUT_CFG0_CFG_SHIFT) + +#define VC5_CLK_OUTPUT_CFG0_CFG_LVPECL (VC5_LVPECL) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS (VC5_CMOS) +#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL33 (VC5_HCSL33) +#define VC5_CLK_OUTPUT_CFG0_CFG_LVDS (VC5_LVDS) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS2 (VC5_CMOS2) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOSD (VC5_CMOSD) +#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL25 (VC5_HCSL25) + +#define VC5_CLK_OUTPUT_CFG0_PWR_SHIFT 3 +#define VC5_CLK_OUTPUT_CFG0_PWR_MASK GENMASK(4, VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_18 (0<regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1), VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, VC5_CLK_OUTPUT_CFG1_EN_CLKBUF); + if (hwdata->clk_output_cfg0_mask) { + dev_dbg(&vc5->client->dev, "Update output %d mask 0x%0X val 0x%0X\n", + hwdata->num, hwdata->clk_output_cfg0_mask, + hwdata->clk_output_cfg0); + + regmap_update_bits(vc5->regmap, + VC5_CLK_OUTPUT_CFG(hwdata->num, 0), + hwdata->clk_output_cfg0_mask, + hwdata->clk_output_cfg0); + } + return 0; } @@ -666,6 +703,120 @@ static int vc5_map_index_to_output(const enum vc5_model model, } } +static int vc5_update_mode(struct device_node *np_output, + struct vc5_hw_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, "idt,mode", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_CFG_MASK; + switch (value) { + case VC5_CLK_OUTPUT_CFG0_CFG_LVPECL: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOS: + case VC5_CLK_OUTPUT_CFG0_CFG_HCSL33: + case VC5_CLK_OUTPUT_CFG0_CFG_LVDS: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOS2: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOSD: + case VC5_CLK_OUTPUT_CFG0_CFG_HCSL25: + clk_out->clk_output_cfg0 |= + value << VC5_CLK_OUTPUT_CFG0_CFG_SHIFT; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_update_power(struct device_node *np_output, + struct vc5_hw_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, + "idt,voltage-microvolts", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK; + switch (value) { + case 1800000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_18; + break; + case 2500000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_25; + break; + case 3300000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_33; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_update_slew(struct device_node *np_output, + struct vc5_hw_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, "idt,slew-percent", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_SLEW_MASK; + switch (value) { + case 80: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_80; + break; + case 85: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_85; + break; + case 90: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_90; + break; + case 100: + clk_out->clk_output_cfg0 |= + VC5_CLK_OUTPUT_CFG0_SLEW_100; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_get_output_config(struct i2c_client *client, + struct vc5_hw_data *clk_out) +{ + struct device_node *np_output; + char *child_name; + int ret = 0; + + child_name = kasprintf(GFP_KERNEL, "OUT%d", clk_out->num + 1); + np_output = of_get_child_by_name(client->dev.of_node, child_name); + kfree(child_name); + if (!np_output) + goto output_done; + + ret = vc5_update_mode(np_output, clk_out); + if (ret) + goto output_error; + + ret = vc5_update_power(np_output, clk_out); + if (ret) + goto output_error; + + ret = vc5_update_slew(np_output, clk_out); + +output_error: + if (ret) { + dev_err(&client->dev, + "Invalid clock output configuration OUT%d\n", + clk_out->num + 1); + } + + of_node_put(np_output); + +output_done: + return ret; +} + static const struct of_device_id clk_vc5_of_match[]; static int vc5_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -863,6 +1014,11 @@ static int vc5_probe(struct i2c_client *client, const struct i2c_device_id *id) init.name); goto err_clk; } + + /* Fetch Clock Output configuration from DT (if specified) */ + ret = vc5_get_output_config(client, &vc5->clk_out[n]); + if (ret) + goto err_clk; } ret = of_clk_add_hw_provider(client->dev.of_node, vc5_of_clk_get, vc5); diff --git a/include/dt-bindings/clk/versaclock.h b/include/dt-bindings/clk/versaclock.h new file mode 100644 index 000000000000..c6a6a0946564 --- /dev/null +++ b/include/dt-bindings/clk/versaclock.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* This file defines field values used by the versaclock 6 family + * for defining output type + */ + +#define VC5_LVPECL 0 +#define VC5_CMOS 1 +#define VC5_HCSL33 2 +#define VC5_LVDS 3 +#define VC5_CMOS2 4 +#define VC5_CMOSD 5 +#define VC5_HCSL25 6