diff mbox series

[v4] dt-bindings: display: dw_mipi_dsi.txt: convert to yaml

Message ID 20200423100058.1734009-1-adrian.ratiu@collabora.com
State Not Applicable
Headers show
Series [v4] dt-bindings: display: dw_mipi_dsi.txt: convert to yaml | expand

Checks

Context Check Description
robh/dt-meta-schema success

Commit Message

Adrian Ratiu April 23, 2020, 10 a.m. UTC
This converts the Synopsis MIPI DSI binding documentation to yaml and
should be quite straightforward. I've added a missing ref clk and also
added Philippe as maintainer b/c he's the original txt author following
the algorithm provided in Message-ID 20200420175909.GA5810@ravnborg.org.

Cc: Philippe CORNU <philippe.cornu@st.com>
Cc: devicetree@vger.kernel.org
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
---
Changes in v4:
  - Dropped panel patternProperties (Rob)

Changes in v3:
  - Added ports property and its children which are required (Laurent)
  - Sorted required list alphabetically

Changes in v2:
  - Removed unnecessary descriptions and maxItems (Rob)
  - Changed maintainers entry / dropped Mark (Rob)
  - Added dsi-controller.yaml ref (Rob)
---
 .../bindings/display/bridge/dw_mipi_dsi.txt   | 32 ---------
 .../display/bridge/snps,dw-mipi-dsi.yaml      | 68 +++++++++++++++++++
 2 files changed, 68 insertions(+), 32 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
 create mode 100644 Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml

Comments

Angelo Ribeiro April 23, 2020, 11:12 a.m. UTC | #1
Hi Adrian,

From: Adrian Ratiu <adrian.ratiu@collabora.com>
Date: Thu, Apr 23, 2020 at 11:00:58

> This converts the Synopsis MIPI DSI binding documentation to yaml and
> should be quite straightforward. I've added a missing ref clk and also
> added Philippe as maintainer b/c he's the original txt author following
> the algorithm provided in Message-ID 20200420175909.GA5810@ravnborg.org.
> 
> Cc: Philippe CORNU <philippe.cornu@st.com>
> Cc: devicetree@vger.kernel.org
> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
> ---
> Changes in v4:
>   - Dropped panel patternProperties (Rob)
> 
> Changes in v3:
>   - Added ports property and its children which are required (Laurent)
>   - Sorted required list alphabetically
> 
> Changes in v2:
>   - Removed unnecessary descriptions and maxItems (Rob)
>   - Changed maintainers entry / dropped Mark (Rob)
>   - Added dsi-controller.yaml ref (Rob)
> ---
>  .../bindings/display/bridge/dw_mipi_dsi.txt   | 32 ---------
>  .../display/bridge/snps,dw-mipi-dsi.yaml      | 68 +++++++++++++++++++
>  2 files changed, 68 insertions(+), 32 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> deleted file mode 100644
> index b13adf30b8d3b..0000000000000
> --- a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -Synopsys DesignWare MIPI DSI host controller
> -============================================
> -
> -This document defines device tree properties for the Synopsys DesignWare MIPI
> -DSI host controller. It doesn't constitue a device tree binding specification
> -by itself but is meant to be referenced by platform-specific device tree
> -bindings.
> -
> -When referenced from platform device tree bindings the properties defined in
> -this document are defined as follows. The platform device tree bindings are
> -responsible for defining whether each optional property is used or not.
> -
> -- reg: Memory mapped base address and length of the DesignWare MIPI DSI
> -  host controller registers. (mandatory)
> -
> -- clocks: References to all the clocks specified in the clock-names property
> -  as specified in [1]. (mandatory)
> -
> -- clock-names:
> -  - "pclk" is the peripheral clock for either AHB and APB. (mandatory)
> -  - "px_clk" is the pixel clock for the DPI/RGB input. (optional)
> -
> -- resets: References to all the resets specified in the reset-names property
> -  as specified in [2]. (optional)
> -
> -- reset-names: string reset name, must be "apb" if used. (optional)
> -
> -- panel or bridge node: see [3]. (mandatory)
> -
> -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -[2] Documentation/devicetree/bindings/reset/reset.txt
> -[3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
> diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> new file mode 100644
> index 0000000000000..012aa8e7cb8cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml*__;Iw!!A4F2R9G_pg!Pn0TP0h4QkEcILgH_xBqMjSM4dJxlyU3iCvF4FSbmdQOSIV309ngWu8EKCpP901d$ 
> +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!A4F2R9G_pg!Pn0TP0h4QkEcILgH_xBqMjSM4dJxlyU3iCvF4FSbmdQOSIV309ngWu8EKPfhyNgW$ 
> +
> +title: Synopsys DesignWare MIPI DSI host controller
> +
> +maintainers:
> +  - Philippe CORNU <philippe.cornu@st.com>
> +
> +description: |
> +  This document defines device tree properties for the Synopsys DesignWare MIPI
> +  DSI host controller. It doesn't constitue a device tree binding specification
> +  by itself but is meant to be referenced by platform-specific device tree
> +  bindings.
> +
> +  When referenced from platform device tree bindings the properties defined in
> +  this document are defined as follows. The platform device tree bindings are
> +  responsible for defining whether each property is required or optional.
> +
> +allOf:
> +  - $ref: ../dsi-controller.yaml#
> +
> +properties:
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Module clock
> +      - description: DSI bus clock for either AHB and APB
> +      - description: Pixel clock for the DPI/RGB input
> +    minItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: ref
> +      - const: pclk
> +      - const: px_clk
> +    minItems: 2
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    const: apb
> +
> +  ports:
> +    type: object
> +
> +    properties:
> +      port@0:
> +        type: object
> +        description: Input node to receive pixel data.
> +      port@1:
> +        type: object
> +        description: DSI output node to panel.
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - clock-names
> +  - clocks
> +  - ports
> +  - reg

Shouldn't the reset and reset-names be stated as required?
From what I understand the driver will return if the reset is not 
available.

> -- 
> 2.26.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://urldefense.com/v3/__https://lists.freedesktop.org/mailman/listinfo/dri-devel__;!!A4F2R9G_pg!Pn0TP0h4QkEcILgH_xBqMjSM4dJxlyU3iCvF4FSbmdQOSIV309ngWu8EKDNeA2R5$ 

Thanks,
Angelo
Adrian Ratiu April 23, 2020, 11:52 a.m. UTC | #2
Hi Angelo,

On Thu, 23 Apr 2020, Angelo Ribeiro <Angelo.Ribeiro@synopsys.com> 
wrote:
> Hi Adrian, 
> 
> From: Adrian Ratiu <adrian.ratiu@collabora.com> Date: Thu, Apr 
> 23, 2020 at 11:00:58 
> 
>> This converts the Synopsis MIPI DSI binding documentation to 
>> yaml and should be quite straightforward. I've added a missing 
>> ref clk and also added Philippe as maintainer b/c he's the 
>> original txt author following the algorithm provided in 
>> Message-ID 20200420175909.GA5810@ravnborg.org.   Cc: Philippe 
>> CORNU <philippe.cornu@st.com> Cc: devicetree@vger.kernel.org 
>> Suggested-by: Laurent Pinchart 
>> <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring 
>> <robh@kernel.org> Signed-off-by: Adrian Ratiu 
>> <adrian.ratiu@collabora.com> --- Changes in v4: 
>>   - Dropped panel patternProperties (Rob) 
>>  Changes in v3: 
>>   - Added ports property and its children which are required 
>>   (Laurent) - Sorted required list alphabetically 
>>  Changes in v2: 
>>   - Removed unnecessary descriptions and maxItems (Rob) - 
>>   Changed maintainers entry / dropped Mark (Rob) - Added 
>>   dsi-controller.yaml ref (Rob) 
>> --- 
>>  .../bindings/display/bridge/dw_mipi_dsi.txt   | 32 --------- 
>>  .../display/bridge/snps,dw-mipi-dsi.yaml      | 68 
>>  +++++++++++++++++++ 2 files changed, 68 insertions(+), 32 
>>  deletions(-) delete mode 100644 
>>  Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt 
>>  create mode 100644 
>>  Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml 
>>  diff --git 
>> a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt 
>> b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt 
>> deleted file mode 100644 index b13adf30b8d3b..0000000000000 --- 
>> a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt 
>> +++ /dev/null @@ -1,32 +0,0 @@ -Synopsys DesignWare MIPI DSI 
>> host controller -============================================ - 
>> -This document defines device tree properties for the Synopsys 
>> DesignWare MIPI -DSI host controller. It doesn't constitue a 
>> device tree binding specification -by itself but is meant to be 
>> referenced by platform-specific device tree -bindings.  - -When 
>> referenced from platform device tree bindings the properties 
>> defined in -this document are defined as follows. The platform 
>> device tree bindings are -responsible for defining whether each 
>> optional property is used or not.  - -- reg: Memory mapped base 
>> address and length of the DesignWare MIPI DSI -  host 
>> controller registers. (mandatory) - -- clocks: References to 
>> all the clocks specified in the clock-names property -  as 
>> specified in [1]. (mandatory) - -- clock-names: -  - "pclk" is 
>> the peripheral clock for either AHB and APB. (mandatory) -  - 
>> "px_clk" is the pixel clock for the DPI/RGB input. (optional) - 
>> -- resets: References to all the resets specified in the 
>> reset-names property -  as specified in [2]. (optional) - -- 
>> reset-names: string reset name, must be "apb" if 
>> used. (optional) - -- panel or bridge node: see 
>> [3]. (mandatory) - -[1] 
>> Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] 
>> Documentation/devicetree/bindings/reset/reset.txt -[3] 
>> Documentation/devicetree/bindings/display/mipi-dsi-bus.txt diff 
>> --git 
>> a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml 
>> b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml 
>> new file mode 100644 index 0000000000000..012aa8e7cb8cd --- 
>> /dev/null +++ 
>> b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml 
>> @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR 
>> BSD-2-Clause) +%YAML 1.2 +--- +$id: 
>> https://urldefense.com/v3/__http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml*__;Iw!!A4F2R9G_pg!Pn0TP0h4QkEcILgH_xBqMjSM4dJxlyU3iCvF4FSbmdQOSIV309ngWu8EKCpP901d$ 
>> +$schema: 
>> https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!A4F2R9G_pg!Pn0TP0h4QkEcILgH_xBqMjSM4dJxlyU3iCvF4FSbmdQOSIV309ngWu8EKPfhyNgW$ 
>> + +title: Synopsys DesignWare MIPI DSI host controller + 
>> +maintainers: +  - Philippe CORNU <philippe.cornu@st.com> + 
>> +description: | +  This document defines device tree properties 
>> for the Synopsys DesignWare MIPI +  DSI host controller. It 
>> doesn't constitue a device tree binding specification +  by 
>> itself but is meant to be referenced by platform-specific 
>> device tree +  bindings.  + +  When referenced from platform 
>> device tree bindings the properties defined in +  this document 
>> are defined as follows. The platform device tree bindings are + 
>> responsible for defining whether each property is required or 
>> optional.  + +allOf: +  - $ref: ../dsi-controller.yaml# + 
>> +properties: +  reg: +    maxItems: 1 + +  clocks: +    items: 
>> +      - description: Module clock +      - description: DSI 
>> bus clock for either AHB and APB +      - description: Pixel 
>> clock for the DPI/RGB input +    minItems: 2 + +  clock-names: 
>> +    items: +      - const: ref +      - const: pclk +      - 
>> const: px_clk +    minItems: 2 + +  resets: +    maxItems: 1 + 
>> +  reset-names: +    const: apb + +  ports: +    type: object + 
>> +    properties: +      port@0: +        type: object + 
>> description: Input node to receive pixel data.  +      port@1: 
>> +        type: object +        description: DSI output node to 
>> panel.  + +    required: +      - port@0 +      - port@1 + 
>> +required: +  - clock-names +  - clocks +  - ports +  - reg 
> 
> Shouldn't the reset and reset-names be stated as required?  From 
> what I understand the driver will return if the reset is not 
> available. 
>

I think the answer is no and is confirmed by other driver bindings 
(eg. st,stm-32-dsi.yaml) which define the apb reset but don't 
strictly require it.

I also did some runtime testing on my imx6dl board and even though 
the code in the dw_mipi_dsi.c bridge probe() is a bit confusing it 
doesn't strictly require the reset because IS_ERR(apb_rst) is 
FALSE when apb_rst is NULL, so everything works as expected 
without errors.

>> -- 
>> 2.26.0
>> 
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://urldefense.com/v3/__https://lists.freedesktop.org/mailman/listinfo/dri-devel__;!!A4F2R9G_pg!Pn0TP0h4QkEcILgH_xBqMjSM4dJxlyU3iCvF4FSbmdQOSIV309ngWu8EKDNeA2R5$ 
>
> Thanks,
> Angelo
Sam Ravnborg May 4, 2020, 7:56 p.m. UTC | #3
On Thu, Apr 23, 2020 at 01:00:58PM +0300, Adrian Ratiu wrote:
> This converts the Synopsis MIPI DSI binding documentation to yaml and
> should be quite straightforward. I've added a missing ref clk and also
> added Philippe as maintainer b/c he's the original txt author following
> the algorithm provided in Message-ID 20200420175909.GA5810@ravnborg.org.
> 
> Cc: Philippe CORNU <philippe.cornu@st.com>
> Cc: devicetree@vger.kernel.org
> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Applied to drm-misc-next.

	Sam


> ---
> Changes in v4:
>   - Dropped panel patternProperties (Rob)
> 
> Changes in v3:
>   - Added ports property and its children which are required (Laurent)
>   - Sorted required list alphabetically
> 
> Changes in v2:
>   - Removed unnecessary descriptions and maxItems (Rob)
>   - Changed maintainers entry / dropped Mark (Rob)
>   - Added dsi-controller.yaml ref (Rob)
> ---
>  .../bindings/display/bridge/dw_mipi_dsi.txt   | 32 ---------
>  .../display/bridge/snps,dw-mipi-dsi.yaml      | 68 +++++++++++++++++++
>  2 files changed, 68 insertions(+), 32 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> deleted file mode 100644
> index b13adf30b8d3b..0000000000000
> --- a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -Synopsys DesignWare MIPI DSI host controller
> -============================================
> -
> -This document defines device tree properties for the Synopsys DesignWare MIPI
> -DSI host controller. It doesn't constitue a device tree binding specification
> -by itself but is meant to be referenced by platform-specific device tree
> -bindings.
> -
> -When referenced from platform device tree bindings the properties defined in
> -this document are defined as follows. The platform device tree bindings are
> -responsible for defining whether each optional property is used or not.
> -
> -- reg: Memory mapped base address and length of the DesignWare MIPI DSI
> -  host controller registers. (mandatory)
> -
> -- clocks: References to all the clocks specified in the clock-names property
> -  as specified in [1]. (mandatory)
> -
> -- clock-names:
> -  - "pclk" is the peripheral clock for either AHB and APB. (mandatory)
> -  - "px_clk" is the pixel clock for the DPI/RGB input. (optional)
> -
> -- resets: References to all the resets specified in the reset-names property
> -  as specified in [2]. (optional)
> -
> -- reset-names: string reset name, must be "apb" if used. (optional)
> -
> -- panel or bridge node: see [3]. (mandatory)
> -
> -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -[2] Documentation/devicetree/bindings/reset/reset.txt
> -[3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
> diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> new file mode 100644
> index 0000000000000..012aa8e7cb8cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DesignWare MIPI DSI host controller
> +
> +maintainers:
> +  - Philippe CORNU <philippe.cornu@st.com>
> +
> +description: |
> +  This document defines device tree properties for the Synopsys DesignWare MIPI
> +  DSI host controller. It doesn't constitue a device tree binding specification
> +  by itself but is meant to be referenced by platform-specific device tree
> +  bindings.
> +
> +  When referenced from platform device tree bindings the properties defined in
> +  this document are defined as follows. The platform device tree bindings are
> +  responsible for defining whether each property is required or optional.
> +
> +allOf:
> +  - $ref: ../dsi-controller.yaml#
> +
> +properties:
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Module clock
> +      - description: DSI bus clock for either AHB and APB
> +      - description: Pixel clock for the DPI/RGB input
> +    minItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: ref
> +      - const: pclk
> +      - const: px_clk
> +    minItems: 2
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    const: apb
> +
> +  ports:
> +    type: object
> +
> +    properties:
> +      port@0:
> +        type: object
> +        description: Input node to receive pixel data.
> +      port@1:
> +        type: object
> +        description: DSI output node to panel.
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - clock-names
> +  - clocks
> +  - ports
> +  - reg
> -- 
> 2.26.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
deleted file mode 100644
index b13adf30b8d3b..0000000000000
--- a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
+++ /dev/null
@@ -1,32 +0,0 @@ 
-Synopsys DesignWare MIPI DSI host controller
-============================================
-
-This document defines device tree properties for the Synopsys DesignWare MIPI
-DSI host controller. It doesn't constitue a device tree binding specification
-by itself but is meant to be referenced by platform-specific device tree
-bindings.
-
-When referenced from platform device tree bindings the properties defined in
-this document are defined as follows. The platform device tree bindings are
-responsible for defining whether each optional property is used or not.
-
-- reg: Memory mapped base address and length of the DesignWare MIPI DSI
-  host controller registers. (mandatory)
-
-- clocks: References to all the clocks specified in the clock-names property
-  as specified in [1]. (mandatory)
-
-- clock-names:
-  - "pclk" is the peripheral clock for either AHB and APB. (mandatory)
-  - "px_clk" is the pixel clock for the DPI/RGB input. (optional)
-
-- resets: References to all the resets specified in the reset-names property
-  as specified in [2]. (optional)
-
-- reset-names: string reset name, must be "apb" if used. (optional)
-
-- panel or bridge node: see [3]. (mandatory)
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/reset/reset.txt
-[3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
new file mode 100644
index 0000000000000..012aa8e7cb8cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
@@ -0,0 +1,68 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare MIPI DSI host controller
+
+maintainers:
+  - Philippe CORNU <philippe.cornu@st.com>
+
+description: |
+  This document defines device tree properties for the Synopsys DesignWare MIPI
+  DSI host controller. It doesn't constitue a device tree binding specification
+  by itself but is meant to be referenced by platform-specific device tree
+  bindings.
+
+  When referenced from platform device tree bindings the properties defined in
+  this document are defined as follows. The platform device tree bindings are
+  responsible for defining whether each property is required or optional.
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Module clock
+      - description: DSI bus clock for either AHB and APB
+      - description: Pixel clock for the DPI/RGB input
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: ref
+      - const: pclk
+      - const: px_clk
+    minItems: 2
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: apb
+
+  ports:
+    type: object
+
+    properties:
+      port@0:
+        type: object
+        description: Input node to receive pixel data.
+      port@1:
+        type: object
+        description: DSI output node to panel.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - clock-names
+  - clocks
+  - ports
+  - reg