[V3,2/3] dt-bindings: Add Logic PD Type 28 display panel

This patch adds documentation of device tree bindings for the WVGA panel
Logic PD Type 28 display.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V3:  Correct build errors from 'make dt_binding_check'
V2:  Use YAML instead of TXT for binding

On Wed, Sep 25, 2019 at 01:42:37PM -0500, Adam Ford wrote:
> This patch adds documentation of device tree bindings for the WVGA panel
> Logic PD Type 28 display.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> ---
> V3:  Correct build errors from 'make dt_binding_check'
> V2:  Use YAML instead of TXT for binding
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> new file mode 100644
> index 000000000000..74ba650ea7a0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> @@ -0,0 +1,31 @@
> +# SPDX-License-Identifier: (GPL-2.0+ OR X11)

(GPL-2.0-only OR BSD-2-Clause) please.

X11 is pretty much never right unless this is copyright X Consortium.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
> +
> +maintainers:
> +  - Adam Ford <aford173@gmail.com>
> +

You need:

allOf:
  - $ref: panel-common.yaml#

> +properties:
> +  compatible:
> +    const: logicpd,type28
> +

> +  power-supply:
> +    description: Regulator to provide the supply voltage
> +    maxItems: 1
> +
> +  enable-gpios:
> +    description: GPIO pin to enable or disable the panel
> +    maxItems: 1
> +
> +  backlight:
> +    description: Backlight used by the panel
> +    $ref: "/schemas/types.yaml#/definitions/phandle"

These 3 are all defined in the common schema, so you just need 'true' 
for the value to indicate they apply to this panel and to make 
'additionalProperties: false' happy.

> +
> +required:
> +  - compatible

Are the rest really optional? 

> +
> +additionalProperties: false
> -- 
> 2.17.1
>

On Fri, Sep 27, 2019 at 1:51 PM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Sep 25, 2019 at 01:42:37PM -0500, Adam Ford wrote:
> > This patch adds documentation of device tree bindings for the WVGA panel
> > Logic PD Type 28 display.
> >
> > Signed-off-by: Adam Ford <aford173@gmail.com>
> > ---
> > V3:  Correct build errors from 'make dt_binding_check'
> > V2:  Use YAML instead of TXT for binding
> >
> > diff --git a/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> > new file mode 100644
> > index 000000000000..74ba650ea7a0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> > @@ -0,0 +1,31 @@
> > +# SPDX-License-Identifier: (GPL-2.0+ OR X11)
>
> (GPL-2.0-only OR BSD-2-Clause) please.
>
> X11 is pretty much never right unless this is copyright X Consortium.
>

I copied the example from
Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml

Is there a better example I can use?  If what I did is wrong, then it
seems like that board is wrong too.

> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
> > +
> > +maintainers:
> > +  - Adam Ford <aford173@gmail.com>
> > +
>
> You need:
>
> allOf:
>   - $ref: panel-common.yaml#
>
> > +properties:
> > +  compatible:
> > +    const: logicpd,type28
> > +
>
> > +  power-supply:
> > +    description: Regulator to provide the supply voltage
> > +    maxItems: 1
> > +
> > +  enable-gpios:
> > +    description: GPIO pin to enable or disable the panel
> > +    maxItems: 1
> > +
> > +  backlight:
> > +    description: Backlight used by the panel
> > +    $ref: "/schemas/types.yaml#/definitions/phandle"
>
> These 3 are all defined in the common schema, so you just need 'true'
> for the value to indicate they apply to this panel and to make
> 'additionalProperties: false' happy.

Sorry for my ignorance, but I am not familiar with the syntax here,
nor do I understand what is required.  Since there aren't many display
panels with yaml docs, I don't know what is expected and clearly the
one I used as a template didn't do it right either.

Is there a branch  where this stuff is located? I am just using the
latest linux-stable branch.

>
> > +
> > +required:
> > +  - compatible
>
> Are the rest really optional?

From what I can tell, they are optional.  I am just adding some timing
info to an already existing driver.  It's not my driver.


>
> > +
> > +additionalProperties: false
> > --
> > 2.17.1
> >