| Message ID | 20190508030927.16668-1-peng.fan@nxp.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [V2,1/4] dt-bindings: fsl: scu: add ocotp binding | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | "total: 0 errors, 1 warnings, 34 lines checked" |
> From: Peng Fan > Sent: Wednesday, May 8, 2019 10:56 AM > > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system > controller(SCU), the ocotp controller is being controlled by the SCU, so Linux > need use RPC to SCU for ocotp handling. This patch adds binding doc for i.MX8 > SCU OCOTP driver. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Aisheng Dong <aisheng.dong@nxp.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Anson Huang <anson.huang@nxp.com> > Cc: devicetree@vger.kernel.org > Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Dong Aisheng
> From: Peng Fan > Sent: Wednesday, May 8, 2019 10:56 AM > > This patch adds i.MX8 nvmem ocotp driver to access fuse via RPC to i.MX8 > system controller. > > Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: NXP Linux Team <linux-imx@nxp.com> > Cc: linux-arm-kernel@lists.infradead.org > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > > V2: > Add "scu" or "SCU", Add imx_sc_misc_otp_fuse_read, minor fixes > > drivers/nvmem/Kconfig | 7 ++ > drivers/nvmem/Makefile | 2 + > drivers/nvmem/imx-ocotp-scu.c | 170 > ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 179 insertions(+) > create mode 100644 drivers/nvmem/imx-ocotp-scu.c > > diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index > 530d570724c9..79afe44195a1 100644 > --- a/drivers/nvmem/Kconfig > +++ b/drivers/nvmem/Kconfig > @@ -36,6 +36,13 @@ config NVMEM_IMX_OCOTP > This driver can also be built as a module. If so, the module > will be called nvmem-imx-ocotp. > > +config NVMEM_IMX_OCOTP_SCU > + tristate "i.MX8 SCU On-Chip OTP Controller support" > + depends on IMX_SCU > + help > + This is a driver for the SCU On-Chip OTP Controller (OCOTP) > + available on i.MX8 SoCs. > + > config NVMEM_LPC18XX_EEPROM > tristate "NXP LPC18XX EEPROM Memory Support" > depends on ARCH_LPC18XX || COMPILE_TEST diff --git > a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index > 2ece8ffffdda..30d653d34e57 100644 > --- a/drivers/nvmem/Makefile > +++ b/drivers/nvmem/Makefile > @@ -13,6 +13,8 @@ obj-$(CONFIG_NVMEM_IMX_IIM) += > nvmem-imx-iim.o > nvmem-imx-iim-y := imx-iim.o > obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o > nvmem-imx-ocotp-y := imx-ocotp.o > +obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o > +nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o > obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += > nvmem_lpc18xx_eeprom.o > nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o > obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o > diff --git a/drivers/nvmem/imx-ocotp-scu.c b/drivers/nvmem/imx-ocotp-scu.c > new file mode 100644 index 000000000000..038e744c8588 > --- /dev/null > +++ b/drivers/nvmem/imx-ocotp-scu.c > @@ -0,0 +1,170 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * i.MX8 OCOTP fusebox driver > + * > + * Copyright 2019 NXP > + * > + * Peng Fan <peng.fan@nxp.com> > + */ > + > +#include <linux/firmware/imx/sci.h> > +#include <linux/module.h> > +#include <linux/nvmem-provider.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > + > +enum ocotp_devtype { > + IMX8QXP, > +}; > + > +struct ocotp_devtype_data { > + int devtype; > + int nregs; > +}; > + > +struct ocotp_priv { > + struct device *dev; > + const struct ocotp_devtype_data *data; > + struct imx_sc_ipc *nvmem_ipc; > +}; > + > +struct imx_sc_msg_req_misc_fuse_read { > + struct imx_sc_rpc_msg hdr; > + u32 word; > +} __packed; > + > +struct imx_sc_msg_resp_misc_fuse_read { > + struct imx_sc_rpc_msg hdr; > + u32 val; > +} __packed; > + How about struct imx_sc_msg_misc_fuse_read { struct imx_sc_rpc_msg hdr; union { u32 word; u32 val; } data; } __packed; Then we can save one struct and convert. > +static struct ocotp_devtype_data imx8qxp_data = { > + .devtype = IMX8QXP, > + .nregs = 800, > +}; > + > +static int imx_sc_misc_otp_fuse_read(struct imx_sc_ipc *ipc, u32 word, > + u32 *val) > +{ > + struct imx_sc_msg_req_misc_fuse_read msg; > + struct imx_sc_msg_resp_misc_fuse_read *resp; > + struct imx_sc_rpc_msg *hdr = &msg.hdr; > + int ret; > + > + hdr->ver = IMX_SC_RPC_VERSION; > + hdr->svc = (uint8_t)IMX_SC_RPC_SVC_MISC; > + hdr->func = (uint8_t)IMX_SC_MISC_FUNC_OTP_FUSE_READ; Pls drop the unnecessary type conversion. > + hdr->size = 2; > + > + msg.word = word; > + > + ret = imx_scu_call_rpc(ipc, &msg, true); > + if (ret) > + return ret; > + > + resp = (struct imx_sc_msg_resp_misc_fuse_read *)&msg; > + if (val != NULL) Drop this unnecessary check > + *val = resp->val; > + > + return 0; > +} > + > +static int imx_scu_ocotp_read(void *context, unsigned int offset, > + void *val, size_t bytes) > +{ > + struct ocotp_priv *priv = context; > + u32 count, index, num_bytes; > + u32 *buf; > + void *p; > + int i, ret; > + > + index = offset >> 2; > + num_bytes = round_up((offset % 4) + bytes, 4); > + count = num_bytes >> 2; > + > + if (count > (priv->data->nregs - index)) > + count = priv->data->nregs - index; > + > + p = kzalloc(num_bytes, GFP_KERNEL); > + if (!p) > + return -ENOMEM; > + > + buf = p; > + > + for (i = index; i < (index + count); i++) { > + if (priv->data->devtype == IMX8QXP) { > + if ((i > 271) && (i < 544)) { > + *(u32 *)buf = 0; Still need convert? > + buf += 4; I'm not sure this is right Shouldn't it be buf++ ? > + continue; > + } > + } > + > + ret = imx_sc_misc_otp_fuse_read(priv->nvmem_ipc, i, buf); > + if (ret) { > + kfree(p); > + return ret; > + } > + buf++; > + } > + > + memcpy(val, p + offset % 4, bytes); Is there a build warning? I wonder a more safe way maybe: memcpy(val, (u8 *)p + offset % 4, byptes); Regards Dong Aisheng > + > + kfree(p); > + > + return 0; > +} > + > +static struct nvmem_config imx_scu_ocotp_nvmem_config = { > + .name = "imx-scu-ocotp", > + .read_only = true, > + .word_size = 4, > + .stride = 1, > + .owner = THIS_MODULE, > + .reg_read = imx_scu_ocotp_read, > +}; > + > +static const struct of_device_id imx_scu_ocotp_dt_ids[] = { > + { .compatible = "fsl,imx8qxp-scu-ocotp", (void *)&imx8qxp_data }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, imx_scu_ocotp_dt_ids); > + > +static int imx_scu_ocotp_probe(struct platform_device *pdev) { > + struct device *dev = &pdev->dev; > + struct ocotp_priv *priv; > + struct nvmem_device *nvmem; > + int ret; > + > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + ret = imx_scu_get_handle(&priv->nvmem_ipc); > + if (ret) > + return ret; > + > + priv->data = of_device_get_match_data(dev); > + priv->dev = dev; > + imx_scu_ocotp_nvmem_config.size = 4 * priv->data->nregs; > + imx_scu_ocotp_nvmem_config.dev = dev; > + imx_scu_ocotp_nvmem_config.priv = priv; > + nvmem = devm_nvmem_register(dev, &imx_scu_ocotp_nvmem_config); > + > + return PTR_ERR_OR_ZERO(nvmem); > +} > + > +static struct platform_driver imx_scu_ocotp_driver = { > + .probe = imx_scu_ocotp_probe, > + .driver = { > + .name = "imx_scu_ocotp", > + .of_match_table = imx_scu_ocotp_dt_ids, > + }, > +}; > +module_platform_driver(imx_scu_ocotp_driver); > + > +MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>"); > +MODULE_DESCRIPTION("i.MX8 SCU OCOTP fuse box driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.16.4
> From: Peng Fan > Sent: Wednesday, May 8, 2019 10:56 AM > > Add i.MX8QXP ocotp node > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: NXP Linux Team <linux-imx@nxp.com> > Cc: Aisheng Dong <aisheng.dong@nxp.com> > Cc: Anson Huang <anson.huang@nxp.com> > Cc: Daniel Baluta <daniel.baluta@nxp.com> > Cc: devicetree@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Regards Dong Aisheng
Hi Aisheng, > Subject: RE: [PATCH V2 2/4] nvmem: imx: add i.MX8 nvmem driver > > > From: Peng Fan > > Sent: Wednesday, May 8, 2019 10:56 AM > > > > This patch adds i.MX8 nvmem ocotp driver to access fuse via RPC to > > i.MX8 system controller. > > > > Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > > Cc: Shawn Guo <shawnguo@kernel.org> > > Cc: Sascha Hauer <s.hauer@pengutronix.de> > > Cc: Pengutronix Kernel Team <kernel@pengutronix.de> > > Cc: Fabio Estevam <festevam@gmail.com> > > Cc: NXP Linux Team <linux-imx@nxp.com> > > Cc: linux-arm-kernel@lists.infradead.org > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > > --- > > > > V2: > > Add "scu" or "SCU", Add imx_sc_misc_otp_fuse_read, minor fixes > > > > drivers/nvmem/Kconfig | 7 ++ > > drivers/nvmem/Makefile | 2 + > > drivers/nvmem/imx-ocotp-scu.c | 170 > > ++++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 179 insertions(+) > > create mode 100644 drivers/nvmem/imx-ocotp-scu.c > > > > diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index > > 530d570724c9..79afe44195a1 100644 > > --- a/drivers/nvmem/Kconfig > > +++ b/drivers/nvmem/Kconfig > > @@ -36,6 +36,13 @@ config NVMEM_IMX_OCOTP > > This driver can also be built as a module. If so, the module > > will be called nvmem-imx-ocotp. > > > > +config NVMEM_IMX_OCOTP_SCU > > + tristate "i.MX8 SCU On-Chip OTP Controller support" > > + depends on IMX_SCU > > + help > > + This is a driver for the SCU On-Chip OTP Controller (OCOTP) > > + available on i.MX8 SoCs. > > + > > config NVMEM_LPC18XX_EEPROM > > tristate "NXP LPC18XX EEPROM Memory Support" > > depends on ARCH_LPC18XX || COMPILE_TEST diff --git > > a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index > > 2ece8ffffdda..30d653d34e57 100644 > > --- a/drivers/nvmem/Makefile > > +++ b/drivers/nvmem/Makefile > > @@ -13,6 +13,8 @@ obj-$(CONFIG_NVMEM_IMX_IIM) += > > nvmem-imx-iim.o > > nvmem-imx-iim-y := imx-iim.o > > obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o > > nvmem-imx-ocotp-y := imx-ocotp.o > > +obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o > > +nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o > > obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += > > nvmem_lpc18xx_eeprom.o > > nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o > > obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o > > diff --git a/drivers/nvmem/imx-ocotp-scu.c > > b/drivers/nvmem/imx-ocotp-scu.c new file mode 100644 index > > 000000000000..038e744c8588 > > --- /dev/null > > +++ b/drivers/nvmem/imx-ocotp-scu.c > > @@ -0,0 +1,170 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * i.MX8 OCOTP fusebox driver > > + * > > + * Copyright 2019 NXP > > + * > > + * Peng Fan <peng.fan@nxp.com> > > + */ > > + > > +#include <linux/firmware/imx/sci.h> > > +#include <linux/module.h> > > +#include <linux/nvmem-provider.h> > > +#include <linux/of_device.h> > > +#include <linux/platform_device.h> > > +#include <linux/slab.h> > > + > > +enum ocotp_devtype { > > + IMX8QXP, > > +}; > > + > > +struct ocotp_devtype_data { > > + int devtype; > > + int nregs; > > +}; > > + > > +struct ocotp_priv { > > + struct device *dev; > > + const struct ocotp_devtype_data *data; > > + struct imx_sc_ipc *nvmem_ipc; > > +}; > > + > > +struct imx_sc_msg_req_misc_fuse_read { > > + struct imx_sc_rpc_msg hdr; > > + u32 word; > > +} __packed; > > + > > +struct imx_sc_msg_resp_misc_fuse_read { > > + struct imx_sc_rpc_msg hdr; > > + u32 val; > > +} __packed; > > + > > How about > struct imx_sc_msg_misc_fuse_read { > struct imx_sc_rpc_msg hdr; > union { > u32 word; > u32 val; > } data; > } __packed; Then no need union, just "word" is ok here. Fix in V3. > > Then we can save one struct and convert. > > > +static struct ocotp_devtype_data imx8qxp_data = { > > + .devtype = IMX8QXP, > > + .nregs = 800, > > +}; > > + > > +static int imx_sc_misc_otp_fuse_read(struct imx_sc_ipc *ipc, u32 word, > > + u32 *val) > > +{ > > + struct imx_sc_msg_req_misc_fuse_read msg; > > + struct imx_sc_msg_resp_misc_fuse_read *resp; > > + struct imx_sc_rpc_msg *hdr = &msg.hdr; > > + int ret; > > + > > + hdr->ver = IMX_SC_RPC_VERSION; > > + hdr->svc = (uint8_t)IMX_SC_RPC_SVC_MISC; > > + hdr->func = (uint8_t)IMX_SC_MISC_FUNC_OTP_FUSE_READ; > > Pls drop the unnecessary type conversion. Ok. > > > + hdr->size = 2; > > + > > + msg.word = word; > > + > > + ret = imx_scu_call_rpc(ipc, &msg, true); > > + if (ret) > > + return ret; > > + > > + resp = (struct imx_sc_msg_resp_misc_fuse_read *)&msg; > > + if (val != NULL) > > Drop this unnecessary check ok. > > > + *val = resp->val; > > + > > + return 0; > > +} > > + > > +static int imx_scu_ocotp_read(void *context, unsigned int offset, > > + void *val, size_t bytes) > > +{ > > + struct ocotp_priv *priv = context; > > + u32 count, index, num_bytes; > > + u32 *buf; > > + void *p; > > + int i, ret; > > + > > + index = offset >> 2; > > + num_bytes = round_up((offset % 4) + bytes, 4); > > + count = num_bytes >> 2; > > + > > + if (count > (priv->data->nregs - index)) > > + count = priv->data->nregs - index; > > + > > + p = kzalloc(num_bytes, GFP_KERNEL); > > + if (!p) > > + return -ENOMEM; > > + > > + buf = p; > > + > > + for (i = index; i < (index + count); i++) { > > + if (priv->data->devtype == IMX8QXP) { > > + if ((i > 271) && (i < 544)) { > > + *(u32 *)buf = 0; > > Still need convert? Will drop the convert. > > > + buf += 4; > > I'm not sure this is right > Shouldn't it be buf++ ? You are right. Forget the fix the hole part. > > > + continue; > > + } > > + } > > + > > + ret = imx_sc_misc_otp_fuse_read(priv->nvmem_ipc, i, buf); > > + if (ret) { > > + kfree(p); > > + return ret; > > + } > > + buf++; > > + } > > + > > + memcpy(val, p + offset % 4, bytes); > > Is there a build warning? > I wonder a more safe way maybe: > memcpy(val, (u8 *)p + offset % 4, byptes); I did not meet issue. Fix in v3. Thanks, Peng. > > Regards > Dong Aisheng > > > + > > + kfree(p); > > + > > + return 0; > > +} > > + > > +static struct nvmem_config imx_scu_ocotp_nvmem_config = { > > + .name = "imx-scu-ocotp", > > + .read_only = true, > > + .word_size = 4, > > + .stride = 1, > > + .owner = THIS_MODULE, > > + .reg_read = imx_scu_ocotp_read, > > +}; > > + > > +static const struct of_device_id imx_scu_ocotp_dt_ids[] = { > > + { .compatible = "fsl,imx8qxp-scu-ocotp", (void *)&imx8qxp_data }, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(of, imx_scu_ocotp_dt_ids); > > + > > +static int imx_scu_ocotp_probe(struct platform_device *pdev) { > > + struct device *dev = &pdev->dev; > > + struct ocotp_priv *priv; > > + struct nvmem_device *nvmem; > > + int ret; > > + > > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > > + if (!priv) > > + return -ENOMEM; > > + > > + ret = imx_scu_get_handle(&priv->nvmem_ipc); > > + if (ret) > > + return ret; > > + > > + priv->data = of_device_get_match_data(dev); > > + priv->dev = dev; > > + imx_scu_ocotp_nvmem_config.size = 4 * priv->data->nregs; > > + imx_scu_ocotp_nvmem_config.dev = dev; > > + imx_scu_ocotp_nvmem_config.priv = priv; > > + nvmem = devm_nvmem_register(dev, &imx_scu_ocotp_nvmem_config); > > + > > + return PTR_ERR_OR_ZERO(nvmem); > > +} > > + > > +static struct platform_driver imx_scu_ocotp_driver = { > > + .probe = imx_scu_ocotp_probe, > > + .driver = { > > + .name = "imx_scu_ocotp", > > + .of_match_table = imx_scu_ocotp_dt_ids, > > + }, > > +}; > > +module_platform_driver(imx_scu_ocotp_driver); > > + > > +MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>"); > > +MODULE_DESCRIPTION("i.MX8 SCU OCOTP fuse box driver"); > > +MODULE_LICENSE("GPL v2"); > > -- > > 2.16.4
On Wed, 8 May 2019 02:56:02 +0000, Peng Fan wrote: > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as > system controller(SCU), the ocotp controller is being controlled > by the SCU, so Linux need use RPC to SCU for ocotp handling. This > patch adds binding doc for i.MX8 SCU OCOTP driver. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Aisheng Dong <aisheng.dong@nxp.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Anson Huang <anson.huang@nxp.com> > Cc: devicetree@vger.kernel.org > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > > V2: > Move OCOTP to end, add example, add "scu" > > .../devicetree/bindings/arm/freescale/fsl,scu.txt | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index 5d7dbabbb784..f378922906f6 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -133,6 +133,18 @@ RTC bindings based on SCU Message Protocol Required properties: - compatible: should be "fsl,imx8qxp-sc-rtc"; +OCOTP bindings based on SCU Message Protocol +------------------------------------------------------------ +Required properties: +- compatible: Should be "fsl,imx8qxp-scu-ocotp" +- #address-cells: Must be 1. Contains byte index +- #size-cells: Must be 1. Contains byte length + +Optional Child nodes: + +- Data cells of ocotp: + Detailed bindings are described in bindings/nvmem/nvmem.txt + Example (imx8qxp): ------------- aliases { @@ -177,6 +189,16 @@ firmware { ... }; + ocotp: imx8qx-ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 8>; + }; + }; + pd: imx8qx-pd { compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>;
NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system controller(SCU), the ocotp controller is being controlled by the SCU, so Linux need use RPC to SCU for ocotp handling. This patch adds binding doc for i.MX8 SCU OCOTP driver. Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Aisheng Dong <aisheng.dong@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Anson Huang <anson.huang@nxp.com> Cc: devicetree@vger.kernel.org Signed-off-by: Peng Fan <peng.fan@nxp.com> --- V2: Move OCOTP to end, add example, add "scu" .../devicetree/bindings/arm/freescale/fsl,scu.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)