| Message ID | 20180706053552.11438-3-daniel@zonque.org |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add devicetree functionality to w1 busses and ds2760 | expand |
On Fri, Jul 06, 2018 at 07:35:49AM +0200, Daniel Mack wrote: > This patch adds the devicetree bindings for Maxim's ds2760 battery > monitors. > > Signed-off-by: Daniel Mack <daniel@zonque.org> > --- > .../bindings/power/supply/maxim,ds2760.txt | 26 +++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt Reviewed-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt new file mode 100644 index 000000000000..55967a0bee11 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt @@ -0,0 +1,26 @@ +Devicetree bindings for Maxim DS2760 +==================================== + +The ds2760 is a w1 slave device and must hence have its sub-node in DT +under a w1 bus master node. + +The device exposes a power supply, so the details described in +Documentation/devicetree/bindings/power/supply/power_supply.txt apply. + +Required properties: +- compatible: must be "maxim,ds2760" + +Optional properties: +- power-supplies: Refers to one or more power supplies connected to + this battery. +- maxim,pmod-enabled: This boolean property enables the DS2760 to enter + sleep mode when the DQ line goes low for greater + than 2 seconds and leave sleep Mode when the DQ + line goes high. +- maxim,cache-time-ms: Time im milliseconds to cache the data for. When + this time expires, the values are read again from + the hardware. Defaults to 1000. +- rated-capacity-microamp-hours: + The rated capacity of the battery, in mAh. + If not specified, the value stored in the + non-volatile chip memory is used.
This patch adds the devicetree bindings for Maxim's ds2760 battery monitors. Signed-off-by: Daniel Mack <daniel@zonque.org> --- .../bindings/power/supply/maxim,ds2760.txt | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt