| Message ID | 20180424133425.24291-10-jagan@amarulasolutions.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | arm64: allwinner: Add A64 DE2 pipeline support | expand |
Hi, Dne torek, 24. april 2018 ob 15:34:21 CEST je Jagan Teki napisal(a): > HDMI on Allwinner A64 has similar behavior like H3/H5, so > reuse the same dts node details for A64. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 28 > +++++++++++++++++++++++++++ include/dt-bindings/clock/sun50i-a64-ccu.h | > 2 ++ > 2 files changed, 30 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index > b8734319dc77..aa73f1ce1ab2 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > @@ -705,6 +705,34 @@ > #interrupt-cells = <3>; > }; > > + hdmi: hdmi@1ee0000 { > + compatible = "allwinner,sun50i-a64-dw-hdmi", > + "allwinner,sun8i-a83t-dw-hdmi"; > + reg = <0x01ee0000 0x10000>; > + reg-io-width = <1>; > + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, > + <&ccu CLK_HDMI>; > + clock-names = "iahb", "isfr", "tmds"; > + resets = <&ccu RST_BUS_HDMI1>; > + reset-names = "ctrl"; > + phys = <&hdmi_phy>; > + phy-names = "hdmi-phy"; > + status = "disabled"; > + }; > + > + hdmi_phy: hdmi-phy@1ef0000 { > + compatible = "allwinner,sun50i-a64-hdmi-phy", > + "allwinner,sun8i-h3-hdmi-phy"; > + reg = <0x01ef0000 0x10000>; > + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, > + <&ccu CLK_PLL_VIDEO0>; > + clock-names = "bus", "mod", "pll-0"; Unfortunately, that won't work in all cases. HDMI has two possible clock parents and only one can be selected. If HDMI controller clock has PLL_VIDEO1 as a source, you will calculate wrong divider in HDMI PHY, since you will base calculations on PLL_VIDEO0. I think driver needs an expansion. That is also one of the reasons why I didn't yet send A64 HDMI patch series (I didn't figure out this part yet). The other reason is that I'm waiting on SRAM C claiming code. Best regards, Jernej > + resets = <&ccu RST_BUS_HDMI0>; > + reset-names = "phy"; > + #phy-cells = <0>; > + }; > + > rtc: rtc@1f00000 { > compatible = "allwinner,sun6i-a31-rtc"; > reg = <0x01f00000 0x54>; > diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h > b/include/dt-bindings/clock/sun50i-a64-ccu.h index > d66432c6e675..a054ff665d6e 100644 > --- a/include/dt-bindings/clock/sun50i-a64-ccu.h > +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h > @@ -43,6 +43,8 @@ > #ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_ > #define _DT_BINDINGS_CLK_SUN50I_A64_H_ > > +#define CLK_PLL_VIDEO0 7 > + > #define CLK_PLL_PERIPH0 11 > > #define CLK_BUS_MIPI_DSI 28 > -- > 2.14.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index b8734319dc77..aa73f1ce1ab2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -705,6 +705,34 @@ #interrupt-cells = <3>; }; + hdmi: hdmi@1ee0000 { + compatible = "allwinner,sun50i-a64-dw-hdmi", + "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + status = "disabled"; + }; + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun50i-a64-hdmi-phy", + "allwinner,sun8i-h3-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, + <&ccu CLK_PLL_VIDEO0>; + clock-names = "bus", "mod", "pll-0"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h index d66432c6e675..a054ff665d6e 100644 --- a/include/dt-bindings/clock/sun50i-a64-ccu.h +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h @@ -43,6 +43,8 @@ #ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_ #define _DT_BINDINGS_CLK_SUN50I_A64_H_ +#define CLK_PLL_VIDEO0 7 + #define CLK_PLL_PERIPH0 11 #define CLK_BUS_MIPI_DSI 28
HDMI on Allwinner A64 has similar behavior like H3/H5, so reuse the same dts node details for A64. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 28 +++++++++++++++++++++++++++ include/dt-bindings/clock/sun50i-a64-ccu.h | 2 ++ 2 files changed, 30 insertions(+)