diff mbox

[6/7] NFC: trf7970a: Enable pins are active high not active low

Message ID 20161220180608.29997-7-mgreer@animalcreek.com
State Superseded, archived
Headers show

Commit Message

Mark Greer Dec. 20, 2016, 6:06 p.m. UTC 
The example DTS code for the trf7970a sets the GPIOs for the EN
and EN2 pins to active low when they are really active high so
correct the error.

Signed-off-by: Mark Greer <mgreer@animalcreek.com>
---
 Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
index 32b35a07abe4..10672649a59e 100644
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -35,8 +35,8 @@  Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 		spi-max-frequency = <2000000>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <14 0>;
-		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>,
-				  <&gpio2 5 GPIO_ACTIVE_LOW>;
+		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
+				  <&gpio2 5 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&ldo3_reg>;
 		vin-voltage-override = <5000000>;
 		autosuspend-delay = <30000>;