diff mbox

[v3,1/2] drm/bridge: dumb-vga-dac: Support a VDD regulator supply

Message ID 20161029110611.28951-2-wens@csie.org
State Not Applicable, archived
Headers show

Commit Message

Chen-Yu Tsai Oct. 29, 2016, 11:06 a.m. UTC
Some dumb VGA DACs are active components which require external power.
Add support for specifying a regulator as its power supply.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 .../bindings/display/bridge/dumb-vga-dac.txt       |  2 ++
 drivers/gpu/drm/bridge/dumb-vga-dac.c              | 35 ++++++++++++++++++++++
 2 files changed, 37 insertions(+)

Comments

Rob Herring Oct. 31, 2016, 6:28 a.m. UTC | #1
On Sat, Oct 29, 2016 at 07:06:10PM +0800, Chen-Yu Tsai wrote:
> Some dumb VGA DACs are active components which require external power.
> Add support for specifying a regulator as its power supply.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  .../bindings/display/bridge/dumb-vga-dac.txt       |  2 ++

For the binding,

Acked-by: Rob Herring <robh@kernel.org>

One code comment below...

>  drivers/gpu/drm/bridge/dumb-vga-dac.c              | 35 ++++++++++++++++++++++
>  2 files changed, 37 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
> index 003bc246a270..164cbb15f04c 100644
> --- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
> @@ -16,6 +16,8 @@ graph bindings specified in Documentation/devicetree/bindings/graph.txt.
>  - Video port 0 for RGB input
>  - Video port 1 for VGA output
>  
> +Optional properties:
> +- vdd-supply: Power supply for DAC
>  
>  Example
>  -------
> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> index afec232185a7..59781e031220 100644
> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> @@ -12,6 +12,7 @@
>  
>  #include <linux/module.h>
>  #include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
>  
>  #include <drm/drmP.h>
>  #include <drm/drm_atomic_helper.h>
> @@ -23,6 +24,7 @@ struct dumb_vga {
>  	struct drm_connector	connector;
>  
>  	struct i2c_adapter	*ddc;
> +	struct regulator	*vdd;
>  };
>  
>  static inline struct dumb_vga *
> @@ -124,8 +126,33 @@ static int dumb_vga_attach(struct drm_bridge *bridge)
>  	return 0;
>  }
>  
> +static void dumb_vga_enable(struct drm_bridge *bridge)
> +{
> +	struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
> +	int ret;
> +
> +	if (!IS_ERR(vga->vdd)) {

if (IS_ERR())
	return;

...will save some intentation.

> +		ret = regulator_enable(vga->vdd);
> +
> +		if (ret) {
> +			DRM_ERROR("Failed to enable vdd regulator: %d\n", ret);
> +			return;
> +		}
> +	}
> +}
> +
> +static void dumb_vga_disable(struct drm_bridge *bridge)
> +{
> +	struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
> +
> +	if (!IS_ERR(vga->vdd))
> +		regulator_disable(vga->vdd);
> +}
> +
>  static const struct drm_bridge_funcs dumb_vga_bridge_funcs = {
>  	.attach		= dumb_vga_attach,
> +	.enable		= dumb_vga_enable,
> +	.disable	= dumb_vga_disable,
>  };
>  
>  static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev)
> @@ -169,6 +196,14 @@ static int dumb_vga_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  	platform_set_drvdata(pdev, vga);
>  
> +	vga->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
> +	if (IS_ERR(vga->vdd)) {
> +		ret = PTR_ERR(vga->vdd);
> +		if (ret == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret);
> +	}
> +
>  	vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev);
>  	if (IS_ERR(vga->ddc)) {
>  		if (PTR_ERR(vga->ddc) == -ENODEV) {
> -- 
> 2.9.3
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Chen-Yu Tsai Nov. 2, 2016, 1:33 a.m. UTC | #2
On Mon, Oct 31, 2016 at 2:28 PM, Rob Herring <robh@kernel.org> wrote:
> On Sat, Oct 29, 2016 at 07:06:10PM +0800, Chen-Yu Tsai wrote:
>> Some dumb VGA DACs are active components which require external power.
>> Add support for specifying a regulator as its power supply.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>>  .../bindings/display/bridge/dumb-vga-dac.txt       |  2 ++
>
> For the binding,
>
> Acked-by: Rob Herring <robh@kernel.org>
>
> One code comment below...
>
>>  drivers/gpu/drm/bridge/dumb-vga-dac.c              | 35 ++++++++++++++++++++++
>>  2 files changed, 37 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>> index 003bc246a270..164cbb15f04c 100644
>> --- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>> +++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>> @@ -16,6 +16,8 @@ graph bindings specified in Documentation/devicetree/bindings/graph.txt.
>>  - Video port 0 for RGB input
>>  - Video port 1 for VGA output
>>
>> +Optional properties:
>> +- vdd-supply: Power supply for DAC
>>
>>  Example
>>  -------
>> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
>> index afec232185a7..59781e031220 100644
>> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
>> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
>> @@ -12,6 +12,7 @@
>>
>>  #include <linux/module.h>
>>  #include <linux/of_graph.h>
>> +#include <linux/regulator/consumer.h>
>>
>>  #include <drm/drmP.h>
>>  #include <drm/drm_atomic_helper.h>
>> @@ -23,6 +24,7 @@ struct dumb_vga {
>>       struct drm_connector    connector;
>>
>>       struct i2c_adapter      *ddc;
>> +     struct regulator        *vdd;
>>  };
>>
>>  static inline struct dumb_vga *
>> @@ -124,8 +126,33 @@ static int dumb_vga_attach(struct drm_bridge *bridge)
>>       return 0;
>>  }
>>
>> +static void dumb_vga_enable(struct drm_bridge *bridge)
>> +{
>> +     struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
>> +     int ret;
>> +
>> +     if (!IS_ERR(vga->vdd)) {
>
> if (IS_ERR())
>         return;
>
> ...will save some intentation.

I thought about that, though if someone were to add more stuff to
this, such as an enable GPIO, they might have to rework it. A standalone
block of code would be easier to work with. I'm OK either way though.

ChenYu

>
>> +             ret = regulator_enable(vga->vdd);
>> +
>> +             if (ret) {
>> +                     DRM_ERROR("Failed to enable vdd regulator: %d\n", ret);
>> +                     return;
>> +             }
>> +     }
>> +}
>> +
>> +static void dumb_vga_disable(struct drm_bridge *bridge)
>> +{
>> +     struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
>> +
>> +     if (!IS_ERR(vga->vdd))
>> +             regulator_disable(vga->vdd);
>> +}
>> +
>>  static const struct drm_bridge_funcs dumb_vga_bridge_funcs = {
>>       .attach         = dumb_vga_attach,
>> +     .enable         = dumb_vga_enable,
>> +     .disable        = dumb_vga_disable,
>>  };
>>
>>  static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev)
>> @@ -169,6 +196,14 @@ static int dumb_vga_probe(struct platform_device *pdev)
>>               return -ENOMEM;
>>       platform_set_drvdata(pdev, vga);
>>
>> +     vga->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
>> +     if (IS_ERR(vga->vdd)) {
>> +             ret = PTR_ERR(vga->vdd);
>> +             if (ret == -EPROBE_DEFER)
>> +                     return -EPROBE_DEFER;
>> +             dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret);
>> +     }
>> +
>>       vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev);
>>       if (IS_ERR(vga->ddc)) {
>>               if (PTR_ERR(vga->ddc) == -ENODEV) {
>> --
>> 2.9.3
>>
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Chen-Yu Tsai Nov. 15, 2016, 2:59 a.m. UTC | #3
Hi,

On Wed, Nov 2, 2016 at 9:33 AM, Chen-Yu Tsai <wens@csie.org> wrote:
> On Mon, Oct 31, 2016 at 2:28 PM, Rob Herring <robh@kernel.org> wrote:
>> On Sat, Oct 29, 2016 at 07:06:10PM +0800, Chen-Yu Tsai wrote:
>>> Some dumb VGA DACs are active components which require external power.
>>> Add support for specifying a regulator as its power supply.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>> ---
>>>  .../bindings/display/bridge/dumb-vga-dac.txt       |  2 ++
>>
>> For the binding,
>>
>> Acked-by: Rob Herring <robh@kernel.org>

Any comments on this patch from the DRM people?

ChenYu

>>
>> One code comment below...
>>
>>>  drivers/gpu/drm/bridge/dumb-vga-dac.c              | 35 ++++++++++++++++++++++
>>>  2 files changed, 37 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>>> index 003bc246a270..164cbb15f04c 100644
>>> --- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>>> +++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>>> @@ -16,6 +16,8 @@ graph bindings specified in Documentation/devicetree/bindings/graph.txt.
>>>  - Video port 0 for RGB input
>>>  - Video port 1 for VGA output
>>>
>>> +Optional properties:
>>> +- vdd-supply: Power supply for DAC
>>>
>>>  Example
>>>  -------
>>> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
>>> index afec232185a7..59781e031220 100644
>>> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
>>> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
>>> @@ -12,6 +12,7 @@
>>>
>>>  #include <linux/module.h>
>>>  #include <linux/of_graph.h>
>>> +#include <linux/regulator/consumer.h>
>>>
>>>  #include <drm/drmP.h>
>>>  #include <drm/drm_atomic_helper.h>
>>> @@ -23,6 +24,7 @@ struct dumb_vga {
>>>       struct drm_connector    connector;
>>>
>>>       struct i2c_adapter      *ddc;
>>> +     struct regulator        *vdd;
>>>  };
>>>
>>>  static inline struct dumb_vga *
>>> @@ -124,8 +126,33 @@ static int dumb_vga_attach(struct drm_bridge *bridge)
>>>       return 0;
>>>  }
>>>
>>> +static void dumb_vga_enable(struct drm_bridge *bridge)
>>> +{
>>> +     struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
>>> +     int ret;
>>> +
>>> +     if (!IS_ERR(vga->vdd)) {
>>
>> if (IS_ERR())
>>         return;
>>
>> ...will save some intentation.
>
> I thought about that, though if someone were to add more stuff to
> this, such as an enable GPIO, they might have to rework it. A standalone
> block of code would be easier to work with. I'm OK either way though.
>
> ChenYu
>
>>
>>> +             ret = regulator_enable(vga->vdd);
>>> +
>>> +             if (ret) {
>>> +                     DRM_ERROR("Failed to enable vdd regulator: %d\n", ret);
>>> +                     return;
>>> +             }
>>> +     }
>>> +}
>>> +
>>> +static void dumb_vga_disable(struct drm_bridge *bridge)
>>> +{
>>> +     struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
>>> +
>>> +     if (!IS_ERR(vga->vdd))
>>> +             regulator_disable(vga->vdd);
>>> +}
>>> +
>>>  static const struct drm_bridge_funcs dumb_vga_bridge_funcs = {
>>>       .attach         = dumb_vga_attach,
>>> +     .enable         = dumb_vga_enable,
>>> +     .disable        = dumb_vga_disable,
>>>  };
>>>
>>>  static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev)
>>> @@ -169,6 +196,14 @@ static int dumb_vga_probe(struct platform_device *pdev)
>>>               return -ENOMEM;
>>>       platform_set_drvdata(pdev, vga);
>>>
>>> +     vga->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
>>> +     if (IS_ERR(vga->vdd)) {
>>> +             ret = PTR_ERR(vga->vdd);
>>> +             if (ret == -EPROBE_DEFER)
>>> +                     return -EPROBE_DEFER;
>>> +             dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret);
>>> +     }
>>> +
>>>       vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev);
>>>       if (IS_ERR(vga->ddc)) {
>>>               if (PTR_ERR(vga->ddc) == -ENODEV) {
>>> --
>>> 2.9.3
>>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Archit Taneja Nov. 16, 2016, 8:17 a.m. UTC | #4
Hi,

On 11/15/2016 08:29 AM, Chen-Yu Tsai wrote:
> Hi,
>
> On Wed, Nov 2, 2016 at 9:33 AM, Chen-Yu Tsai <wens@csie.org> wrote:
>> On Mon, Oct 31, 2016 at 2:28 PM, Rob Herring <robh@kernel.org> wrote:
>>> On Sat, Oct 29, 2016 at 07:06:10PM +0800, Chen-Yu Tsai wrote:
>>>> Some dumb VGA DACs are active components which require external power.
>>>> Add support for specifying a regulator as its power supply.
>>>>
>>>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>>>> ---
>>>>  .../bindings/display/bridge/dumb-vga-dac.txt       |  2 ++
>>>
>>> For the binding,
>>>
>>> Acked-by: Rob Herring <robh@kernel.org>
>
> Any comments on this patch from the DRM people?

A comment below.

>
> ChenYu
>
>>>
>>> One code comment below...
>>>
>>>>  drivers/gpu/drm/bridge/dumb-vga-dac.c              | 35 ++++++++++++++++++++++
>>>>  2 files changed, 37 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>>>> index 003bc246a270..164cbb15f04c 100644
>>>> --- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>>>> +++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
>>>> @@ -16,6 +16,8 @@ graph bindings specified in Documentation/devicetree/bindings/graph.txt.
>>>>  - Video port 0 for RGB input
>>>>  - Video port 1 for VGA output
>>>>
>>>> +Optional properties:
>>>> +- vdd-supply: Power supply for DAC
>>>>
>>>>  Example
>>>>  -------
>>>> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
>>>> index afec232185a7..59781e031220 100644
>>>> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
>>>> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
>>>> @@ -12,6 +12,7 @@
>>>>
>>>>  #include <linux/module.h>
>>>>  #include <linux/of_graph.h>
>>>> +#include <linux/regulator/consumer.h>
>>>>
>>>>  #include <drm/drmP.h>
>>>>  #include <drm/drm_atomic_helper.h>
>>>> @@ -23,6 +24,7 @@ struct dumb_vga {
>>>>       struct drm_connector    connector;
>>>>
>>>>       struct i2c_adapter      *ddc;
>>>> +     struct regulator        *vdd;
>>>>  };
>>>>
>>>>  static inline struct dumb_vga *
>>>> @@ -124,8 +126,33 @@ static int dumb_vga_attach(struct drm_bridge *bridge)
>>>>       return 0;
>>>>  }
>>>>
>>>> +static void dumb_vga_enable(struct drm_bridge *bridge)
>>>> +{
>>>> +     struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
>>>> +     int ret;
>>>> +
>>>> +     if (!IS_ERR(vga->vdd)) {
>>>
>>> if (IS_ERR())
>>>         return;
>>>
>>> ...will save some intentation.
>>
>> I thought about that, though if someone were to add more stuff to
>> this, such as an enable GPIO, they might have to rework it. A standalone
>> block of code would be easier to work with. I'm OK either way though.
>>
>> ChenYu
>>
>>>
>>>> +             ret = regulator_enable(vga->vdd);
>>>> +
>>>> +             if (ret) {
>>>> +                     DRM_ERROR("Failed to enable vdd regulator: %d\n", ret);
>>>> +                     return;
>>>> +             }
>>>> +     }
>>>> +}
>>>> +
>>>> +static void dumb_vga_disable(struct drm_bridge *bridge)
>>>> +{
>>>> +     struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
>>>> +
>>>> +     if (!IS_ERR(vga->vdd))
>>>> +             regulator_disable(vga->vdd);
>>>> +}
>>>> +
>>>>  static const struct drm_bridge_funcs dumb_vga_bridge_funcs = {
>>>>       .attach         = dumb_vga_attach,
>>>> +     .enable         = dumb_vga_enable,
>>>> +     .disable        = dumb_vga_disable,
>>>>  };
>>>>
>>>>  static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev)
>>>> @@ -169,6 +196,14 @@ static int dumb_vga_probe(struct platform_device *pdev)
>>>>               return -ENOMEM;
>>>>       platform_set_drvdata(pdev, vga);
>>>>
>>>> +     vga->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
>>>> +     if (IS_ERR(vga->vdd)) {
>>>> +             ret = PTR_ERR(vga->vdd);
>>>> +             if (ret == -EPROBE_DEFER)
>>>> +                     return -EPROBE_DEFER;
>>>> +             dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret);

A cleaner way would be to set vga->vdd to NULL here, and do:

	int ret = 0;

	if (vga->vdd)
		ret = regulator_enable(vga->vdd);

	if (ret) {
		...
		return;
	}

	/* if a gpio is added later */
	if (vga->gpio)
		ret = gpiod_set_value_cansleep(vga->gpio, 1);

	if (ret) {
		...
		return;
	}
	...

We don't really care what error code is contained in vga->vdd once we have
identified whether we got a regulator or not.

The same thing can be done for ddc too, but that can done left for later.

If you're okay with the suggestion, can you re-spin a patch?

Thanks,
Archit

>>>> +     }
>>>> +
>>>>       vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev);
>>>>       if (IS_ERR(vga->ddc)) {
>>>>               if (PTR_ERR(vga->ddc) == -ENODEV) {
>>>> --
>>>> 2.9.3
>>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
index 003bc246a270..164cbb15f04c 100644
--- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
+++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt
@@ -16,6 +16,8 @@  graph bindings specified in Documentation/devicetree/bindings/graph.txt.
 - Video port 0 for RGB input
 - Video port 1 for VGA output
 
+Optional properties:
+- vdd-supply: Power supply for DAC
 
 Example
 -------
diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
index afec232185a7..59781e031220 100644
--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -12,6 +12,7 @@ 
 
 #include <linux/module.h>
 #include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
 
 #include <drm/drmP.h>
 #include <drm/drm_atomic_helper.h>
@@ -23,6 +24,7 @@  struct dumb_vga {
 	struct drm_connector	connector;
 
 	struct i2c_adapter	*ddc;
+	struct regulator	*vdd;
 };
 
 static inline struct dumb_vga *
@@ -124,8 +126,33 @@  static int dumb_vga_attach(struct drm_bridge *bridge)
 	return 0;
 }
 
+static void dumb_vga_enable(struct drm_bridge *bridge)
+{
+	struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
+	int ret;
+
+	if (!IS_ERR(vga->vdd)) {
+		ret = regulator_enable(vga->vdd);
+
+		if (ret) {
+			DRM_ERROR("Failed to enable vdd regulator: %d\n", ret);
+			return;
+		}
+	}
+}
+
+static void dumb_vga_disable(struct drm_bridge *bridge)
+{
+	struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
+
+	if (!IS_ERR(vga->vdd))
+		regulator_disable(vga->vdd);
+}
+
 static const struct drm_bridge_funcs dumb_vga_bridge_funcs = {
 	.attach		= dumb_vga_attach,
+	.enable		= dumb_vga_enable,
+	.disable	= dumb_vga_disable,
 };
 
 static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev)
@@ -169,6 +196,14 @@  static int dumb_vga_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, vga);
 
+	vga->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
+	if (IS_ERR(vga->vdd)) {
+		ret = PTR_ERR(vga->vdd);
+		if (ret == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret);
+	}
+
 	vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev);
 	if (IS_ERR(vga->ddc)) {
 		if (PTR_ERR(vga->ddc) == -ENODEV) {