diff mbox

[alsa-devel,v4,2/2] mfd: arizona: Update DT binding to support INn_MODE init_data

Message ID 20140819201407.3447715e@songinha-Samsung-DeskTop-System
State Accepted, archived
Commit dc5193cc4a1e0103fe852acb21c588ea544697c6
Headers show

Commit Message

Inha Song Aug. 19, 2014, 11:14 a.m. UTC
This patch update DT binding to support INn_MODE init_data. Each
input signal path can be configurated either as a Analogue or
Digital using the INn_MODE registers.

Signed-off-by: Inha Song <ideal.song@samsung.com>
---
 Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Charles Keepax Aug. 19, 2014, 11:41 a.m. UTC | #1
On Tue, Aug 19, 2014 at 08:14:07PM +0900, Inha Song wrote:
> This patch update DT binding to support INn_MODE init_data. Each
> input signal path can be configurated either as a Analogue or
> Digital using the INn_MODE registers.
> 
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> ---

Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>

Thanks,
Charles
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 5c7e723..7bd1273 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -42,6 +42,13 @@  Optional properties:
     the chip default will be used.  If present exactly five values must
     be specified.
 
+  - wlf,inmode : A list of INn_MODE register values, where n is the number
+    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
+    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
+    If present, values must be specified less than or equal to the number of
+    input singals. If values less than the number of input signals, elements
+    that has not been specifed are set to 0 by default.
+
   - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
     they are being externally supplied. As covered in
     Documentation/devicetree/bindings/regulator/regulator.txt