From patchwork Thu Oct 21 12:01:22 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Geert Uytterhoeven X-Patchwork-Id: 1544328 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4HZmKm1KRfz9sRR for ; Thu, 21 Oct 2021 23:01:32 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230413AbhJUMDp (ORCPT ); Thu, 21 Oct 2021 08:03:45 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60758 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229765AbhJUMDp (ORCPT ); Thu, 21 Oct 2021 08:03:45 -0400 Received: from laurent.telenet-ops.be (laurent.telenet-ops.be [IPv6:2a02:1800:110:4::f00:19]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 05595C061749 for ; Thu, 21 Oct 2021 05:01:28 -0700 (PDT) Received: from ramsan.of.borg ([IPv6:2a02:1810:ac12:ed20:2c41:c2bf:5c8f:53c5]) by laurent.telenet-ops.be with bizsmtp id 8c1R260021Z5S4H01c1Rhs; Thu, 21 Oct 2021 14:01:25 +0200 Received: from rox.of.borg ([192.168.97.57]) by ramsan.of.borg with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.93) (envelope-from ) id 1mdWlA-006Y6m-Pe; Thu, 21 Oct 2021 14:01:24 +0200 Received: from geert by rox.of.borg with local (Exim 4.93) (envelope-from ) id 1mdWlA-00GCux-18; Thu, 21 Oct 2021 14:01:24 +0200 From: Geert Uytterhoeven To: Boris Brezillon , David Airlie , Daniel Vetter , Rob Herring Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Geert Uytterhoeven Subject: [PATCH] [RFC] dt-bindings: display: bridge: sil,sii9022: Convert to json-schema Date: Thu, 21 Oct 2021 14:01:22 +0200 Message-Id: <1ad70333148a473c1344a87993e795be90f355e4.1634817622.git.geert+renesas@glider.be> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Convert the Silicon Image sii902x HDMI bridge Device Tree binding documentation to json-schema. Add missing sil,sii9022-cpi and sil,sii9022-tpi compatible values. Signed-off-by: Geert Uytterhoeven --- RFC as I do not know the meaning of the various ports subnodes. --- .../bindings/display/bridge/sii902x.txt | 78 ---------- .../bindings/display/bridge/sil,sii9022.yaml | 133 ++++++++++++++++++ 2 files changed, 133 insertions(+), 78 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/bridge/sii902x.txt create mode 100644 Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt deleted file mode 100644 index 3bc760cc31cbbeee..0000000000000000 --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt +++ /dev/null @@ -1,78 +0,0 @@ -sii902x HDMI bridge bindings - -Required properties: - - compatible: "sil,sii9022" - - reg: i2c address of the bridge - -Optional properties: - - interrupts: describe the interrupt line used to inform the host - about hotplug events. - - reset-gpios: OF device-tree gpio specification for RST_N pin. - - iovcc-supply: I/O Supply Voltage (1.8V or 3.3V) - - cvcc12-supply: Digital Core Supply Voltage (1.2V) - - HDMI audio properties: - - #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin - is wired, <1> if the both are wired. HDMI audio is - configured only if this property is found. - - sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3 - Each integer indicates which i2s pin is connected to which - audio fifo. The first integer selects i2s audio pin for the - first audio fifo#0 (HDMI channels 1&2), second for fifo#1 - (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s - pins (SD0 - SD3). Any i2s pin can be connected to any fifo, - but there can be no gaps. E.g. an i2s pin must be mapped to - fifo#0 and fifo#1 before mapping a channel to fifo#2. Default - value is <0>, describing SD0 pin beiging routed to hdmi audio - fifo #0. - - clocks: phandle and clock specifier for each clock listed in - the clock-names property - - clock-names: "mclk" - Describes SII902x MCLK input. MCLK can be used to produce - HDMI audio CTS values. This property follows - Documentation/devicetree/bindings/clock/clock-bindings.txt - consumer binding. - - If HDMI audio is configured the sii902x device becomes an I2S - and/or spdif audio codec component (e.g a digital audio sink), - that can be used in configuring a full audio devices with - simple-card or audio-graph-card binding. See their binding - documents on how to describe the way the sii902x device is - connected to the rest of the audio system: - Documentation/devicetree/bindings/sound/simple-card.yaml - Documentation/devicetree/bindings/sound/audio-graph-card.yaml - Note: In case of the audio-graph-card binding the used port - index should be 3. - -Optional subnodes: - - video input: this subnode can contain a video input port node - to connect the bridge to a display controller output (See this - documentation [1]). - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - hdmi-bridge@39 { - compatible = "sil,sii9022"; - reg = <0x39>; - reset-gpios = <&pioA 1 0>; - iovcc-supply = <&v3v3_hdmi>; - cvcc12-supply = <&v1v2_hdmi>; - - #sound-dai-cells = <0>; - sil,i2s-data-lanes = < 0 1 2 >; - clocks = <&mclk>; - clock-names = "mclk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - bridge_in: endpoint { - remote-endpoint = <&dc_out>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml new file mode 100644 index 0000000000000000..4e5a8ecf87647e8b --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image sii902x HDMI bridge + +maintainers: + - Boris Brezillon + +properties: + compatible: + oneOf: + - items: + - enum: + - sil,sii9022-cpi + - sil,sii9022-tpi + - const: sil,sii9022 + - const: sil,sii9022 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: Interrupt line used to inform the host about hotplug events. + + reset-gpios: + maxItems: 1 + + iovcc-supply: + description: I/O Supply Voltage (1.8V or 3.3V) + + cvcc12-supply: + description: Digital Core Supply Voltage (1.2V) + + '#sound-dai-cells': + enum: [ 0, 1 ] + description: | + <0> if only i2s or spdif pin is wired, + <1> if both are wired. + HDMI audio is configured only if this property is found. + If HDMI audio is configured the sii902x device becomes an I2S and/or + spdif audio codec component (e.g. a digital audio sink), that can be used + in configuring a full audio devices with simple-card or audio-graph-card + binding. See their binding documents on how to describe the way the + sii902x device is connected to the rest of the audio system: + Documentation/devicetree/bindings/sound/simple-card.yaml + Documentation/devicetree/bindings/sound/audio-graph-card.yaml + Note: In case of the audio-graph-card binding the used port index should + be 3. + + sil,i2s-data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + items: + - enum: [ 0, 1, 2, 3 ] + - enum: [ 0, 1, 2, 3 ] + - enum: [ 0, 1, 2, 3 ] + - enum: [ 0, 1, 2, 3 ] + description: + Each integer indicates which i2s pin is connected to which audio fifo. + The first integer selects i2s audio pin for the first audio fifo#0 (HDMI + channels 1&2), second for fifo#1 (HDMI channels 3&4), and so on. There + are 4 fifos and 4 i2s pins (SD0 - SD3). Any i2s pin can be connected to + any fifo, but there can be no gaps. E.g. an i2s pin must be mapped to + fifo#0 and fifo#1 before mapping a channel to fifo#2. Default value is + <0>, describing SD0 pin being routed to hdmi audio fifo #0. + + clocks: + maxItems: 1 + description: MCLK input. MCLK can be used to produce HDMI audio CTS values. + + clock-names: + const: mclk + + ports: + type: object + properties: + port@0: + type: object + description: FIXME + + port@1: + type: object + description: FIXME + + port@2: + type: object + description: FIXME + + port@3: + type: object + description: FIXME + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + reset-gpios = <&pioA 1 0>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + + #sound-dai-cells = <0>; + sil,i2s-data-lanes = < 0 1 2 >; + clocks = <&mclk>; + clock-names = "mclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dc_out>; + }; + }; + }; + }; + };