new file mode 100644
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8q-hsio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8Q SoC series HSIO SERDES PHY
+
+maintainers:
+ - Richard Zhu <hongxing.zhu@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qxp-serdes
+ - fsl,imx8qm-serdes
+ reg:
+ minItems: 4
+ maxItems: 4
+
+ "#phy-cells":
+ const: 3
+ description: |
+ The first number defines the ID of the PHY contained in the HSIO macro.
+ The second defines controller ID binded to the PHY. The third defines the
+ HSIO configuratons refer to the different use cases. They are defined in
+ dt-bindings/phy/phy-imx8-pcie.h
+
+ reg-names:
+ items:
+ - const: reg
+ - const: phy
+ - const: ctrl
+ - const: misc
+
+ clocks:
+ minItems: 5
+ maxItems: 14
+
+ clock-names:
+ minItems: 5
+ maxItems: 14
+
+ fsl,refclk-pad-mode:
+ description: |
+ Specifies the mode of the refclk pad used. It can be UNUSED(PHY
+ refclock is derived from SoC internal source), INPUT(PHY refclock
+ is provided externally via the refclk pad) or OUTPUT(PHY refclock
+ is derived from SoC internal source and provided on the refclk pad).
+ Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants
+ to be used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2 ]
+
+ power-domains:
+ description: |
+ i.MX8Q HSIO SerDes power domains. i.MX8QXP has one SerDes power domains.
+ And i.MX8QM has two.
+ minItems: 1
+ maxItems: 2
+
+required:
+ - compatible
+ - reg
+ - "#phy-cells"
+ - clocks
+ - clock-names
+ - fsl,refclk-pad-mode
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qxp-serdes
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: apb_pclk0
+ - const: pclk0
+ - const: phy0_crr
+ - const: ctl0_crr
+ - const: misc_crr
+ power-domains:
+ minItems: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8qm-serdes
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: pclk0
+ - const: pclk1
+ - const: apb_pclk0
+ - const: apb_pclk1
+ - const: pclk2
+ - const: epcs_tx
+ - const: epcs_rx
+ - const: apb_pclk2
+ - const: phy0_crr
+ - const: phy1_crr
+ - const: ctl0_crr
+ - const: ctl1_crr
+ - const: ctl2_crr
+ - const: misc_crr
+ power-domains:
+ minItems: 2
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-clock.h>
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ #include <dt-bindings/phy/phy-imx8-pcie.h>
+
+ serdes: phy@5f1a0000 {
+ compatible = "fsl,imx8qxp-serdes";
+ reg = <0x5f1a0000 0x10000>,
+ <0x5f120000 0x10000>,
+ <0x5f140000 0x10000>,
+ <0x5f160000 0x10000>;
+ reg-names = "reg", "phy", "ctrl", "misc";
+ clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
+ <&phyx1_lpcg IMX_LPCG_CLK_4>,
+ <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
+ <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
+ <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "apb_pclk0", "pclk0", "phy0_crr", "ctl0_crr",
+ "misc_crr";
+ power-domains = <&pd IMX_SC_R_SERDES_1>;
+ #phy-cells = <3>;
+ status = "disabled";
+ };
+...
Add i.MX8QM and i.MX8QXP HSIO SerDes PHY binding. - Use the controller ID to specify which controller is binded to the PHY. - Introduce one HSIO configuration, mandatory required to set "PCIE_AB_SELECT" and "PHY_X1_EPCS_SEL" during the initialization. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> --- .../bindings/phy/fsl,imx8q-hsio.yaml | 143 ++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8q-hsio.yaml