| Message ID | 1621183560-6668-1-git-send-email-u0084500@gmail.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | [v2,1/2] regulator: rt6160: Add DT binding document for Richtek RT6160 | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/dt-meta-schema | success | |
| robh/dtbs-check | success |
On Mon, May 17, 2021 at 12:45:59AM +0800, cy_huang wrote: > From: ChiYuan Huang <cy_huang@richtek.com> > > Add DT binding document for Richtek RT6160 voltage regulator. > > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > --- > since v2 > - Move buckboost node from patternProperties to Properties. > --- > .../regulator/richtek,rt6160-regulator.yaml | 67 ++++++++++++++++++++++ > 1 file changed, 67 insertions(+) > create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > > diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > new file mode 100644 > index 00000000..4ce1f7c > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > @@ -0,0 +1,67 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Richtek RT6160 BuckBoost converter > + > +maintainers: > + - ChiYuan Huang <cy_huang@richtek.com> > + > +description: | > + The RT6160 is a high-efficiency buck-boost converter that can provide > + up to 3A output current from 2025mV to 5200mV. And it support the wide > + input voltage range from 2200mV to 5500mV. > + > + Datasheet is available at > + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf > + > +properties: > + compatible: > + enum: > + - richtek,rt6160 > + > + reg: > + maxItems: 1 > + > + enable-gpios: > + description: A connection of the 'enable' gpio line. > + maxItems: 1 > + > + richtek,vsel_active_low: richtek,vsel-active-low > + description: | > + Used to indicate the 'vsel' pin active level. if not specified, use > + high active level as the default. > + type: boolean > + > + buckboost: If this is the only regulator, you don't really need a child node here. Just move everything up. > + description: BuckBoost converter regulator description. > + type: object > + $ref: regulator.yaml# > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + rt6160@75 { > + compatible = "richtek,rt6160"; > + reg = <0x75>; > + enable-gpios = <&gpio26 2 0>; > + > + buckboost { > + regulator-name = "rt6160-buckboost"; > + regulator-min-microvolt = <2025000>; > + regulator-max-microvolt = <5200000>; > + regulator-allowed-modes = <0 1>; > + }; > + }; > + }; > -- > 2.7.4 >
Hi, Rob Herring <robh@kernel.org> 於 2021年5月18日 週二 下午9:38寫道： > > On Mon, May 17, 2021 at 12:45:59AM +0800, cy_huang wrote: > > From: ChiYuan Huang <cy_huang@richtek.com> > > > > Add DT binding document for Richtek RT6160 voltage regulator. > > > > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> > > --- > > since v2 > > - Move buckboost node from patternProperties to Properties. > > --- > > .../regulator/richtek,rt6160-regulator.yaml | 67 ++++++++++++++++++++++ > > 1 file changed, 67 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > > > > diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > > new file mode 100644 > > index 00000000..4ce1f7c > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml > > @@ -0,0 +1,67 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Richtek RT6160 BuckBoost converter > > + > > +maintainers: > > + - ChiYuan Huang <cy_huang@richtek.com> > > + > > +description: | > > + The RT6160 is a high-efficiency buck-boost converter that can provide > > + up to 3A output current from 2025mV to 5200mV. And it support the wide > > + input voltage range from 2200mV to 5500mV. > > + > > + Datasheet is available at > > + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf > > + > > +properties: > > + compatible: > > + enum: > > + - richtek,rt6160 > > + > > + reg: > > + maxItems: 1 > > + > > + enable-gpios: > > + description: A connection of the 'enable' gpio line. > > + maxItems: 1 > > + > > + richtek,vsel_active_low: > > richtek,vsel-active-low > Ack in next v3. > > + description: | > > + Used to indicate the 'vsel' pin active level. if not specified, use > > + high active level as the default. > > + type: boolean > > + > > + buckboost: > > If this is the only regulator, you don't really need a child node here. > Just move everything up. > OK, the original thinking is to separate the node to make the regulator property more clear. To put the regulator property up is also good. I'll refine it and resend the v3 patch series, Thanks. > > + description: BuckBoost converter regulator description. > > + type: object > > + $ref: regulator.yaml# > > + > > +required: > > + - compatible > > + - reg > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + rt6160@75 { > > + compatible = "richtek,rt6160"; > > + reg = <0x75>; > > + enable-gpios = <&gpio26 2 0>; > > + > > + buckboost { > > + regulator-name = "rt6160-buckboost"; > > + regulator-min-microvolt = <2025000>; > > + regulator-max-microvolt = <5200000>; > > + regulator-allowed-modes = <0 1>; > > + }; > > + }; > > + }; > > -- > > 2.7.4 > >
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml new file mode 100644 index 00000000..4ce1f7c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6160-regulator.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt6160-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT6160 BuckBoost converter + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT6160 is a high-efficiency buck-boost converter that can provide + up to 3A output current from 2025mV to 5200mV. And it support the wide + input voltage range from 2200mV to 5500mV. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT6160A/DS6160A-00.pdf + +properties: + compatible: + enum: + - richtek,rt6160 + + reg: + maxItems: 1 + + enable-gpios: + description: A connection of the 'enable' gpio line. + maxItems: 1 + + richtek,vsel_active_low: + description: | + Used to indicate the 'vsel' pin active level. if not specified, use + high active level as the default. + type: boolean + + buckboost: + description: BuckBoost converter regulator description. + type: object + $ref: regulator.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rt6160@75 { + compatible = "richtek,rt6160"; + reg = <0x75>; + enable-gpios = <&gpio26 2 0>; + + buckboost { + regulator-name = "rt6160-buckboost"; + regulator-min-microvolt = <2025000>; + regulator-max-microvolt = <5200000>; + regulator-allowed-modes = <0 1>; + }; + }; + };