diff mbox series

[1/5] dt-bindings: qcom_nandc: IPQ5018 QPIC NAND documentation

Message ID 1602307902-16761-2-git-send-email-mdalam@codeaurora.org
State Not Applicable
Headers show
Series mtd: rawnand: qcom: Add support for QSPI nand | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Md Sadre Alam Oct. 10, 2020, 5:31 a.m. UTC
Qualcom IPQ5018 SoC uses QPIC NAND controller version 2.1.1
which uses BAM DMA Engine and QSPI serial nand interface.

Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
---
 Documentation/devicetree/bindings/mtd/qcom_nandc.txt | 3 +++
 1 file changed, 3 insertions(+)

Comments

Rob Herring Oct. 13, 2020, 4:21 p.m. UTC | #1
On Sat, 10 Oct 2020 11:01:38 +0530, Md Sadre Alam wrote:
> Qualcom IPQ5018 SoC uses QPIC NAND controller version 2.1.1
> which uses BAM DMA Engine and QSPI serial nand interface.
> 
> Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/mtd/qcom_nandc.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
index 5c2fba4..0bfa316 100644
--- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
@@ -8,6 +8,9 @@  Required properties:
                             IPQ4019 SoC and it uses BAM DMA
     * "qcom,ipq8074-nand" - for QPIC NAND controller v1.5.0 being used in
                             IPQ8074 SoC and it uses BAM DMA
+    * "qcom,ipq5018-nand" - for QPIC NAND controller v2.1.1 being used in
+                            IPQ5018 SoC and it uses BAM DMA and QSPI serial
+                            nand interface.
 
 - reg:			MMIO address range
 - clocks:		must contain core clock and always on clock