[V2] dt-bindings: gpio: Convert vf610 to json-schema

diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt b/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
deleted file mode 100644
index ae254aa..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-vf610.txt
+++ /dev/null
@@ -1,63 +0,0 @@ 
-* Freescale VF610 PORT/GPIO module
-
-The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
-functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
-each, and each PORT module has its own interrupt.
-
-Required properties for GPIO node:
-- compatible : Should be "fsl,<soc>-gpio", below is supported list:
-	       "fsl,vf610-gpio"
-	       "fsl,imx7ulp-gpio"
-- reg : The first reg tuple represents the PORT module, the second tuple
-  the GPIO module.
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
-  The second cell bits[3:0] is used to specify trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-Optional properties:
--clocks:	Must contain an entry for each entry in clock-names.
-		See common clock-bindings.txt for details.
--clock-names:	A list of clock names. For imx7ulp, it must contain
-		"gpio", "port".
-
-Note: Each GPIO port should have an alias correctly numbered in "aliases"
-node.
-
-Examples:
-
-aliases {
-	gpio0 = &gpio1;
-	gpio1 = &gpio2;
-};
-
-gpio1: gpio@40049000 {
-	compatible = "fsl,vf610-gpio";
-	reg = <0x40049000 0x1000 0x400ff000 0x40>;
-	interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	gpio-ranges = <&iomuxc 0 0 32>;
-};
-
-gpio2: gpio@4004a000 {
-	compatible = "fsl,vf610-gpio";
-	reg = <0x4004a000 0x1000 0x400ff040 0x40>;
-	interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	gpio-ranges = <&iomuxc 0 32 32>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
new file mode 100644
index 0000000..6ac5a78
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -0,0 +1,81 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-vf610.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale VF610 PORT/GPIO module
+
+maintainers:
+  - Stefan Agner <stefan@agner.ch>
+
+description: |
+  The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
+  functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
+  each, and each PORT module has its own interrupt.
+
+  Note: Each GPIO port should have an alias correctly numbered in "aliases"
+  node.
+
+properties:
+  compatible:
+    enum:
+      - fsl,vf610-gpio
+      - fsl,imx7ulp-gpio
+
+  reg:
+    description: The first reg tuple represents the PORT module, the second tuple
+      represents the GPIO module.
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  clocks:
+    items:
+      - description: SoC GPIO clock
+      - description: SoC PORT clock
+
+  clock-names:
+    items:
+      - const: gpio
+      - const: port
+
+  gpio-ranges:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio1: gpio@40049000 {
+        compatible = "fsl,vf610-gpio";
+        reg = <0x40049000 0x1000>, <0x400ff000 0x40>;
+        interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&iomuxc 0 0 32>;
+    };