diff mbox series

[v6,1/4] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings

Message ID 1593673564-4425-2-git-send-email-EastL.Lee@mediatek.com
State Changes Requested
Headers show
Series [v6,1/4] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings | expand

Checks

Context Check Description
robh/dt-meta-schema success
robh/checkpatch success

Commit Message

EastL July 2, 2020, 7:06 a.m. UTC
Document the devicetree bindings for MediaTek Command-Queue DMA controller
which could be found on MT6779 SoC or other similar Mediatek SoCs.

Signed-off-by: EastL Lee <EastL.Lee@mediatek.com>
---
 .../devicetree/bindings/dma/mtk-cqdma.yaml         | 113 +++++++++++++++++++++
 1 file changed, 113 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.yaml

Comments

Rob Herring July 9, 2020, 8:59 p.m. UTC | #1
On Thu, Jul 02, 2020 at 03:06:01PM +0800, EastL Lee wrote:
> Document the devicetree bindings for MediaTek Command-Queue DMA controller
> which could be found on MT6779 SoC or other similar Mediatek SoCs.
> 
> Signed-off-by: EastL Lee <EastL.Lee@mediatek.com>
> ---
>  .../devicetree/bindings/dma/mtk-cqdma.yaml         | 113 +++++++++++++++++++++
>  1 file changed, 113 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> 
> diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> new file mode 100644
> index 0000000..83ed742
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> @@ -0,0 +1,113 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/mtk-cqdma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek Command-Queue DMA controller Device Tree Binding
> +
> +maintainers:
> +  - EastL Lee <EastL.Lee@mediatek.com>
> +
> +description:
> +  MediaTek Command-Queue DMA controller (CQDMA) on Mediatek SoC
> +  is dedicated to memory-to-memory transfer through queue based
> +  descriptor management.
> +
> +allOf:
> +  - $ref: "dma-controller.yaml#"
> +
> +properties:
> +  "#dma-cells":
> +    minimum: 1
> +    maximum: 255
> +    description:
> +      Used to provide DMA controller specific information.

No, for a specific binding like this, it should be 1 defined value.

> +
> +  compatible:
> +    oneOf:
> +      - const: mediatek,mt6765-cqdma
> +      - const: mediatek,mt6779-cqdma
> +
> +  reg:
> +    minItems: 1
> +    maxItems: 5
> +    description:
> +        A base address of MediaTek Command-Queue DMA controller,
> +        a channel will have a set of base address.
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 5
> +    description:
> +        A interrupt number of MediaTek Command-Queue DMA controller,
> +        one interrupt number per dma-channels.
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: cqdma
> +
> +  dma-channel-mask:
> +    $ref: /schemas/types.yaml#definitions/uint32

Alreay has a type, don't redefine it here.

> +    description:
> +       For DMA capability, We will know the addressing capability of
> +       MediaTek Command-Queue DMA controller through dma-channel-mask.

This sounds like the kernel's DMA masks which is not what this property 
is.

> +    items:
> +      minItems: 1
> +      maxItems: 63

An array of 63 elements?

I think you want:

minimum: 1
maximum: 63

Or:

enum: [ 1, 3, 7, 0xf, 0x1f, 0x3f ]

(Though if this works, then just 'dma-channels' is enough.)

> +
> +  dma-channels:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    description:
> +      Number of DMA channels supported by MediaTek Command-Queue DMA
> +      controller, support up to five.

Is it 5 or 6 channels? You're off by one somewhere.

> +    items:
> +      minItems: 1
> +      maxItems: 5
> +
> +  dma-requests:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    description:
> +      Number of DMA request (virtual channel) supported by MediaTek
> +      Command-Queue DMA controller, support up to 32.
> +    items:
> +      minItems: 1
> +      maxItems: 32

You are describing how many elements in an array and this is a scalar.

> +
> +required:
> +  - "#dma-cells"
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - dma-channel-mask
> +  - dma-channels
> +  - dma-requests
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/mt6779-clk.h>
> +    cqdma: dma-controller@10212000 {
> +        compatible = "mediatek,mt6779-cqdma";
> +        reg = <0x10212000 0x80>,
> +            <0x10212080 0x80>,
> +            <0x10212100 0x80>;
> +        interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>,
> +            <GIC_SPI 140 IRQ_TYPE_LEVEL_LOW>,
> +            <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
> +        clocks = <&infracfg_ao CLK_INFRA_CQ_DMA>;
> +        clock-names = "cqdma";
> +        dma-channel-mask = <63>;
> +        dma-channels = <3>;
> +        dma-requests = <32>;
> +        #dma-cells = <1>;
> +    };
> +
> +...
> -- 
> 1.9.1
EastL July 22, 2020, 11:19 a.m. UTC | #2
On Thu, 2020-07-09 at 14:59 -0600, Rob Herring wrote:
> On Thu, Jul 02, 2020 at 03:06:01PM +0800, EastL Lee wrote:
> > Document the devicetree bindings for MediaTek Command-Queue DMA controller
> > which could be found on MT6779 SoC or other similar Mediatek SoCs.
> > 
> > Signed-off-by: EastL Lee <EastL.Lee@mediatek.com>
> > ---
> >  .../devicetree/bindings/dma/mtk-cqdma.yaml         | 113 +++++++++++++++++++++
> >  1 file changed, 113 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> > new file mode 100644
> > index 0000000..83ed742
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
> > @@ -0,0 +1,113 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/dma/mtk-cqdma.yaml*__;Iw!!CTRNKA9wMg0ARbw!1P_if3RiZOVpzN8n4EQI0IxZq0d07UksSgeHYA0h6HLylU9l4pu2eggq7eeVsF2H$ 
> > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!1P_if3RiZOVpzN8n4EQI0IxZq0d07UksSgeHYA0h6HLylU9l4pu2eggq7ZMPow23$ 
> > +
> > +title: MediaTek Command-Queue DMA controller Device Tree Binding
> > +
> > +maintainers:
> > +  - EastL Lee <EastL.Lee@mediatek.com>
> > +
> > +description:
> > +  MediaTek Command-Queue DMA controller (CQDMA) on Mediatek SoC
> > +  is dedicated to memory-to-memory transfer through queue based
> > +  descriptor management.
> > +
> > +allOf:
> > +  - $ref: "dma-controller.yaml#"
> > +
> > +properties:
> > +  "#dma-cells":
> > +    minimum: 1
> > +    maximum: 255
> > +    description:
> > +      Used to provide DMA controller specific information.
> 
> No, for a specific binding like this, it should be 1 defined value.
OK.I'll fix it to const 1
> 
> > +
> > +  compatible:
> > +    oneOf:
> > +      - const: mediatek,mt6765-cqdma
> > +      - const: mediatek,mt6779-cqdma
> > +
> > +  reg:
> > +    minItems: 1
> > +    maxItems: 5
> > +    description:
> > +        A base address of MediaTek Command-Queue DMA controller,
> > +        a channel will have a set of base address.
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 5
> > +    description:
> > +        A interrupt number of MediaTek Command-Queue DMA controller,
> > +        one interrupt number per dma-channels.
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    const: cqdma
> > +
> > +  dma-channel-mask:
> > +    $ref: /schemas/types.yaml#definitions/uint32
> 
> Alreay has a type, don't redefine it here.
OK
> 
> > +    description:
> > +       For DMA capability, We will know the addressing capability of
> > +       MediaTek Command-Queue DMA controller through dma-channel-mask.
> 
> This sounds like the kernel's DMA masks which is not what this property 
> is.
Yes, this is for kernel's DMA mask.
Do I need to declare this member again?
> 
> > +    items:
> > +      minItems: 1
> > +      maxItems: 63
> 
> An array of 63 elements?
> 
> I think you want:
> 
> minimum: 1
> maximum: 63
> 
> Or:
> 
> enum: [ 1, 3, 7, 0xf, 0x1f, 0x3f ]
> 
> (Though if this works, then just 'dma-channels' is enough.)
> 
> > +
> > +  dma-channels:
> > +    $ref: /schemas/types.yaml#definitions/uint32
> > +    description:
> > +      Number of DMA channels supported by MediaTek Command-Queue DMA
> > +      controller, support up to five.
> 
> Is it 5 or 6 channels? You're off by one somewhere.
Currently chip CQDMA only has three channels at most, I'll fix it to
maxnum 3
> > +    items:
> > +      minItems: 1
> > +      maxItems: 5
> > +
> > +  dma-requests:
> > +    $ref: /schemas/types.yaml#definitions/uint32
> > +    description:
> > +      Number of DMA request (virtual channel) supported by MediaTek
> > +      Command-Queue DMA controller, support up to 32.
> > +    items:
> > +      minItems: 1
> > +      maxItems: 32
> 
> You are describing how many elements in an array and this is a scalar.
OK I;ll fix to minnum & maxnum
> 
> > +
> > +required:
> > +  - "#dma-cells"
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - dma-channel-mask
> > +  - dma-channels
> > +  - dma-requests
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/mt6779-clk.h>
> > +    cqdma: dma-controller@10212000 {
> > +        compatible = "mediatek,mt6779-cqdma";
> > +        reg = <0x10212000 0x80>,
> > +            <0x10212080 0x80>,
> > +            <0x10212100 0x80>;
> > +        interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>,
> > +            <GIC_SPI 140 IRQ_TYPE_LEVEL_LOW>,
> > +            <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
> > +        clocks = <&infracfg_ao CLK_INFRA_CQ_DMA>;
> > +        clock-names = "cqdma";
> > +        dma-channel-mask = <63>;
> > +        dma-channels = <3>;
> > +        dma-requests = <32>;
> > +        #dma-cells = <1>;
> > +    };
> > +
> > +...
> > -- 
> > 1.9.1
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
new file mode 100644
index 0000000..83ed742
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.yaml
@@ -0,0 +1,113 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mtk-cqdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Command-Queue DMA controller Device Tree Binding
+
+maintainers:
+  - EastL Lee <EastL.Lee@mediatek.com>
+
+description:
+  MediaTek Command-Queue DMA controller (CQDMA) on Mediatek SoC
+  is dedicated to memory-to-memory transfer through queue based
+  descriptor management.
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    minimum: 1
+    maximum: 255
+    description:
+      Used to provide DMA controller specific information.
+
+  compatible:
+    oneOf:
+      - const: mediatek,mt6765-cqdma
+      - const: mediatek,mt6779-cqdma
+
+  reg:
+    minItems: 1
+    maxItems: 5
+    description:
+        A base address of MediaTek Command-Queue DMA controller,
+        a channel will have a set of base address.
+
+  interrupts:
+    minItems: 1
+    maxItems: 5
+    description:
+        A interrupt number of MediaTek Command-Queue DMA controller,
+        one interrupt number per dma-channels.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: cqdma
+
+  dma-channel-mask:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description:
+       For DMA capability, We will know the addressing capability of
+       MediaTek Command-Queue DMA controller through dma-channel-mask.
+    items:
+      minItems: 1
+      maxItems: 63
+
+  dma-channels:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description:
+      Number of DMA channels supported by MediaTek Command-Queue DMA
+      controller, support up to five.
+    items:
+      minItems: 1
+      maxItems: 5
+
+  dma-requests:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description:
+      Number of DMA request (virtual channel) supported by MediaTek
+      Command-Queue DMA controller, support up to 32.
+    items:
+      minItems: 1
+      maxItems: 32
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dma-channel-mask
+  - dma-channels
+  - dma-requests
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt6779-clk.h>
+    cqdma: dma-controller@10212000 {
+        compatible = "mediatek,mt6779-cqdma";
+        reg = <0x10212000 0x80>,
+            <0x10212080 0x80>,
+            <0x10212100 0x80>;
+        interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>,
+            <GIC_SPI 140 IRQ_TYPE_LEVEL_LOW>,
+            <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&infracfg_ao CLK_INFRA_CQ_DMA>;
+        clock-names = "cqdma";
+        dma-channel-mask = <63>;
+        dma-channels = <3>;
+        dma-requests = <32>;
+        #dma-cells = <1>;
+    };
+
+...