From patchwork Thu Jun 18 03:22:56 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Anson Huang X-Patchwork-Id: 1311722 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=nxp.com Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 49nSGg07K3z9sRf for ; Thu, 18 Jun 2020 13:34:19 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727113AbgFRDeR (ORCPT ); Wed, 17 Jun 2020 23:34:17 -0400 Received: from inva020.nxp.com ([92.121.34.13]:44926 "EHLO inva020.nxp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726969AbgFRDeQ (ORCPT ); Wed, 17 Jun 2020 23:34:16 -0400 Received: from inva020.nxp.com (localhost [127.0.0.1]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id E1D891A008A; Thu, 18 Jun 2020 05:34:12 +0200 (CEST) Received: from invc005.ap-rdc01.nxp.com (invc005.ap-rdc01.nxp.com [165.114.16.14]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 61E561A0045; Thu, 18 Jun 2020 05:34:06 +0200 (CEST) Received: from localhost.localdomain (shlinux2.ap.freescale.net [10.192.224.44]) by invc005.ap-rdc01.nxp.com (Postfix) with ESMTP id 5FC73402F3; Thu, 18 Jun 2020 11:33:58 +0800 (SGT) From: Anson Huang To: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, ulf.hansson@linaro.org, s.trumtrar@pengutronix.de, aisheng.dong@nxp.com, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org Cc: Linux-imx@nxp.com Subject: [PATCH V4 1/3] dt-bindings: mmc: Convert imx esdhc to json-schema Date: Thu, 18 Jun 2020 11:22:56 +0800 Message-Id: <1592450578-30140-1-git-send-email-Anson.Huang@nxp.com> X-Mailer: git-send-email 2.7.4 X-Virus-Scanned: ClamAV using ClamSMTP Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Convert the i.MX ESDHC binding to DT schema format using json-schema Signed-off-by: Anson Huang --- No change. --- .../devicetree/bindings/mmc/fsl-imx-esdhc.txt | 67 ----------- .../devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 124 +++++++++++++++++++++ 2 files changed, 124 insertions(+), 67 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt create mode 100644 Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt deleted file mode 100644 index de1b8bd..0000000 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX - -The Enhanced Secure Digital Host Controller on Freescale i.MX family -provides an interface for MMC, SD, and SDIO types of memory cards. - -This file documents differences between the core properties described -by mmc.txt and the properties used by the sdhci-esdhc-imx driver. - -Required properties: -- compatible : Should be "fsl,-esdhc", the supported chips include - "fsl,imx25-esdhc" - "fsl,imx35-esdhc" - "fsl,imx51-esdhc" - "fsl,imx53-esdhc" - "fsl,imx6q-usdhc" - "fsl,imx6sl-usdhc" - "fsl,imx6sx-usdhc" - "fsl,imx6ull-usdhc" - "fsl,imx7d-usdhc" - "fsl,imx7ulp-usdhc" - "fsl,imx8mq-usdhc" - "fsl,imx8mm-usdhc" - "fsl,imx8mn-usdhc" - "fsl,imx8mp-usdhc" - "fsl,imx8qm-usdhc" - "fsl,imx8qxp-usdhc" - -Optional properties: -- fsl,wp-controller : Indicate to use controller internal write protection -- fsl,delay-line : Specify the number of delay cells for override mode. - This is used to set the clock delay for DLL(Delay Line) on override mode - to select a proper data sampling window in case the clock quality is not good - due to signal path is too long on the board. Please refer to eSDHC/uSDHC - chapter, DLL (Delay Line) section in RM for details. -- voltage-ranges : Specify the voltage range in case there are software - transparent level shifters on the outputs of the controller. Two cells are - required, first cell specifies minimum slot voltage (mV), second cell - specifies maximum slot voltage (mV). Several ranges could be specified. -- fsl,tuning-start-tap: Specify the start dealy cell point when send first CMD19 - in tuning procedure. -- fsl,tuning-step: Specify the increasing delay cell steps in tuning procedure. - The uSDHC use one delay cell as default increasing step to do tuning process. - This property allows user to change the tuning step to more than one delay - cells which is useful for some special boards or cards when the default - tuning step can't find the proper delay window within limited tuning retries. -- fsl,strobe-dll-delay-target: Specify the strobe dll control slave delay target. - This delay target programming host controller loopback read clock, and this - property allows user to change the delay target for the strobe input read clock. - If not use this property, driver default set the delay target to value 7. - Only eMMC HS400 mode need to take care of this property. - -Examples: - -esdhc@70004000 { - compatible = "fsl,imx51-esdhc"; - reg = <0x70004000 0x4000>; - interrupts = <1>; - fsl,wp-controller; -}; - -esdhc@70008000 { - compatible = "fsl,imx51-esdhc"; - reg = <0x70008000 0x4000>; - interrupts = <2>; - cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */ - wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */ -}; diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml new file mode 100644 index 0000000..75dc116 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX + +maintainers: + - Shawn Guo + +allOf: + - $ref: "mmc-controller.yaml" + +description: | + The Enhanced Secure Digital Host Controller on Freescale i.MX family + provides an interface for MMC, SD, and SDIO types of memory cards. + + This file documents differences between the core properties described + by mmc.txt and the properties used by the sdhci-esdhc-imx driver. + +properties: + compatible: + enum: + - fsl,imx25-esdhc + - fsl,imx35-esdhc + - fsl,imx51-esdhc + - fsl,imx53-esdhc + - fsl,imx6q-usdhc + - fsl,imx6sl-usdhc + - fsl,imx6sx-usdhc + - fsl,imx6ull-usdhc + - fsl,imx7d-usdhc + - fsl,imx7ulp-usdhc + - fsl,imx8mq-usdhc + - fsl,imx8mm-usdhc + - fsl,imx8mn-usdhc + - fsl,imx8mp-usdhc + - fsl,imx8qm-usdhc + - fsl,imx8qxp-usdhc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,wp-controller: + description: | + boolean, if present, indicate to use controller internal write protection. + type: boolean + + fsl,delay-line: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specify the number of delay cells for override mode. + This is used to set the clock delay for DLL(Delay Line) on override mode + to select a proper data sampling window in case the clock quality is not good + due to signal path is too long on the board. Please refer to eSDHC/uSDHC + chapter, DLL (Delay Line) section in RM for details. + default: 0 + + voltage-ranges: + $ref: '/schemas/types.yaml#/definitions/uint32-matrix' + description: | + Specify the voltage range in case there are software transparent level + shifters on the outputs of the controller. Two cells are required, first + cell specifies minimum slot voltage (mV), second cell specifies maximum + slot voltage (mV). + items: + items: + - description: value for minimum slot voltage + - description: value for maximum slot voltage + maxItems: 1 + + fsl,tuning-start-tap: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specify the start delay cell point when send first CMD19 in tuning procedure. + default: 0 + + fsl,tuning-step: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specify the increasing delay cell steps in tuning procedure. + The uSDHC use one delay cell as default increasing step to do tuning process. + This property allows user to change the tuning step to more than one delay + cells which is useful for some special boards or cards when the default + tuning step can't find the proper delay window within limited tuning retries. + default: 0 + + fsl,strobe-dll-delay-target: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Specify the strobe dll control slave delay target. + This delay target programming host controller loopback read clock, and this + property allows user to change the delay target for the strobe input read clock. + If not use this property, driver default set the delay target to value 7. + Only eMMC HS400 mode need to take care of this property. + default: 0 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + mmc@70004000 { + compatible = "fsl,imx51-esdhc"; + reg = <0x70004000 0x4000>; + interrupts = <1>; + fsl,wp-controller; + }; + + mmc@70008000 { + compatible = "fsl,imx51-esdhc"; + reg = <0x70008000 0x4000>; + interrupts = <2>; + cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */ + wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */ + };