| Message ID | 1576686157-11939-3-git-send-email-eugen.hristev@microchip.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | Enhancements to at91-sama5d2_adc and rtc trigger | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success |
On Wed, 18 Dec 2019 16:23:58 +0000 <Eugen.Hristev@microchip.com> wrote: > From: Eugen Hristev <eugen.hristev@microchip.com> > > Add property to connect RTC-type trigger to the ADC block. > The ADC is connected internally with a line to the RTC block. > The RTC can provide a trigger signal to the ADC to start conversions. > > Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> As discussed, might want to just be the rtc handle rather than a new trigger one. > --- > Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt > index 4a3c1d4..1980f0e 100644 > --- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt > +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt > @@ -23,6 +23,9 @@ Optional properties: > See ../../dma/dma.txt for details. > - #io-channel-cells: in case consumer drivers are attached, this must be 1. > See <Documentation/devicetree/bindings/iio/iio-bindings.txt> for details. > + - atmel,rtc-trigger: The ADC IP block can be triggered by the RTC block > +inside the SoC. This property is a phandle to a node that provides a > +trigger device, if the ADC block supports it. Do we want to be more specific on devices that do support it? Maybe it's enough of a complex mess that we don't. > > Properties for consumer drivers: > - Consumer drivers can be connected to this producer device, as specified > @@ -44,6 +47,7 @@ adc: adc@fc030000 { > vddana-supply = <&vdd_3v3_lp_reg>; > vref-supply = <&vdd_3v3_lp_reg>; > atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>; > + atmel,rtc-trigger = <&rtc_adc_trigger>; > dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; > dma-names = "rx"; > #io-channel-cells = <1>;
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt index 4a3c1d4..1980f0e 100644 --- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt @@ -23,6 +23,9 @@ Optional properties: See ../../dma/dma.txt for details. - #io-channel-cells: in case consumer drivers are attached, this must be 1. See <Documentation/devicetree/bindings/iio/iio-bindings.txt> for details. + - atmel,rtc-trigger: The ADC IP block can be triggered by the RTC block +inside the SoC. This property is a phandle to a node that provides a +trigger device, if the ADC block supports it. Properties for consumer drivers: - Consumer drivers can be connected to this producer device, as specified @@ -44,6 +47,7 @@ adc: adc@fc030000 { vddana-supply = <&vdd_3v3_lp_reg>; vref-supply = <&vdd_3v3_lp_reg>; atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>; + atmel,rtc-trigger = <&rtc_adc_trigger>; dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; dma-names = "rx"; #io-channel-cells = <1>;