diff mbox series

[V4,1/3] dt-bindings: hwmon: Add tachometer interrupt to pwm-fan

Message ID 1554214910-29925-2-git-send-email-stefan.wahren@i2se.com
State Not Applicable, archived
Headers show
Series hwmon: pwm-fan: Add RPM support | expand

Commit Message

Stefan Wahren April 2, 2019, 2:21 p.m. UTC
This adds the tachometer interrupt to the pwm-fan binding, which is
necessary for RPM support.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/hwmon/pwm-fan.txt | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
index 49ca5d8..6ced829b 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -7,7 +7,16 @@  Required properties:
 			which correspond to thermal cooling states
 
 Optional properties:
-- fan-supply    : phandle to the regulator that provides power to the fan
+- fan-supply		: phandle to the regulator that provides power to the fan
+- interrupts		: This contains a single interrupt specifier which
+			  describes the tachometer output of the fan as an
+			  interrupt source. The output signal must generate a
+			  defined number of interrupts per fan revolution, which
+			  require that it must be self resetting edge interrupts.
+			  See interrupt-controller/interrupts.txt for the format.
+- pulses-per-revolution : define the tachometer pulses per fan revolution as
+			  an integer (default is 2 interrupts per revolution).
+			  The value must be greater than zero.
 
 Example:
 	fan0: pwm-fan {
@@ -38,3 +47,13 @@  Example:
 					};
 			     };
 		};
+
+Example 2:
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 40000 0>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		pulses-per-revolution = <2>;
+	};