diff mbox series

[1/2] regulator: dt-bindings: add regulator-state-standby bindings

Message ID 1542120469-15450-2-git-send-email-andrei.stefanescu@microchip.com
State Not Applicable, archived
Headers show
Series set regulator constraints for standby state | expand


Context Check Description
robh/checkpatch warning "total: 0 errors, 1 warnings, 17 lines checked"

Commit Message

Andrei.Stefanescu@microchip.com Nov. 13, 2018, 2:47 p.m. UTC
For state-mem and state-disk regulators can have
various parameters applied such as enabled/disabled,
current mode, voltage etc.

This patch adds documentation on how to set these parameters
in the device tree for the standby state.

Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com>
 Documentation/devicetree/bindings/regulator/regulator.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox series


diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 0c3a243..0a3f087 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -33,13 +33,16 @@  Optional properties:
   decreases of any level. This is useful for regulators with exponential
   voltage changes.
 - regulator-soft-start: Enable soft start so that voltage ramps slowly
+- regulator-state-standby sub-root node for Standby mode
+  : equivalent with standby Linux sleep state, which provides energy savings
+  with a relatively quick transition back time.
 - regulator-state-mem sub-root node for Suspend-to-RAM mode
   : suspend to memory, the device goes to sleep, but all data stored in memory,
   only some external interrupt can wake the device.
 - regulator-state-disk sub-root node for Suspend-to-DISK mode
   : suspend to disk, this state operates similarly to Suspend-to-RAM,
   but includes a final step of writing memory contents to disk.
-- regulator-state-[mem/disk] node has following common properties:
+- regulator-state-[mem/disk/standby] node has following common properties:
 	- regulator-on-in-suspend: regulator should be on in suspend state.
 	- regulator-off-in-suspend: regulator should be off in suspend state.
 	- regulator-suspend-min-microvolt: minimum voltage may be set in