| Message ID | 1529239789-26849-3-git-send-email-aisheng.dong@nxp.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | None | expand |
On Sun, Jun 17, 2018 at 08:49:47PM +0800, Dong Aisheng wrote: > The Messaging Unit module enables two processors within > the SoC to communicate and coordinate by passing messages > (e.g. data, status and control) through the MU interface. > > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Sascha Hauer <kernel@pengutronix.de> > Cc: Fabio Estevam <fabio.estevam@nxp.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: devicetree@vger.kernel.org > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > --- > v1->v2: > * typo fixes > * remove status property > * remove imx6&7 compatible string which may be added later for > the generic mailbox binding > > Note: Because MU used by SCU is not implemented as a mailbox driver, > Instead, they're provided in library calls to gain higher performance. Using a binding doesn't mean you have to use an OS's subsystem. What needs higher performance? What's the performance difference? Why can't the mailbox framework be improved? > Futhermore, SCU MU has only one channel. But the binding doc claims > (Change to allow 0?) > So we did not follow the mailbox binding. > > For the generic mailbox driver binding way, it may be added later. The h/w isn't changing later, so no. > --- > .../devicetree/bindings/arm/freescale/fsl,mu.txt | 32 ++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,mu.txt -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jun 20, 2018 at 01:43:10PM -0600, Rob Herring wrote: > On Sun, Jun 17, 2018 at 08:49:47PM +0800, Dong Aisheng wrote: > > The Messaging Unit module enables two processors within > > the SoC to communicate and coordinate by passing messages > > (e.g. data, status and control) through the MU interface. > > > > Cc: Shawn Guo <shawnguo@kernel.org> > > Cc: Sascha Hauer <kernel@pengutronix.de> > > Cc: Fabio Estevam <fabio.estevam@nxp.com> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Mark Rutland <mark.rutland@arm.com> > > Cc: devicetree@vger.kernel.org > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > > --- > > v1->v2: > > * typo fixes > > * remove status property > > * remove imx6&7 compatible string which may be added later for > > the generic mailbox binding > > > > Note: Because MU used by SCU is not implemented as a mailbox driver, > > Instead, they're provided in library calls to gain higher performance. > > Using a binding doesn't mean you have to use an OS's subsystem. > > What needs higher performance? What's the performance difference? Why > can't the mailbox framework be improved? >From what I see the performance is improved by polling the interrupt registers rather than using interrupts. I see no reason though why this can't be implemented with the mailbox framework as is. Sascha
Hi Sascha, > -----Original Message----- > From: Sascha Hauer [mailto:s.hauer@pengutronix.de] > Sent: Thursday, June 21, 2018 3:47 PM > To: Rob Herring <robh@kernel.org> > Cc: A.s. Dong <aisheng.dong@nxp.com>; linux-arm- > kernel@lists.infradead.org; dongas86@gmail.com; kernel@pengutronix.de; > shawnguo@kernel.org; Fabio Estevam <fabio.estevam@nxp.com>; dl-linux- > imx <linux-imx@nxp.com>; Mark Rutland <mark.rutland@arm.com>; > devicetree@vger.kernel.org > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding doc > > On Wed, Jun 20, 2018 at 01:43:10PM -0600, Rob Herring wrote: > > On Sun, Jun 17, 2018 at 08:49:47PM +0800, Dong Aisheng wrote: > > > The Messaging Unit module enables two processors within the SoC to > > > communicate and coordinate by passing messages (e.g. data, status > > > and control) through the MU interface. > > > > > > Cc: Shawn Guo <shawnguo@kernel.org> > > > Cc: Sascha Hauer <kernel@pengutronix.de> > > > Cc: Fabio Estevam <fabio.estevam@nxp.com> > > > Cc: Rob Herring <robh+dt@kernel.org> > > > Cc: Mark Rutland <mark.rutland@arm.com> > > > Cc: devicetree@vger.kernel.org > > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > > > --- > > > v1->v2: > > > * typo fixes > > > * remove status property > > > * remove imx6&7 compatible string which may be added later for > > > the generic mailbox binding > > > > > > Note: Because MU used by SCU is not implemented as a mailbox driver, > > > Instead, they're provided in library calls to gain higher performance. > > > > Using a binding doesn't mean you have to use an OS's subsystem. > > > > What needs higher performance? What's the performance difference? > Why > > can't the mailbox framework be improved? > > From what I see the performance is improved by polling the interrupt > registers rather than using interrupts. > I see no reason though why this can't be implemented with the mailbox > framework as is. > I thought you've agreed to not write generic MU(mailbox) driver for SCU. https://www.spinics.net/lists/arm-kernel/msg650217.html But seems it's still not quite certain... I'd like to explain some more. 1) the interrupt mechanism is not quite suitable for SCU firmware protocol as the transfer size would be more than 4 words and the response data size is also undetermined (it's set by SCU firmware side during a response). So polling mode may be the best way to handle this as MU message handling usually is quite fast in a few microseconds. 2) It's true that Mailbox framework is well designed and powerful. But it's not quite suitable for SCU MU as we don't need to use the most bits of it. Mailbox seems like to be more suitable for a generic MU mailbox driver used by various clients/servers. But SCU MU are quite specific to SCU protocol and can't be used by other clients (MU 0~4 is fixed for SCU communication in MX8 HW design). Even we write a MU Mailbox driver for SCU MU, it's still not a general one and can't be used by others (e.g. communication with M4). So I'd believe the current library way is still the best approach for SCU MU Using. But I'm also okay for another generic MU drivers for other common communications between A core and M4 side. 3) We actually have tried the MU(Mailbox) internally, it increased a lot complexity comparing to the current library way and got a booting time regression issue due to extra delays introduced in handling SCU protocol in mailbox way. And finally a nature question to us is: What the benefit we can get for SCU MU using a mailbox way? If we can't find benefits but introduce more complexities then why we would do that way? Regards Dong Aisheng > Sascha > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | > https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fww > w.pengutronix.de%2F&data=02%7C01%7Caisheng.dong%40nxp.com%7C8ec > 827973f6e40d1fe1508d5d74b2471%7C686ea1d3bc2b4c6fa92cd99c5c301635% > 7C0%7C0%7C636651640089438560&sdata=oRARdjilF4Ve2%2FnsXVhG7fmjXip > H0HslgDMldbIGgY0%3D&reserved=0 | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Thu, Jun 21, 2018 at 05:11:33PM +0000, A.s. Dong wrote: > Hi Sascha, > > On Wed, Jun 20, 2018 at 01:43:10PM -0600, Rob Herring wrote: > > > On Sun, Jun 17, 2018 at 08:49:47PM +0800, Dong Aisheng wrote: > > > > The Messaging Unit module enables two processors within the SoC to > > > > communicate and coordinate by passing messages (e.g. data, status > > > > and control) through the MU interface. > > > > > > > > --- > > > > v1->v2: > > > > * typo fixes > > > > * remove status property > > > > * remove imx6&7 compatible string which may be added later for > > > > the generic mailbox binding > > > > > > > > Note: Because MU used by SCU is not implemented as a mailbox driver, > > > > Instead, they're provided in library calls to gain higher performance. > > > > > > Using a binding doesn't mean you have to use an OS's subsystem. > > > > > > What needs higher performance? What's the performance difference? > > Why > > > can't the mailbox framework be improved? > > > > From what I see the performance is improved by polling the interrupt > > registers rather than using interrupts. > > I see no reason though why this can't be implemented with the mailbox > > framework as is. > > > > I thought you've agreed to not write generic MU(mailbox) driver for SCU. > https://www.spinics.net/lists/arm-kernel/msg650217.html > But seems it's still not quite certain... > > I'd like to explain some more. > > 1) the interrupt mechanism is not quite suitable for SCU firmware protocol > as the transfer size would be more than 4 words and the response data size > is also undetermined (it's set by SCU firmware side during a response). > So polling mode may be the best way to handle this as MU message > handling usually is quite fast in a few microseconds. > > 2) It's true that Mailbox framework is well designed and powerful. > But it's not quite suitable for SCU MU as we don't need to use the most > bits of it. Mailbox seems like to be more suitable for a generic MU > mailbox driver used by various clients/servers. But SCU MU are > quite specific to SCU protocol and can't be used by other clients > (MU 0~4 is fixed for SCU communication in MX8 HW design). > Even we write a MU Mailbox driver for SCU MU, it's still not a general > one and can't be used by others (e.g. communication with M4). > So I'd believe the current library way is still the best approach for SCU MU > Using. But I'm also okay for another generic MU drivers for other common > communications between A core and M4 side. > > 3) We actually have tried the MU(Mailbox) internally, it increased a lot > complexity comparing to the current library way and got a booting time > regression issue due to extra delays introduced in handling SCU protocol > in mailbox way. > > And finally a nature question to us is: > What the benefit we can get for SCU MU using a mailbox way? > > If we can't find benefits but introduce more complexities then why > we would do that way? Looks like my response to same topic within my patch set is lost, so I repost it here: ok.. let's take some of IMX8 SCU driver code to see if there any difference: ..this part of the code is blocking write procedure for one channeler (register or what ever name you prefer) per write.. correct? +void mu_send_msg(struct mu_priv *priv, uint32_t index, uint32_t msg) +{ + uint32_t mask = MU_SR_TE0_MASK >> index; + + /* Wait TX register to be empty. */ + while (!(readl_relaxed(priv->base + MU_ASR) & mask)) + ; + writel_relaxed(msg, priv->base + MU_ATR0 + (index * 4)); +} +EXPORT_SYMBOL_GPL(mu_send_msg); According to documentation it is recommended to use only one status bit for the last register to use MU as one big 4words sized pipe. But, there is no way you can write to all 4 registers without checking status for each of this register, because your protocol has dynamic message size. So you are forced to use your one channel as 4 separate channels. Write it part of the message separately and allow your firmware read 1 word to understand how to behave on the rest of the message. +static void sc_ipc_write(struct sc_ipc *sc_ipc, void *data) +{ + sc_rpc_msg_t *msg = (sc_rpc_msg_t *) data; + uint8_t count = 0; + + /* Check size */ + if (msg->size > SC_RPC_MAX_MSG) + return; + + /* Write first word */ + mu_send_msg(sc_ipc->mu_base, 0, *((uint32_t *) msg)); + count++; .. in this loop you are writing to one channel/register per loop. If the communicate will stall for some reason, the linux system will just freeze here without any timeout or error message.. no idea how about the opposite site. + /* Write remaining words */ + while (count < msg->size) { + mu_send_msg(sc_ipc->mu_base, count % MU_TR_COUNT, + msg->DATA.u32[count - 1]); + count++; + } +} ... and here is a proof that sc_ipc_write will do in some cases 5 rounds (5 * 4 bytes = 20 bytes single message) with probable busy waiting for each channel +sc_err_t sc_misc_seco_image_load(sc_ipc_t ipc, uint32_t addr_src, + uint32_t addr_dst, uint32_t len, bool fw) +{ + sc_rpc_msg_t msg; + uint8_t result; + + RPC_VER(&msg) = SC_RPC_VERSION; + RPC_SVC(&msg) = (uint8_t)SC_RPC_SVC_MISC; + RPC_FUNC(&msg) = (uint8_t)MISC_FUNC_SECO_IMAGE_LOAD; + RPC_U32(&msg, 0) = addr_src; + RPC_U32(&msg, 4) = addr_dst; + RPC_U32(&msg, 8) = len; + RPC_U8(&msg, 12) = (uint8_t)fw; + RPC_SIZE(&msg) = 5; + + sc_call_rpc(ipc, &msg, false); + + result = RPC_R8(&msg); + return (sc_err_t)result; +} + So, the same code with mailbox framework will be some thing like this: 1. request all 4 channels in the probe. ignore completion callback and set proper timeout. 2. keep your old code by replacing this part. /* Write remaining words */ while (count < msg->size) { mbox_send_message(sc_ipc->mbox_chan[count % MU_TR_COUNT], msg->DATA.u32[count - 1]); count++; } The advantage of this variant. If SCU firmware will stall, the linux will be able to notify about it without blocking complete system. Can you please provide (if possible) your old mailbox based implementation. I'm curious to see why it is slow.
> -----Original Message----- > From: Oleksij Rempel [mailto:o.rempel@pengutronix.de] > Sent: Friday, June 22, 2018 2:09 AM > To: A.s. Dong <aisheng.dong@nxp.com> > Cc: Sascha Hauer <s.hauer@pengutronix.de>; Rob Herring > <robh@kernel.org>; Mark Rutland <mark.rutland@arm.com>; > devicetree@vger.kernel.org; dongas86@gmail.com; dl-linux-imx <linux- > imx@nxp.com>; kernel@pengutronix.de; Fabio Estevam > <fabio.estevam@nxp.com>; shawnguo@kernel.org; linux-arm- > kernel@lists.infradead.org > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding doc > > Hi, > > On Thu, Jun 21, 2018 at 05:11:33PM +0000, A.s. Dong wrote: > > Hi Sascha, > > > On Wed, Jun 20, 2018 at 01:43:10PM -0600, Rob Herring wrote: > > > > On Sun, Jun 17, 2018 at 08:49:47PM +0800, Dong Aisheng wrote: > > > > > The Messaging Unit module enables two processors within the SoC > > > > > to communicate and coordinate by passing messages (e.g. data, > > > > > status and control) through the MU interface. > > > > > > > > > > --- > > > > > v1->v2: > > > > > * typo fixes > > > > > * remove status property > > > > > * remove imx6&7 compatible string which may be added later for > > > > > the generic mailbox binding > > > > > > > > > > Note: Because MU used by SCU is not implemented as a mailbox > > > > > driver, Instead, they're provided in library calls to gain higher > performance. > > > > > > > > Using a binding doesn't mean you have to use an OS's subsystem. > > > > > > > > What needs higher performance? What's the performance difference? > > > Why > > > > can't the mailbox framework be improved? > > > > > > From what I see the performance is improved by polling the interrupt > > > registers rather than using interrupts. > > > I see no reason though why this can't be implemented with the > > > mailbox framework as is. > > > > > > > I thought you've agreed to not write generic MU(mailbox) driver for SCU. > > https://www.spinics.net/lists/arm-kernel/msg650217.html > > But seems it's still not quite certain... > > > > I'd like to explain some more. > > > > 1) the interrupt mechanism is not quite suitable for SCU firmware > > protocol as the transfer size would be more than 4 words and the > > response data size is also undetermined (it's set by SCU firmware side > during a response). > > So polling mode may be the best way to handle this as MU message > > handling usually is quite fast in a few microseconds. > > > > 2) It's true that Mailbox framework is well designed and powerful. > > But it's not quite suitable for SCU MU as we don't need to use the > > most bits of it. Mailbox seems like to be more suitable for a generic > > MU mailbox driver used by various clients/servers. But SCU MU are > > quite specific to SCU protocol and can't be used by other clients (MU > > 0~4 is fixed for SCU communication in MX8 HW design). > > Even we write a MU Mailbox driver for SCU MU, it's still not a general > > one and can't be used by others (e.g. communication with M4). > > So I'd believe the current library way is still the best approach for > > SCU MU Using. But I'm also okay for another generic MU drivers for > > other common communications between A core and M4 side. > > > > 3) We actually have tried the MU(Mailbox) internally, it increased a > > lot complexity comparing to the current library way and got a booting > > time regression issue due to extra delays introduced in handling SCU > > protocol in mailbox way. > > > > And finally a nature question to us is: > > What the benefit we can get for SCU MU using a mailbox way? > > > > If we can't find benefits but introduce more complexities then why we > > would do that way? > > Looks like my response to same topic within my patch set is lost, so I repost it > here: > > ok.. let's take some of IMX8 SCU driver code to see if there any difference: > > ..this part of the code is blocking write procedure for one channeler (register > or what ever name you prefer) per write.. correct? > > +void mu_send_msg(struct mu_priv *priv, uint32_t index, uint32_t msg) { > + uint32_t mask = MU_SR_TE0_MASK >> index; > + > + /* Wait TX register to be empty. */ > + while (!(readl_relaxed(priv->base + MU_ASR) & mask)) > + ; > + writel_relaxed(msg, priv->base + MU_ATR0 + (index * 4)); } > +EXPORT_SYMBOL_GPL(mu_send_msg); > > According to documentation it is recommended to use only one status bit for > the last register to use MU as one big 4words sized pipe. > But, there is no way you can write to all 4 registers without checking status > for each of this register, because your protocol has dynamic message size. So > you are forced to use your one channel as 4 separate channels. > Write it part of the message separately and allow your firmware read 1 word > to understand how to behave on the rest of the message. > > +static void sc_ipc_write(struct sc_ipc *sc_ipc, void *data) { > + sc_rpc_msg_t *msg = (sc_rpc_msg_t *) data; > + uint8_t count = 0; > + > + /* Check size */ > + if (msg->size > SC_RPC_MAX_MSG) > + return; > + > + /* Write first word */ > + mu_send_msg(sc_ipc->mu_base, 0, *((uint32_t *) msg)); > + count++; > > .. in this loop you are writing to one channel/register per loop. If the > communicate will stall for some reason, the linux system will just freeze here > without any timeout or error message.. no idea how about the opposite site. > > + /* Write remaining words */ > + while (count < msg->size) { > + mu_send_msg(sc_ipc->mu_base, count % MU_TR_COUNT, > + msg->DATA.u32[count - 1]); > + count++; > + } > +} > > > ... and here is a proof that sc_ipc_write will do in some cases 5 rounds > (5 * 4 bytes = 20 bytes single message) with probable busy waiting for each > channel > > +sc_err_t sc_misc_seco_image_load(sc_ipc_t ipc, uint32_t addr_src, > + uint32_t addr_dst, uint32_t len, bool fw) { > + sc_rpc_msg_t msg; > + uint8_t result; > + > + RPC_VER(&msg) = SC_RPC_VERSION; > + RPC_SVC(&msg) = (uint8_t)SC_RPC_SVC_MISC; > + RPC_FUNC(&msg) = (uint8_t)MISC_FUNC_SECO_IMAGE_LOAD; > + RPC_U32(&msg, 0) = addr_src; > + RPC_U32(&msg, 4) = addr_dst; > + RPC_U32(&msg, 8) = len; > + RPC_U8(&msg, 12) = (uint8_t)fw; > + RPC_SIZE(&msg) = 5; > + > + sc_call_rpc(ipc, &msg, false); > + > + result = RPC_R8(&msg); > + return (sc_err_t)result; > +} > + > > So, the same code with mailbox framework will be some thing like this: > 1. request all 4 channels in the probe. ignore completion callback and set > proper timeout. > That looks a bit strange. As I said in another email, MU physical does not have multi Channels (here you mean are virtual channels). And one whole MU instance is Exclusively used by SCU, why we need abstract them into 4 channels to use separately with extra unnecessary resource hold and code path executed. > 2. keep your old code by replacing this part. > /* Write remaining words */ > while (count < msg->size) { > mbox_send_message(sc_ipc->mbox_chan[count % > MU_TR_COUNT], > msg->DATA.u32[count - 1]); > count++; > } > > The advantage of this variant. If SCU firmware will stall, the linux will be able > to notify about it without blocking complete system. > This part of code has been used for a long time and we've never met the stall Issue which means SCU firmware guarantee it well. But I agree a timeout mechanism Is better. However, if only for this reason, we can simply add a timeout mechanism in MU library function as well, but still is far from a strong enough reason to switch to a more complexed mailbox one. > Can you please provide (if possible) your old mailbox based implementation. > I'm curious to see why it is slow. In our implementation: 1) One channel per MU 2) Tx using the same way to send msg as sc_ipc_write() in polling mode 3) Rx enables the first word interrupt and polling for the rest of them in a hrtimer. The possible extra cost comparing to simple polling way: 1) Extra unnecessary code execution path of mailbox which is not used by SCU MU 2) Interrupt latency 3) Extra memory copy handling RX message separately. 4) Extra schedule of hrtimer polling Some of them probably could be optimized. However, besides the slow problem, the extra unnecessary complexity and can't be generic (specific to SCU) are also important ones. And the MU general purpose interrupt feature and general purpose flags feature may also not supported by mailbox well. Regards Dong Aisheng > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 22, 2018 at 03:31:11AM +0000, A.s. Dong wrote: > > -----Original Message----- > > From: Oleksij Rempel [mailto:o.rempel@pengutronix.de] > > Sent: Friday, June 22, 2018 2:09 AM > > To: A.s. Dong <aisheng.dong@nxp.com> > > Cc: Sascha Hauer <s.hauer@pengutronix.de>; Rob Herring > > <robh@kernel.org>; Mark Rutland <mark.rutland@arm.com>; > > devicetree@vger.kernel.org; dongas86@gmail.com; dl-linux-imx <linux- > > imx@nxp.com>; kernel@pengutronix.de; Fabio Estevam > > <fabio.estevam@nxp.com>; shawnguo@kernel.org; linux-arm- > > kernel@lists.infradead.org > > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding doc > > > > Hi, > > > > On Thu, Jun 21, 2018 at 05:11:33PM +0000, A.s. Dong wrote: > > > Hi Sascha, > > > > On Wed, Jun 20, 2018 at 01:43:10PM -0600, Rob Herring wrote: > > > > > On Sun, Jun 17, 2018 at 08:49:47PM +0800, Dong Aisheng wrote: > > > > > > The Messaging Unit module enables two processors within the SoC > > > > > > to communicate and coordinate by passing messages (e.g. data, > > > > > > status and control) through the MU interface. > > > > > > > > > > > > --- > > > > > > v1->v2: > > > > > > * typo fixes > > > > > > * remove status property > > > > > > * remove imx6&7 compatible string which may be added later for > > > > > > the generic mailbox binding > > > > > > > > > > > > Note: Because MU used by SCU is not implemented as a mailbox > > > > > > driver, Instead, they're provided in library calls to gain higher > > performance. > > > > > > > > > > Using a binding doesn't mean you have to use an OS's subsystem. > > > > > > > > > > What needs higher performance? What's the performance difference? > > > > Why > > > > > can't the mailbox framework be improved? > > > > > > > > From what I see the performance is improved by polling the interrupt > > > > registers rather than using interrupts. > > > > I see no reason though why this can't be implemented with the > > > > mailbox framework as is. > > > > > > > > > > I thought you've agreed to not write generic MU(mailbox) driver for SCU. > > > https://www.spinics.net/lists/arm-kernel/msg650217.html > > > But seems it's still not quite certain... > > > > > > I'd like to explain some more. > > > > > > 1) the interrupt mechanism is not quite suitable for SCU firmware > > > protocol as the transfer size would be more than 4 words and the > > > response data size is also undetermined (it's set by SCU firmware side > > during a response). > > > So polling mode may be the best way to handle this as MU message > > > handling usually is quite fast in a few microseconds. > > > > > > 2) It's true that Mailbox framework is well designed and powerful. > > > But it's not quite suitable for SCU MU as we don't need to use the > > > most bits of it. Mailbox seems like to be more suitable for a generic > > > MU mailbox driver used by various clients/servers. But SCU MU are > > > quite specific to SCU protocol and can't be used by other clients (MU > > > 0~4 is fixed for SCU communication in MX8 HW design). > > > Even we write a MU Mailbox driver for SCU MU, it's still not a general > > > one and can't be used by others (e.g. communication with M4). > > > So I'd believe the current library way is still the best approach for > > > SCU MU Using. But I'm also okay for another generic MU drivers for > > > other common communications between A core and M4 side. > > > > > > 3) We actually have tried the MU(Mailbox) internally, it increased a > > > lot complexity comparing to the current library way and got a booting > > > time regression issue due to extra delays introduced in handling SCU > > > protocol in mailbox way. > > > > > > And finally a nature question to us is: > > > What the benefit we can get for SCU MU using a mailbox way? > > > > > > If we can't find benefits but introduce more complexities then why we > > > would do that way? > > > > Looks like my response to same topic within my patch set is lost, so I repost it > > here: > > > > ok.. let's take some of IMX8 SCU driver code to see if there any difference: > > > > ..this part of the code is blocking write procedure for one channeler (register > > or what ever name you prefer) per write.. correct? > > > > +void mu_send_msg(struct mu_priv *priv, uint32_t index, uint32_t msg) { > > + uint32_t mask = MU_SR_TE0_MASK >> index; > > + > > + /* Wait TX register to be empty. */ > > + while (!(readl_relaxed(priv->base + MU_ASR) & mask)) > > + ; > > + writel_relaxed(msg, priv->base + MU_ATR0 + (index * 4)); } > > +EXPORT_SYMBOL_GPL(mu_send_msg); > > > > According to documentation it is recommended to use only one status bit for > > the last register to use MU as one big 4words sized pipe. > > But, there is no way you can write to all 4 registers without checking status > > for each of this register, because your protocol has dynamic message size. So > > you are forced to use your one channel as 4 separate channels. > > Write it part of the message separately and allow your firmware read 1 word > > to understand how to behave on the rest of the message. > > > > +static void sc_ipc_write(struct sc_ipc *sc_ipc, void *data) { > > + sc_rpc_msg_t *msg = (sc_rpc_msg_t *) data; > > + uint8_t count = 0; > > + > > + /* Check size */ > > + if (msg->size > SC_RPC_MAX_MSG) > > + return; > > + > > + /* Write first word */ > > + mu_send_msg(sc_ipc->mu_base, 0, *((uint32_t *) msg)); > > + count++; > > > > .. in this loop you are writing to one channel/register per loop. If the > > communicate will stall for some reason, the linux system will just freeze here > > without any timeout or error message.. no idea how about the opposite site. > > > > + /* Write remaining words */ > > + while (count < msg->size) { > > + mu_send_msg(sc_ipc->mu_base, count % MU_TR_COUNT, > > + msg->DATA.u32[count - 1]); > > + count++; > > + } > > +} > > > > > > ... and here is a proof that sc_ipc_write will do in some cases 5 rounds > > (5 * 4 bytes = 20 bytes single message) with probable busy waiting for each > > channel > > > > +sc_err_t sc_misc_seco_image_load(sc_ipc_t ipc, uint32_t addr_src, > > + uint32_t addr_dst, uint32_t len, bool fw) { > > + sc_rpc_msg_t msg; > > + uint8_t result; > > + > > + RPC_VER(&msg) = SC_RPC_VERSION; > > + RPC_SVC(&msg) = (uint8_t)SC_RPC_SVC_MISC; > > + RPC_FUNC(&msg) = (uint8_t)MISC_FUNC_SECO_IMAGE_LOAD; > > + RPC_U32(&msg, 0) = addr_src; > > + RPC_U32(&msg, 4) = addr_dst; > > + RPC_U32(&msg, 8) = len; > > + RPC_U8(&msg, 12) = (uint8_t)fw; > > + RPC_SIZE(&msg) = 5; > > + > > + sc_call_rpc(ipc, &msg, false); > > + > > + result = RPC_R8(&msg); > > + return (sc_err_t)result; > > +} > > + > > > > So, the same code with mailbox framework will be some thing like this: > > 1. request all 4 channels in the probe. ignore completion callback and set > > proper timeout. > > > > That looks a bit strange. As I said in another email, MU physical does not have multi > Channels (here you mean are virtual channels). And one whole MU instance is > Exclusively used by SCU, why we need abstract them into 4 channels to use separately > with extra unnecessary resource hold and code path executed. OK, so this MU should configured to use all 4 registers as one channel. I have nothing against it to do in generic driver. > > 2. keep your old code by replacing this part. > > /* Write remaining words */ > > while (count < msg->size) { > > mbox_send_message(sc_ipc->mbox_chan[count % > > MU_TR_COUNT], > > msg->DATA.u32[count - 1]); > > count++; > > } > > > > The advantage of this variant. If SCU firmware will stall, the linux will be able > > to notify about it without blocking complete system. > > > > This part of code has been used for a long time and we've never met the stall > Issue which means SCU firmware guarantee it well. But I agree a timeout > mechanism Is better. However, if only for this reason, we can simply add a > timeout mechanism in MU library function as well, but still is far from a strong > enough reason to switch to a more complexed mailbox one. At this point a have absolutely zero tolerance. At the end I was one on poor devs hunting similar kind of stalls. Believe me, what can theoretically with 1% probability happen in the lab, will end with days/months of bug hunting work and thousands of field returns. > > Can you please provide (if possible) your old mailbox based implementation. > > I'm curious to see why it is slow. > > In our implementation: > 1) One channel per MU > 2) Tx using the same way to send msg as sc_ipc_write() in polling mode > 3) Rx enables the first word interrupt and polling for the rest of them in > a hrtimer. > > The possible extra cost comparing to simple polling way: > 1) Extra unnecessary code execution path of mailbox which is not used by SCU MU > 2) Interrupt latency > 3) Extra memory copy handling RX message separately. > 4) Extra schedule of hrtimer polling > > Some of them probably could be optimized. However, besides the slow problem, > the extra unnecessary complexity and can't be generic (specific to SCU) are also > important ones. > > And the MU general purpose interrupt feature and general purpose flags feature > may also not supported by mailbox well. Ok, I give up. Can we at least try to provide one device tree binding documentation for that? At the end, it is one and the same HW IP block spread in one SoC (or different SoCs) an be used in different way. How exactly it will be used is the choice of the developer/customer/user... even if it will be described withing mailbox section dos not mean you are forced to use mailbox framework. Lets imagine worst case scenario and all of MU on i.MX8 are used by different drivers. In my mailbox binding I suggest to use <vendor>,<soc>-mu-<mu side>. On i.MX7 there is only one MU, so it looks like "fsl,imx7s-mu-a" and "fsl,imx7s-mu-b". i.MX8 has multiple MU so it should be enumerated. Probably it will look like: "fsl,imx8x-mu0-a". Do it make sense for you? Can we find and agreement here? :)
On Thu, Jun 21, 2018 at 05:11:33PM +0000, A.s. Dong wrote: > Hi Sascha, > > > -----Original Message----- > > From: Sascha Hauer [mailto:s.hauer@pengutronix.de] > > Sent: Thursday, June 21, 2018 3:47 PM > > To: Rob Herring <robh@kernel.org> > > Cc: A.s. Dong <aisheng.dong@nxp.com>; linux-arm- > > kernel@lists.infradead.org; dongas86@gmail.com; kernel@pengutronix.de; > > shawnguo@kernel.org; Fabio Estevam <fabio.estevam@nxp.com>; dl-linux- > > imx <linux-imx@nxp.com>; Mark Rutland <mark.rutland@arm.com>; > > devicetree@vger.kernel.org > > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding doc > > > > On Wed, Jun 20, 2018 at 01:43:10PM -0600, Rob Herring wrote: > > > On Sun, Jun 17, 2018 at 08:49:47PM +0800, Dong Aisheng wrote: > > > > The Messaging Unit module enables two processors within the SoC to > > > > communicate and coordinate by passing messages (e.g. data, status > > > > and control) through the MU interface. > > > > > > > > Cc: Shawn Guo <shawnguo@kernel.org> > > > > Cc: Sascha Hauer <kernel@pengutronix.de> > > > > Cc: Fabio Estevam <fabio.estevam@nxp.com> > > > > Cc: Rob Herring <robh+dt@kernel.org> > > > > Cc: Mark Rutland <mark.rutland@arm.com> > > > > Cc: devicetree@vger.kernel.org > > > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > > > > --- > > > > v1->v2: > > > > * typo fixes > > > > * remove status property > > > > * remove imx6&7 compatible string which may be added later for > > > > the generic mailbox binding > > > > > > > > Note: Because MU used by SCU is not implemented as a mailbox driver, > > > > Instead, they're provided in library calls to gain higher performance. > > > > > > Using a binding doesn't mean you have to use an OS's subsystem. > > > > > > What needs higher performance? What's the performance difference? > > Why > > > can't the mailbox framework be improved? > > > > From what I see the performance is improved by polling the interrupt > > registers rather than using interrupts. > > I see no reason though why this can't be implemented with the mailbox > > framework as is. > > > > I thought you've agreed to not write generic MU(mailbox) driver for SCU. > https://www.spinics.net/lists/arm-kernel/msg650217.html > But seems it's still not quite certain... My suggestion was that we change the compatible of the MU unit to something that the SCU driver matches. But since we do not do that and instead use a fsl,imx8qxp-mu compatible for the MU we have to come up with a MU driver that handles both the SCU case and the regular usecase. Otherwise we'll end up with a generic driver attaching to the device you are using under the hoods. Sascha
Hi Oleksij, > -----Original Message----- > From: Oleksij Rempel [mailto:o.rempel@pengutronix.de] > Sent: Friday, June 22, 2018 12:59 PM > To: A.s. Dong <aisheng.dong@nxp.com> > Cc: Sascha Hauer <s.hauer@pengutronix.de>; Rob Herring > <robh@kernel.org>; Mark Rutland <mark.rutland@arm.com>; > devicetree@vger.kernel.org; dongas86@gmail.com; dl-linux-imx <linux- > imx@nxp.com>; kernel@pengutronix.de; Fabio Estevam > <fabio.estevam@nxp.com>; shawnguo@kernel.org; linux-arm- > kernel@lists.infradead.org > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding doc > > On Fri, Jun 22, 2018 at 03:31:11AM +0000, A.s. Dong wrote: > > > -----Original Message----- > > > From: Oleksij Rempel [mailto:o.rempel@pengutronix.de] > > > Sent: Friday, June 22, 2018 2:09 AM > > > To: A.s. Dong <aisheng.dong@nxp.com> > > > Cc: Sascha Hauer <s.hauer@pengutronix.de>; Rob Herring > > > <robh@kernel.org>; Mark Rutland <mark.rutland@arm.com>; > > > devicetree@vger.kernel.org; dongas86@gmail.com; dl-linux-imx <linux- > > > imx@nxp.com>; kernel@pengutronix.de; Fabio Estevam > > > <fabio.estevam@nxp.com>; shawnguo@kernel.org; linux-arm- > > > kernel@lists.infradead.org > > > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding > > > doc > > > > > > Hi, > > > > > > On Thu, Jun 21, 2018 at 05:11:33PM +0000, A.s. Dong wrote: > > > > Hi Sascha, > > > > > On Wed, Jun 20, 2018 at 01:43:10PM -0600, Rob Herring wrote: > > > > > > On Sun, Jun 17, 2018 at 08:49:47PM +0800, Dong Aisheng wrote: > > > > > > > The Messaging Unit module enables two processors within the > > > > > > > SoC to communicate and coordinate by passing messages (e.g. > > > > > > > data, status and control) through the MU interface. > > > > > > > > > > > > > > --- > > > > > > > v1->v2: > > > > > > > * typo fixes > > > > > > > * remove status property > > > > > > > * remove imx6&7 compatible string which may be added later for > > > > > > > the generic mailbox binding > > > > > > > > > > > > > > Note: Because MU used by SCU is not implemented as a mailbox > > > > > > > driver, Instead, they're provided in library calls to gain > > > > > > > higher > > > performance. > > > > > > > > > > > > Using a binding doesn't mean you have to use an OS's subsystem. > > > > > > > > > > > > What needs higher performance? What's the performance > difference? > > > > > Why > > > > > > can't the mailbox framework be improved? > > > > > > > > > > From what I see the performance is improved by polling the > > > > > interrupt registers rather than using interrupts. > > > > > I see no reason though why this can't be implemented with the > > > > > mailbox framework as is. > > > > > > > > > > > > > I thought you've agreed to not write generic MU(mailbox) driver for > SCU. > > > > https://www.spinics.net/lists/arm-kernel/msg650217.html > > > > But seems it's still not quite certain... > > > > > > > > I'd like to explain some more. > > > > > > > > 1) the interrupt mechanism is not quite suitable for SCU firmware > > > > protocol as the transfer size would be more than 4 words and the > > > > response data size is also undetermined (it's set by SCU firmware > > > > side > > > during a response). > > > > So polling mode may be the best way to handle this as MU message > > > > handling usually is quite fast in a few microseconds. > > > > > > > > 2) It's true that Mailbox framework is well designed and powerful. > > > > But it's not quite suitable for SCU MU as we don't need to use the > > > > most bits of it. Mailbox seems like to be more suitable for a > > > > generic MU mailbox driver used by various clients/servers. But > > > > SCU MU are quite specific to SCU protocol and can't be used by > > > > other clients (MU > > > > 0~4 is fixed for SCU communication in MX8 HW design). > > > > Even we write a MU Mailbox driver for SCU MU, it's still not a > > > > general one and can't be used by others (e.g. communication with M4). > > > > So I'd believe the current library way is still the best approach > > > > for SCU MU Using. But I'm also okay for another generic MU drivers > > > > for other common communications between A core and M4 side. > > > > > > > > 3) We actually have tried the MU(Mailbox) internally, it increased > > > > a lot complexity comparing to the current library way and got a > > > > booting time regression issue due to extra delays introduced in > > > > handling SCU protocol in mailbox way. > > > > > > > > And finally a nature question to us is: > > > > What the benefit we can get for SCU MU using a mailbox way? > > > > > > > > If we can't find benefits but introduce more complexities then why > > > > we would do that way? > > > > > > Looks like my response to same topic within my patch set is lost, so > > > I repost it > > > here: > > > > > > ok.. let's take some of IMX8 SCU driver code to see if there any > difference: > > > > > > ..this part of the code is blocking write procedure for one > > > channeler (register or what ever name you prefer) per write.. correct? > > > > > > +void mu_send_msg(struct mu_priv *priv, uint32_t index, uint32_t msg) > { > > > + uint32_t mask = MU_SR_TE0_MASK >> index; > > > + > > > + /* Wait TX register to be empty. */ > > > + while (!(readl_relaxed(priv->base + MU_ASR) & mask)) > > > + ; > > > + writel_relaxed(msg, priv->base + MU_ATR0 + (index * 4)); } > > > +EXPORT_SYMBOL_GPL(mu_send_msg); > > > > > > According to documentation it is recommended to use only one status > > > bit for the last register to use MU as one big 4words sized pipe. > > > But, there is no way you can write to all 4 registers without > > > checking status for each of this register, because your protocol has > > > dynamic message size. So you are forced to use your one channel as 4 > separate channels. > > > Write it part of the message separately and allow your firmware read > > > 1 word to understand how to behave on the rest of the message. > > > > > > +static void sc_ipc_write(struct sc_ipc *sc_ipc, void *data) { > > > + sc_rpc_msg_t *msg = (sc_rpc_msg_t *) data; > > > + uint8_t count = 0; > > > + > > > + /* Check size */ > > > + if (msg->size > SC_RPC_MAX_MSG) > > > + return; > > > + > > > + /* Write first word */ > > > + mu_send_msg(sc_ipc->mu_base, 0, *((uint32_t *) msg)); > > > + count++; > > > > > > .. in this loop you are writing to one channel/register per loop. If > > > the communicate will stall for some reason, the linux system will > > > just freeze here without any timeout or error message.. no idea how > about the opposite site. > > > > > > + /* Write remaining words */ > > > + while (count < msg->size) { > > > + mu_send_msg(sc_ipc->mu_base, count % MU_TR_COUNT, > > > + msg->DATA.u32[count - 1]); > > > + count++; > > > + } > > > +} > > > > > > > > > ... and here is a proof that sc_ipc_write will do in some cases 5 > > > rounds > > > (5 * 4 bytes = 20 bytes single message) with probable busy waiting > > > for each channel > > > > > > +sc_err_t sc_misc_seco_image_load(sc_ipc_t ipc, uint32_t addr_src, > > > + uint32_t addr_dst, uint32_t len, bool fw) { > > > + sc_rpc_msg_t msg; > > > + uint8_t result; > > > + > > > + RPC_VER(&msg) = SC_RPC_VERSION; > > > + RPC_SVC(&msg) = (uint8_t)SC_RPC_SVC_MISC; > > > + RPC_FUNC(&msg) = (uint8_t)MISC_FUNC_SECO_IMAGE_LOAD; > > > + RPC_U32(&msg, 0) = addr_src; > > > + RPC_U32(&msg, 4) = addr_dst; > > > + RPC_U32(&msg, 8) = len; > > > + RPC_U8(&msg, 12) = (uint8_t)fw; > > > + RPC_SIZE(&msg) = 5; > > > + > > > + sc_call_rpc(ipc, &msg, false); > > > + > > > + result = RPC_R8(&msg); > > > + return (sc_err_t)result; > > > +} > > > + > > > > > > So, the same code with mailbox framework will be some thing like this: > > > 1. request all 4 channels in the probe. ignore completion callback > > > and set proper timeout. > > > > > > > That looks a bit strange. As I said in another email, MU physical does > > not have multi Channels (here you mean are virtual channels). And one > > whole MU instance is Exclusively used by SCU, why we need abstract > > them into 4 channels to use separately with extra unnecessary resource > hold and code path executed. > > OK, so this MU should configured to use all 4 registers as one channel. > I have nothing against it to do in generic driver. > > > > 2. keep your old code by replacing this part. > > > /* Write remaining words */ > > > while (count < msg->size) { > > > mbox_send_message(sc_ipc->mbox_chan[count % > MU_TR_COUNT], > > > msg->DATA.u32[count - 1]); > > > count++; > > > } > > > > > > The advantage of this variant. If SCU firmware will stall, the linux > > > will be able to notify about it without blocking complete system. > > > > > > > This part of code has been used for a long time and we've never met > > the stall Issue which means SCU firmware guarantee it well. But I > > agree a timeout mechanism Is better. However, if only for this > > reason, we can simply add a timeout mechanism in MU library function > > as well, but still is far from a strong enough reason to switch to a more > complexed mailbox one. > > At this point a have absolutely zero tolerance. At the end I was one on poor > devs hunting similar kind of stalls. > Believe me, what can theoretically with 1% probability happen in the lab, will > end with days/months of bug hunting work and thousands of field returns. > Yeah, so I think a timeout mechanism is worthy to add. > > > Can you please provide (if possible) your old mailbox based > implementation. > > > I'm curious to see why it is slow. > > > > In our implementation: > > 1) One channel per MU > > 2) Tx using the same way to send msg as sc_ipc_write() in polling mode > > 3) Rx enables the first word interrupt and polling for the rest of > > them in a hrtimer. > > > > The possible extra cost comparing to simple polling way: > > 1) Extra unnecessary code execution path of mailbox which is not used > > by SCU MU > > 2) Interrupt latency > > 3) Extra memory copy handling RX message separately. > > 4) Extra schedule of hrtimer polling > > > > Some of them probably could be optimized. However, besides the slow > > problem, the extra unnecessary complexity and can't be generic > > (specific to SCU) are also important ones. > > > > And the MU general purpose interrupt feature and general purpose flags > > feature may also not supported by mailbox well. > > Ok, I give up. > Can we at least try to provide one device tree binding documentation for > that? I will update the binding doc to use mailbox way as suggested by Rob. But I still need to change mbox-cells to allow 0 which actually already exist In kernel. So we may have too options for MU binding for users. For SCU MU, mbox-cells = <0> For General MU, mbox-cells = <1> > At the end, it is one and the same HW IP block spread in one SoC (or > different SoCs) an be used in different way. How exactly it will be used is the > choice of the developer/customer/user... > even if it will be described withing mailbox section dos not mean you are > forced to use mailbox framework. > > Lets imagine worst case scenario and all of MU on i.MX8 are used by > different drivers. In my mailbox binding I suggest to use <vendor>,<soc>- > mu-<mu side>. On i.MX7 there is only one MU, so it looks like "fsl,imx7s-mu- > a" and "fsl,imx7s-mu-b". i.MX8 has multiple MU so it should be enumerated. > Probably it will look like: "fsl,imx8x-mu0-a". > Do it make sense for you? Can we find and agreement here? :) > IMHO one possible concern may be that results in creating two much compatibles strings. For example, each SoC have two (fsl, <soc>-mu-<a or b>). Now with MU supported SoCs, we have mx6sx, mx7ulp, Mx7d, mx8qm, mx8x, mx8mq and etc... My question is that if it's really worthy to create a separate side b compatible string instread of distinguish it by a property? And for general purpose MUs to communicate with M4. Both side can be used by either A core and M core. If we're doing this way, once users wants A core to access B side, users need to change the compatible string, that seems more like an unusual way compared to changing properties. How do you think? Regards Dong Aisheng > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> -----Original Message----- > From: Sascha Hauer [mailto:s.hauer@pengutronix.de] > Sent: Friday, June 22, 2018 1:50 PM > To: A.s. Dong <aisheng.dong@nxp.com> > Cc: Rob Herring <robh@kernel.org>; linux-arm-kernel@lists.infradead.org; > dongas86@gmail.com; kernel@pengutronix.de; shawnguo@kernel.org; > Fabio Estevam <fabio.estevam@nxp.com>; dl-linux-imx <linux- > imx@nxp.com>; Mark Rutland <mark.rutland@arm.com>; > devicetree@vger.kernel.org > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding doc > > On Thu, Jun 21, 2018 at 05:11:33PM +0000, A.s. Dong wrote: > > Hi Sascha, > > > > > -----Original Message----- > > > From: Sascha Hauer [mailto:s.hauer@pengutronix.de] > > > Sent: Thursday, June 21, 2018 3:47 PM > > > To: Rob Herring <robh@kernel.org> > > > Cc: A.s. Dong <aisheng.dong@nxp.com>; linux-arm- > > > kernel@lists.infradead.org; dongas86@gmail.com; > > > kernel@pengutronix.de; shawnguo@kernel.org; Fabio Estevam > > > <fabio.estevam@nxp.com>; dl-linux- imx <linux-imx@nxp.com>; Mark > > > Rutland <mark.rutland@arm.com>; devicetree@vger.kernel.org > > > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding > > > doc > > > > > > On Wed, Jun 20, 2018 at 01:43:10PM -0600, Rob Herring wrote: > > > > On Sun, Jun 17, 2018 at 08:49:47PM +0800, Dong Aisheng wrote: > > > > > The Messaging Unit module enables two processors within the SoC > > > > > to communicate and coordinate by passing messages (e.g. data, > > > > > status and control) through the MU interface. > > > > > > > > > > Cc: Shawn Guo <shawnguo@kernel.org> > > > > > Cc: Sascha Hauer <kernel@pengutronix.de> > > > > > Cc: Fabio Estevam <fabio.estevam@nxp.com> > > > > > Cc: Rob Herring <robh+dt@kernel.org> > > > > > Cc: Mark Rutland <mark.rutland@arm.com> > > > > > Cc: devicetree@vger.kernel.org > > > > > Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> > > > > > --- > > > > > v1->v2: > > > > > * typo fixes > > > > > * remove status property > > > > > * remove imx6&7 compatible string which may be added later for > > > > > the generic mailbox binding > > > > > > > > > > Note: Because MU used by SCU is not implemented as a mailbox > > > > > driver, Instead, they're provided in library calls to gain higher > performance. > > > > > > > > Using a binding doesn't mean you have to use an OS's subsystem. > > > > > > > > What needs higher performance? What's the performance difference? > > > Why > > > > can't the mailbox framework be improved? > > > > > > From what I see the performance is improved by polling the interrupt > > > registers rather than using interrupts. > > > I see no reason though why this can't be implemented with the > > > mailbox framework as is. > > > > > > > I thought you've agreed to not write generic MU(mailbox) driver for SCU. > > > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fw > ww > > .spinics.net%2Flists%2Farm- > kernel%2Fmsg650217.html&data=02%7C01%7Caish > > > eng.dong%40nxp.com%7Cfb1c9e5d6eff453207a908d5d803f139%7C686ea1d3 > bc2b4c > > > 6fa92cd99c5c301635%7C0%7C0%7C636652433808619368&sdata=vOFbr%2BSJ > 1tkY5F > > 8ha1wrxk3RMVxI4lzKkidD9cK%2Bl9A%3D&reserved=0 > > But seems it's still not quite certain... > > My suggestion was that we change the compatible of the MU unit to > something that the SCU driver matches. But since we do not do that and > instead use a fsl,imx8qxp-mu compatible for the MU we have to come up > with a MU driver that handles both the SCU case and the regular usecase. > Otherwise we'll end up with a generic driver attaching to the device you are > using under the hoods. > Do you think checking mbox-cells can work? E.g. SCU MU mbox-cells should be 0 while general purpose MU are 1. Regards Dong Aisheng > Sascha > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | > https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fww > w.pengutronix.de%2F&data=02%7C01%7Caisheng.dong%40nxp.com%7Cfb1 > c9e5d6eff453207a908d5d803f139%7C686ea1d3bc2b4c6fa92cd99c5c301635%7 > C0%7C0%7C636652433808619368&sdata=AYkDI3ubpKuxfKvmsvM8d65suEAkf > 3h9Tq5KZdJxoNY%3D&reserved=0 | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jun 22, 2018 at 05:59:30AM +0000, A.s. Dong wrote: > Hi Oleksij, > > > -----Original Message----- > > From: Oleksij Rempel [mailto:o.rempel@pengutronix.de] > > Sent: Friday, June 22, 2018 12:59 PM > > To: A.s. Dong <aisheng.dong@nxp.com> > > Cc: Sascha Hauer <s.hauer@pengutronix.de>; Rob Herring > > <robh@kernel.org>; Mark Rutland <mark.rutland@arm.com>; > > devicetree@vger.kernel.org; dongas86@gmail.com; dl-linux-imx <linux- > > imx@nxp.com>; kernel@pengutronix.de; Fabio Estevam > > <fabio.estevam@nxp.com>; shawnguo@kernel.org; linux-arm- > > kernel@lists.infradead.org > > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding doc > > > > On Fri, Jun 22, 2018 at 03:31:11AM +0000, A.s. Dong wrote: > > > > -----Original Message----- > > > > From: Oleksij Rempel [mailto:o.rempel@pengutronix.de] > > > > Sent: Friday, June 22, 2018 2:09 AM > > > > To: A.s. Dong <aisheng.dong@nxp.com> > > > > Cc: Sascha Hauer <s.hauer@pengutronix.de>; Rob Herring > > > > <robh@kernel.org>; Mark Rutland <mark.rutland@arm.com>; > > > > devicetree@vger.kernel.org; dongas86@gmail.com; dl-linux-imx <linux- > > > > imx@nxp.com>; kernel@pengutronix.de; Fabio Estevam > > > > <fabio.estevam@nxp.com>; shawnguo@kernel.org; linux-arm- > > > > kernel@lists.infradead.org > > > > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding > > > > doc > > > > > > > > Hi, > > > > > > > > On Thu, Jun 21, 2018 at 05:11:33PM +0000, A.s. Dong wrote: > > > > > Hi Sascha, > > > > > > On Wed, Jun 20, 2018 at 01:43:10PM -0600, Rob Herring wrote: > > > > > > > On Sun, Jun 17, 2018 at 08:49:47PM +0800, Dong Aisheng wrote: > > > > > > > > The Messaging Unit module enables two processors within the > > > > > > > > SoC to communicate and coordinate by passing messages (e.g. > > > > > > > > data, status and control) through the MU interface. > > > > > > > > > > > > > > > > --- > > > > > > > > v1->v2: > > > > > > > > * typo fixes > > > > > > > > * remove status property > > > > > > > > * remove imx6&7 compatible string which may be added later for > > > > > > > > the generic mailbox binding > > > > > > > > > > > > > > > > Note: Because MU used by SCU is not implemented as a mailbox > > > > > > > > driver, Instead, they're provided in library calls to gain > > > > > > > > higher > > > > performance. > > > > > > > > > > > > > > Using a binding doesn't mean you have to use an OS's subsystem. > > > > > > > > > > > > > > What needs higher performance? What's the performance > > difference? > > > > > > Why > > > > > > > can't the mailbox framework be improved? > > > > > > > > > > > > From what I see the performance is improved by polling the > > > > > > interrupt registers rather than using interrupts. > > > > > > I see no reason though why this can't be implemented with the > > > > > > mailbox framework as is. > > > > > > > > > > > > > > > > I thought you've agreed to not write generic MU(mailbox) driver for > > SCU. > > > > > https://www.spinics.net/lists/arm-kernel/msg650217.html > > > > > But seems it's still not quite certain... > > > > > > > > > > I'd like to explain some more. > > > > > > > > > > 1) the interrupt mechanism is not quite suitable for SCU firmware > > > > > protocol as the transfer size would be more than 4 words and the > > > > > response data size is also undetermined (it's set by SCU firmware > > > > > side > > > > during a response). > > > > > So polling mode may be the best way to handle this as MU message > > > > > handling usually is quite fast in a few microseconds. > > > > > > > > > > 2) It's true that Mailbox framework is well designed and powerful. > > > > > But it's not quite suitable for SCU MU as we don't need to use the > > > > > most bits of it. Mailbox seems like to be more suitable for a > > > > > generic MU mailbox driver used by various clients/servers. But > > > > > SCU MU are quite specific to SCU protocol and can't be used by > > > > > other clients (MU > > > > > 0~4 is fixed for SCU communication in MX8 HW design). > > > > > Even we write a MU Mailbox driver for SCU MU, it's still not a > > > > > general one and can't be used by others (e.g. communication with M4). > > > > > So I'd believe the current library way is still the best approach > > > > > for SCU MU Using. But I'm also okay for another generic MU drivers > > > > > for other common communications between A core and M4 side. > > > > > > > > > > 3) We actually have tried the MU(Mailbox) internally, it increased > > > > > a lot complexity comparing to the current library way and got a > > > > > booting time regression issue due to extra delays introduced in > > > > > handling SCU protocol in mailbox way. > > > > > > > > > > And finally a nature question to us is: > > > > > What the benefit we can get for SCU MU using a mailbox way? > > > > > > > > > > If we can't find benefits but introduce more complexities then why > > > > > we would do that way? > > > > > > > > Looks like my response to same topic within my patch set is lost, so > > > > I repost it > > > > here: > > > > > > > > ok.. let's take some of IMX8 SCU driver code to see if there any > > difference: > > > > > > > > ..this part of the code is blocking write procedure for one > > > > channeler (register or what ever name you prefer) per write.. correct? > > > > > > > > +void mu_send_msg(struct mu_priv *priv, uint32_t index, uint32_t msg) > > { > > > > + uint32_t mask = MU_SR_TE0_MASK >> index; > > > > + > > > > + /* Wait TX register to be empty. */ > > > > + while (!(readl_relaxed(priv->base + MU_ASR) & mask)) > > > > + ; > > > > + writel_relaxed(msg, priv->base + MU_ATR0 + (index * 4)); } > > > > +EXPORT_SYMBOL_GPL(mu_send_msg); > > > > > > > > According to documentation it is recommended to use only one status > > > > bit for the last register to use MU as one big 4words sized pipe. > > > > But, there is no way you can write to all 4 registers without > > > > checking status for each of this register, because your protocol has > > > > dynamic message size. So you are forced to use your one channel as 4 > > separate channels. > > > > Write it part of the message separately and allow your firmware read > > > > 1 word to understand how to behave on the rest of the message. > > > > > > > > +static void sc_ipc_write(struct sc_ipc *sc_ipc, void *data) { > > > > + sc_rpc_msg_t *msg = (sc_rpc_msg_t *) data; > > > > + uint8_t count = 0; > > > > + > > > > + /* Check size */ > > > > + if (msg->size > SC_RPC_MAX_MSG) > > > > + return; > > > > + > > > > + /* Write first word */ > > > > + mu_send_msg(sc_ipc->mu_base, 0, *((uint32_t *) msg)); > > > > + count++; > > > > > > > > .. in this loop you are writing to one channel/register per loop. If > > > > the communicate will stall for some reason, the linux system will > > > > just freeze here without any timeout or error message.. no idea how > > about the opposite site. > > > > > > > > + /* Write remaining words */ > > > > + while (count < msg->size) { > > > > + mu_send_msg(sc_ipc->mu_base, count % MU_TR_COUNT, > > > > + msg->DATA.u32[count - 1]); > > > > + count++; > > > > + } > > > > +} > > > > > > > > > > > > ... and here is a proof that sc_ipc_write will do in some cases 5 > > > > rounds > > > > (5 * 4 bytes = 20 bytes single message) with probable busy waiting > > > > for each channel > > > > > > > > +sc_err_t sc_misc_seco_image_load(sc_ipc_t ipc, uint32_t addr_src, > > > > + uint32_t addr_dst, uint32_t len, bool fw) { > > > > + sc_rpc_msg_t msg; > > > > + uint8_t result; > > > > + > > > > + RPC_VER(&msg) = SC_RPC_VERSION; > > > > + RPC_SVC(&msg) = (uint8_t)SC_RPC_SVC_MISC; > > > > + RPC_FUNC(&msg) = (uint8_t)MISC_FUNC_SECO_IMAGE_LOAD; > > > > + RPC_U32(&msg, 0) = addr_src; > > > > + RPC_U32(&msg, 4) = addr_dst; > > > > + RPC_U32(&msg, 8) = len; > > > > + RPC_U8(&msg, 12) = (uint8_t)fw; > > > > + RPC_SIZE(&msg) = 5; > > > > + > > > > + sc_call_rpc(ipc, &msg, false); > > > > + > > > > + result = RPC_R8(&msg); > > > > + return (sc_err_t)result; > > > > +} > > > > + > > > > > > > > So, the same code with mailbox framework will be some thing like this: > > > > 1. request all 4 channels in the probe. ignore completion callback > > > > and set proper timeout. > > > > > > > > > > That looks a bit strange. As I said in another email, MU physical does > > > not have multi Channels (here you mean are virtual channels). And one > > > whole MU instance is Exclusively used by SCU, why we need abstract > > > them into 4 channels to use separately with extra unnecessary resource > > hold and code path executed. > > > > OK, so this MU should configured to use all 4 registers as one channel. > > I have nothing against it to do in generic driver. > > > > > > 2. keep your old code by replacing this part. > > > > /* Write remaining words */ > > > > while (count < msg->size) { > > > > mbox_send_message(sc_ipc->mbox_chan[count % > > MU_TR_COUNT], > > > > msg->DATA.u32[count - 1]); > > > > count++; > > > > } > > > > > > > > The advantage of this variant. If SCU firmware will stall, the linux > > > > will be able to notify about it without blocking complete system. > > > > > > > > > > This part of code has been used for a long time and we've never met > > > the stall Issue which means SCU firmware guarantee it well. But I > > > agree a timeout mechanism Is better. However, if only for this > > > reason, we can simply add a timeout mechanism in MU library function > > > as well, but still is far from a strong enough reason to switch to a more > > complexed mailbox one. > > > > At this point a have absolutely zero tolerance. At the end I was one on poor > > devs hunting similar kind of stalls. > > Believe me, what can theoretically with 1% probability happen in the lab, will > > end with days/months of bug hunting work and thousands of field returns. > > > > Yeah, so I think a timeout mechanism is worthy to add. > > > > > Can you please provide (if possible) your old mailbox based > > implementation. > > > > I'm curious to see why it is slow. > > > > > > In our implementation: > > > 1) One channel per MU > > > 2) Tx using the same way to send msg as sc_ipc_write() in polling mode > > > 3) Rx enables the first word interrupt and polling for the rest of > > > them in a hrtimer. > > > > > > The possible extra cost comparing to simple polling way: > > > 1) Extra unnecessary code execution path of mailbox which is not used > > > by SCU MU > > > 2) Interrupt latency > > > 3) Extra memory copy handling RX message separately. > > > 4) Extra schedule of hrtimer polling > > > > > > Some of them probably could be optimized. However, besides the slow > > > problem, the extra unnecessary complexity and can't be generic > > > (specific to SCU) are also important ones. > > > > > > And the MU general purpose interrupt feature and general purpose flags > > > feature may also not supported by mailbox well. > > > > Ok, I give up. > > Can we at least try to provide one device tree binding documentation for > > that? > > I will update the binding doc to use mailbox way as suggested by Rob. > But I still need to change mbox-cells to allow 0 which actually already exist > In kernel. So we may have too options for MU binding for users. > For SCU MU, mbox-cells = <0> > For General MU, mbox-cells = <1> ok. cool. > > At the end, it is one and the same HW IP block spread in one SoC (or > > different SoCs) an be used in different way. How exactly it will be used is the > > choice of the developer/customer/user... > > even if it will be described withing mailbox section dos not mean you are > > forced to use mailbox framework. > > > > Lets imagine worst case scenario and all of MU on i.MX8 are used by > > different drivers. In my mailbox binding I suggest to use <vendor>,<soc>- > > mu-<mu side>. On i.MX7 there is only one MU, so it looks like "fsl,imx7s-mu- > > a" and "fsl,imx7s-mu-b". i.MX8 has multiple MU so it should be enumerated. > > Probably it will look like: "fsl,imx8x-mu0-a". > > Do it make sense for you? Can we find and agreement here? :) > > > > IMHO one possible concern may be that results in creating two much compatibles > strings. For example, each SoC have two (fsl, <soc>-mu-<a or b>). > Now with MU supported SoCs, we have mx6sx, mx7ulp, Mx7d, mx8qm, > mx8x, mx8mq and etc... > > My question is that if it's really worthy to create a separate side b compatible > string instread of distinguish it by a property? > > And for general purpose MUs to communicate with M4. Both side can be used by > either A core and M core. If we're doing this way, once users wants A core to access > B side, users need to change the compatible string, that seems more like an unusual > way compared to changing properties. > > How do you think? My current use case is Linux with DT running on all CPUs of one SoC. On i.MX7 there is only one MU and I use same mailbox driver on both sides. In this case it is enough to have same compatible with extra parameter to see the difference between A and B side. Just imagine, you'll use DT in your firmware on i.MX8. Will you use same driver on both sides of MU? If yes, I'm OK to exclude A and B from compatible.
> -----Original Message----- > From: Oleksij Rempel [mailto:o.rempel@pengutronix.de] > Sent: Friday, June 22, 2018 2:49 PM > To: A.s. Dong <aisheng.dong@nxp.com> > Cc: Sascha Hauer <s.hauer@pengutronix.de>; Rob Herring > <robh@kernel.org>; Mark Rutland <mark.rutland@arm.com>; > devicetree@vger.kernel.org; dongas86@gmail.com; dl-linux-imx <linux- > imx@nxp.com>; kernel@pengutronix.de; Fabio Estevam > <fabio.estevam@nxp.com>; shawnguo@kernel.org; linux-arm- > kernel@lists.infradead.org > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding doc > > On Fri, Jun 22, 2018 at 05:59:30AM +0000, A.s. Dong wrote: > > Hi Oleksij, > > > > > -----Original Message----- > > > From: Oleksij Rempel [mailto:o.rempel@pengutronix.de] > > > Sent: Friday, June 22, 2018 12:59 PM > > > To: A.s. Dong <aisheng.dong@nxp.com> > > > Cc: Sascha Hauer <s.hauer@pengutronix.de>; Rob Herring > > > <robh@kernel.org>; Mark Rutland <mark.rutland@arm.com>; > > > devicetree@vger.kernel.org; dongas86@gmail.com; dl-linux-imx <linux- > > > imx@nxp.com>; kernel@pengutronix.de; Fabio Estevam > > > <fabio.estevam@nxp.com>; shawnguo@kernel.org; linux-arm- > > > kernel@lists.infradead.org > > > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu binding > > > doc > > > > > > On Fri, Jun 22, 2018 at 03:31:11AM +0000, A.s. Dong wrote: > > > > > -----Original Message----- > > > > > From: Oleksij Rempel [mailto:o.rempel@pengutronix.de] > > > > > Sent: Friday, June 22, 2018 2:09 AM > > > > > To: A.s. Dong <aisheng.dong@nxp.com> > > > > > Cc: Sascha Hauer <s.hauer@pengutronix.de>; Rob Herring > > > > > <robh@kernel.org>; Mark Rutland <mark.rutland@arm.com>; > > > > > devicetree@vger.kernel.org; dongas86@gmail.com; dl-linux-imx > > > > > <linux- imx@nxp.com>; kernel@pengutronix.de; Fabio Estevam > > > > > <fabio.estevam@nxp.com>; shawnguo@kernel.org; linux-arm- > > > > > kernel@lists.infradead.org > > > > > Subject: Re: [PATCH V2 2/4] dt-bindings: arm: fsl: add mu > > > > > binding doc > > > > > > > > > > Hi, > > > > > > > > > > On Thu, Jun 21, 2018 at 05:11:33PM +0000, A.s. Dong wrote: > > > > > > Hi Sascha, > > > > > > > On Wed, Jun 20, 2018 at 01:43:10PM -0600, Rob Herring wrote: > > > > > > > > On Sun, Jun 17, 2018 at 08:49:47PM +0800, Dong Aisheng wrote: > > > > > > > > > The Messaging Unit module enables two processors within > > > > > > > > > the SoC to communicate and coordinate by passing messages > (e.g. > > > > > > > > > data, status and control) through the MU interface. > > > > > > > > > > > > > > > > > > --- > > > > > > > > > v1->v2: > > > > > > > > > * typo fixes > > > > > > > > > * remove status property > > > > > > > > > * remove imx6&7 compatible string which may be added later > for > > > > > > > > > the generic mailbox binding > > > > > > > > > > > > > > > > > > Note: Because MU used by SCU is not implemented as a > > > > > > > > > mailbox driver, Instead, they're provided in library > > > > > > > > > calls to gain higher > > > > > performance. > > > > > > > > > > > > > > > > Using a binding doesn't mean you have to use an OS's > subsystem. > > > > > > > > > > > > > > > > What needs higher performance? What's the performance > > > difference? > > > > > > > Why > > > > > > > > can't the mailbox framework be improved? > > > > > > > > > > > > > > From what I see the performance is improved by polling the > > > > > > > interrupt registers rather than using interrupts. > > > > > > > I see no reason though why this can't be implemented with > > > > > > > the mailbox framework as is. > > > > > > > > > > > > > > > > > > > I thought you've agreed to not write generic MU(mailbox) > > > > > > driver for > > > SCU. > > > > > > https://www.spinics.net/lists/arm-kernel/msg650217.html > > > > > > But seems it's still not quite certain... > > > > > > > > > > > > I'd like to explain some more. > > > > > > > > > > > > 1) the interrupt mechanism is not quite suitable for SCU > > > > > > firmware protocol as the transfer size would be more than 4 > > > > > > words and the response data size is also undetermined (it's > > > > > > set by SCU firmware side > > > > > during a response). > > > > > > So polling mode may be the best way to handle this as MU > > > > > > message handling usually is quite fast in a few microseconds. > > > > > > > > > > > > 2) It's true that Mailbox framework is well designed and powerful. > > > > > > But it's not quite suitable for SCU MU as we don't need to use > > > > > > the most bits of it. Mailbox seems like to be more suitable > > > > > > for a generic MU mailbox driver used by various > > > > > > clients/servers. But SCU MU are quite specific to SCU > > > > > > protocol and can't be used by other clients (MU > > > > > > 0~4 is fixed for SCU communication in MX8 HW design). > > > > > > Even we write a MU Mailbox driver for SCU MU, it's still not a > > > > > > general one and can't be used by others (e.g. communication with > M4). > > > > > > So I'd believe the current library way is still the best > > > > > > approach for SCU MU Using. But I'm also okay for another > > > > > > generic MU drivers for other common communications between A > core and M4 side. > > > > > > > > > > > > 3) We actually have tried the MU(Mailbox) internally, it > > > > > > increased a lot complexity comparing to the current library > > > > > > way and got a booting time regression issue due to extra > > > > > > delays introduced in handling SCU protocol in mailbox way. > > > > > > > > > > > > And finally a nature question to us is: > > > > > > What the benefit we can get for SCU MU using a mailbox way? > > > > > > > > > > > > If we can't find benefits but introduce more complexities then > > > > > > why we would do that way? > > > > > > > > > > Looks like my response to same topic within my patch set is > > > > > lost, so I repost it > > > > > here: > > > > > > > > > > ok.. let's take some of IMX8 SCU driver code to see if there any > > > difference: > > > > > > > > > > ..this part of the code is blocking write procedure for one > > > > > channeler (register or what ever name you prefer) per write.. correct? > > > > > > > > > > +void mu_send_msg(struct mu_priv *priv, uint32_t index, uint32_t > > > > > +msg) > > > { > > > > > + uint32_t mask = MU_SR_TE0_MASK >> index; > > > > > + > > > > > + /* Wait TX register to be empty. */ > > > > > + while (!(readl_relaxed(priv->base + MU_ASR) & mask)) > > > > > + ; > > > > > + writel_relaxed(msg, priv->base + MU_ATR0 + (index * 4)); } > > > > > +EXPORT_SYMBOL_GPL(mu_send_msg); > > > > > > > > > > According to documentation it is recommended to use only one > > > > > status bit for the last register to use MU as one big 4words sized pipe. > > > > > But, there is no way you can write to all 4 registers without > > > > > checking status for each of this register, because your protocol > > > > > has dynamic message size. So you are forced to use your one > > > > > channel as 4 > > > separate channels. > > > > > Write it part of the message separately and allow your firmware > > > > > read > > > > > 1 word to understand how to behave on the rest of the message. > > > > > > > > > > +static void sc_ipc_write(struct sc_ipc *sc_ipc, void *data) { > > > > > + sc_rpc_msg_t *msg = (sc_rpc_msg_t *) data; > > > > > + uint8_t count = 0; > > > > > + > > > > > + /* Check size */ > > > > > + if (msg->size > SC_RPC_MAX_MSG) > > > > > + return; > > > > > + > > > > > + /* Write first word */ > > > > > + mu_send_msg(sc_ipc->mu_base, 0, *((uint32_t *) msg)); > > > > > + count++; > > > > > > > > > > .. in this loop you are writing to one channel/register per > > > > > loop. If the communicate will stall for some reason, the linux > > > > > system will just freeze here without any timeout or error > > > > > message.. no idea how > > > about the opposite site. > > > > > > > > > > + /* Write remaining words */ > > > > > + while (count < msg->size) { > > > > > + mu_send_msg(sc_ipc->mu_base, count % > MU_TR_COUNT, > > > > > + msg->DATA.u32[count - 1]); > > > > > + count++; > > > > > + } > > > > > +} > > > > > > > > > > > > > > > ... and here is a proof that sc_ipc_write will do in some cases > > > > > 5 rounds > > > > > (5 * 4 bytes = 20 bytes single message) with probable busy > > > > > waiting for each channel > > > > > > > > > > +sc_err_t sc_misc_seco_image_load(sc_ipc_t ipc, uint32_t addr_src, > > > > > + uint32_t addr_dst, uint32_t len, bool > fw) { > > > > > + sc_rpc_msg_t msg; > > > > > + uint8_t result; > > > > > + > > > > > + RPC_VER(&msg) = SC_RPC_VERSION; > > > > > + RPC_SVC(&msg) = (uint8_t)SC_RPC_SVC_MISC; > > > > > + RPC_FUNC(&msg) = > (uint8_t)MISC_FUNC_SECO_IMAGE_LOAD; > > > > > + RPC_U32(&msg, 0) = addr_src; > > > > > + RPC_U32(&msg, 4) = addr_dst; > > > > > + RPC_U32(&msg, 8) = len; > > > > > + RPC_U8(&msg, 12) = (uint8_t)fw; > > > > > + RPC_SIZE(&msg) = 5; > > > > > + > > > > > + sc_call_rpc(ipc, &msg, false); > > > > > + > > > > > + result = RPC_R8(&msg); > > > > > + return (sc_err_t)result; > > > > > +} > > > > > + > > > > > > > > > > So, the same code with mailbox framework will be some thing like this: > > > > > 1. request all 4 channels in the probe. ignore completion > > > > > callback and set proper timeout. > > > > > > > > > > > > > That looks a bit strange. As I said in another email, MU physical > > > > does not have multi Channels (here you mean are virtual channels). > > > > And one whole MU instance is Exclusively used by SCU, why we need > > > > abstract them into 4 channels to use separately with extra > > > > unnecessary resource > > > hold and code path executed. > > > > > > OK, so this MU should configured to use all 4 registers as one channel. > > > I have nothing against it to do in generic driver. > > > > > > > > 2. keep your old code by replacing this part. > > > > > /* Write remaining words */ > > > > > while (count < msg->size) { > > > > > mbox_send_message(sc_ipc->mbox_chan[count % > > > MU_TR_COUNT], > > > > > msg->DATA.u32[count - 1]); > > > > > count++; > > > > > } > > > > > > > > > > The advantage of this variant. If SCU firmware will stall, the > > > > > linux will be able to notify about it without blocking complete system. > > > > > > > > > > > > > This part of code has been used for a long time and we've never > > > > met the stall Issue which means SCU firmware guarantee it well. > > > > But I agree a timeout mechanism Is better. However, if only for > > > > this reason, we can simply add a timeout mechanism in MU library > > > > function as well, but still is far from a strong enough reason to > > > > switch to a more > > > complexed mailbox one. > > > > > > At this point a have absolutely zero tolerance. At the end I was one > > > on poor devs hunting similar kind of stalls. > > > Believe me, what can theoretically with 1% probability happen in the > > > lab, will end with days/months of bug hunting work and thousands of > field returns. > > > > > > > Yeah, so I think a timeout mechanism is worthy to add. > > > > > > > Can you please provide (if possible) your old mailbox based > > > implementation. > > > > > I'm curious to see why it is slow. > > > > > > > > In our implementation: > > > > 1) One channel per MU > > > > 2) Tx using the same way to send msg as sc_ipc_write() in polling > > > > mode > > > > 3) Rx enables the first word interrupt and polling for the rest of > > > > them in a hrtimer. > > > > > > > > The possible extra cost comparing to simple polling way: > > > > 1) Extra unnecessary code execution path of mailbox which is not > > > > used by SCU MU > > > > 2) Interrupt latency > > > > 3) Extra memory copy handling RX message separately. > > > > 4) Extra schedule of hrtimer polling > > > > > > > > Some of them probably could be optimized. However, besides the > > > > slow problem, the extra unnecessary complexity and can't be > > > > generic (specific to SCU) are also important ones. > > > > > > > > And the MU general purpose interrupt feature and general purpose > > > > flags feature may also not supported by mailbox well. > > > > > > Ok, I give up. > > > Can we at least try to provide one device tree binding documentation > > > for that? > > > > I will update the binding doc to use mailbox way as suggested by Rob. > > But I still need to change mbox-cells to allow 0 which actually > > already exist In kernel. So we may have too options for MU binding for > users. > > For SCU MU, mbox-cells = <0> > > For General MU, mbox-cells = <1> > > ok. cool. > > > > At the end, it is one and the same HW IP block spread in one SoC (or > > > different SoCs) an be used in different way. How exactly it will be > > > used is the choice of the developer/customer/user... > > > even if it will be described withing mailbox section dos not mean > > > you are forced to use mailbox framework. > > > > > > Lets imagine worst case scenario and all of MU on i.MX8 are used by > > > different drivers. In my mailbox binding I suggest to use > > > <vendor>,<soc>- mu-<mu side>. On i.MX7 there is only one MU, so it > > > looks like "fsl,imx7s-mu- a" and "fsl,imx7s-mu-b". i.MX8 has multiple MU > so it should be enumerated. > > > Probably it will look like: "fsl,imx8x-mu0-a". > > > Do it make sense for you? Can we find and agreement here? :) > > > > > > > IMHO one possible concern may be that results in creating two much > > compatibles strings. For example, each SoC have two (fsl, <soc>-mu-<a or > b>). > > Now with MU supported SoCs, we have mx6sx, mx7ulp, Mx7d, mx8qm, > mx8x, > > mx8mq and etc... > > > > My question is that if it's really worthy to create a separate side b > > compatible string instread of distinguish it by a property? > > > > And for general purpose MUs to communicate with M4. Both side can be > > used by either A core and M core. If we're doing this way, once users > > wants A core to access B side, users need to change the compatible > > string, that seems more like an unusual way compared to changing > properties. > > > > How do you think? > > My current use case is Linux with DT running on all CPUs of one SoC. On > i.MX7 there is only one MU and I use same mailbox driver on both sides. In > this case it is enough to have same compatible with extra parameter to see > the difference between A and B side. > Just imagine, you'll use DT in your firmware on i.MX8. Will you use same > driver on both sides of MU? If yes, I'm OK to exclude A and B from > compatible. > NXP release only provides a FreeRTOS based image running on M4 side. Don't support Linux on M4. So we normally won't run the same driver for both sides of MU. But for Linux community, it's good idea if Linux can also run on M4 and using the same MU driver. Regards Dong Aisheng > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,mu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,mu.txt new file mode 100644 index 0000000..c37aa1d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,mu.txt @@ -0,0 +1,32 @@ +NXP i.MX Messaging Unit (MU) +-------------------------------------------------------------------- + +The Messaging Unit module enables two processors within the SoC to +communicate and coordinate by passing messages (e.g. data, status +and control) through the MU interface. The MU also provides the ability +for one processor to signal the other processor using interrupts. + +Because the MU manages the messaging between processors, the MU uses +different clocks (from each side of the different peripheral buses). +Therefore, the MU must synchronize the accesses from one side to the +other. The MU accomplishes synchronization using two sets of matching +registers (Processor A-facing, Processor B-facing). + +Messaging Unit Device Node: +============================= + +Required properties: +------------------- +- compatible : should be "fsl,<chip>-mu", the supported chips include + imx8qxp, imx8qm. +- reg : Should contain the registers location and length +- interrupts : Interrupt number. The interrupt specifier format depends + on the interrupt controller parent. + +Examples: +-------- +lsio_mu0: mu@5d1b0000 { + compatible = "fsl,imx8qxp-mu"; + reg = <0x0 0x5d1b0000 0x0 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; +};
The Messaging Unit module enables two processors within the SoC to communicate and coordinate by passing messages (e.g. data, status and control) through the MU interface. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- v1->v2: * typo fixes * remove status property * remove imx6&7 compatible string which may be added later for the generic mailbox binding Note: Because MU used by SCU is not implemented as a mailbox driver, Instead, they're provided in library calls to gain higher performance. Futhermore, SCU MU has only one channel. But the binding doc claims (Change to allow 0?) So we did not follow the mailbox binding. For the generic mailbox driver binding way, it may be added later. --- .../devicetree/bindings/arm/freescale/fsl,mu.txt | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,mu.txt