| Message ID | 1519117905-12095-1-git-send-email-amelie.delaunay@st.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | usb: host: ehci-platform: add support for optional external vbus supply | expand |
Hi, On 20/02/18 11:11, Amelie Delaunay wrote: > On some boards, especially when vbus supply requires large current, > and the charge pump on the PHY isn't enough, an external vbus power switch > may be used. > Add support for this optional external vbus supply in ehci-platform. Isn't this generic enough to be done for all *hci-platform drivers? And if this is a VBUS supply to the port, the root hub driver should be controlling it based on port power on/off commands to the port right? > > Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> > --- > Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 + > drivers/usb/host/ehci-platform.c | 23 ++++++++++++++++++++++ > 2 files changed, 24 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt > index 3efde12..fc480cd 100644 > --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt > +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt > @@ -19,6 +19,7 @@ Optional properties: > - phys : phandle + phy specifier pair > - phy-names : "usb" > - resets : phandle + reset specifier pair > + - vbus-supply : phandle of regulator supplying vbus > > Example (Sequoia 440EPx): > ehci@e0000300 { > diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c > index b065a96..76cc781 100644 > --- a/drivers/usb/host/ehci-platform.c > +++ b/drivers/usb/host/ehci-platform.c > @@ -29,6 +29,7 @@ > #include <linux/of.h> > #include <linux/phy/phy.h> > #include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > #include <linux/reset.h> > #include <linux/usb.h> > #include <linux/usb/hcd.h> > @@ -46,6 +47,7 @@ struct ehci_platform_priv { > struct reset_control *rsts; > struct phy **phys; > int num_phys; > + struct regulator *vbus_supply; > bool reset_on_resume; > }; > > @@ -99,6 +101,15 @@ static int ehci_platform_power_on(struct platform_device *dev) > } > } > > + if (priv->vbus_supply) { > + ret = regulator_enable(priv->vbus_supply); > + if (ret) { > + dev_err(&dev->dev, > + "failed to enable vbus supply: %d\n", ret); > + goto err_exit_phy; > + } > + } > + > return 0; > > err_exit_phy: > @@ -119,6 +130,9 @@ static void ehci_platform_power_off(struct platform_device *dev) > struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); > int clk, phy_num; > > + if (priv->vbus_supply) > + regulator_disable(priv->vbus_supply); > + If we disable the VBUS here, which is being called during ehci_platform_suspend(), how can we expect remote wakeup to work? This is unconditionally powering down the port. > for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { > phy_power_off(priv->phys[phy_num]); > phy_exit(priv->phys[phy_num]); > @@ -247,6 +261,15 @@ static int ehci_platform_probe(struct platform_device *dev) > if (err) > goto err_put_clks; > > + priv->vbus_supply = devm_regulator_get_optional(&dev->dev, "vbus"); > + if (IS_ERR(priv->vbus_supply)) { > + err = PTR_ERR(priv->vbus_supply); > + if (err == -ENODEV) > + priv->vbus_supply = NULL; > + else > + goto err_reset; > + } > + > if (pdata->big_endian_desc) > ehci->big_endian_desc = 1; > if (pdata->big_endian_mmio) >
Hi, On 02/20/2018 10:27 AM, Roger Quadros wrote: > Hi, > > On 20/02/18 11:11, Amelie Delaunay wrote: >> On some boards, especially when vbus supply requires large current, >> and the charge pump on the PHY isn't enough, an external vbus power switch >> may be used. >> Add support for this optional external vbus supply in ehci-platform. > > Isn't this generic enough to be done for all *hci-platform drivers? > I can only test ehci-platform on my setup. > And if this is a VBUS supply to the port, the root hub driver should be controlling it > based on port power on/off commands to the port right? > You're right. This means to overload platform_overrides with .port_power = ehci_platform_port_power, and manage vbus_supply enable/disable in this function instead of ehci_platform_power_on/off. >> >> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> >> --- >> Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 + >> drivers/usb/host/ehci-platform.c | 23 ++++++++++++++++++++++ >> 2 files changed, 24 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt >> index 3efde12..fc480cd 100644 >> --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt >> +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt >> @@ -19,6 +19,7 @@ Optional properties: >> - phys : phandle + phy specifier pair >> - phy-names : "usb" >> - resets : phandle + reset specifier pair >> + - vbus-supply : phandle of regulator supplying vbus >> >> Example (Sequoia 440EPx): >> ehci@e0000300 { >> diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c >> index b065a96..76cc781 100644 >> --- a/drivers/usb/host/ehci-platform.c >> +++ b/drivers/usb/host/ehci-platform.c >> @@ -29,6 +29,7 @@ >> #include <linux/of.h> >> #include <linux/phy/phy.h> >> #include <linux/platform_device.h> >> +#include <linux/regulator/consumer.h> >> #include <linux/reset.h> >> #include <linux/usb.h> >> #include <linux/usb/hcd.h> >> @@ -46,6 +47,7 @@ struct ehci_platform_priv { >> struct reset_control *rsts; >> struct phy **phys; >> int num_phys; >> + struct regulator *vbus_supply; >> bool reset_on_resume; >> }; >> >> @@ -99,6 +101,15 @@ static int ehci_platform_power_on(struct platform_device *dev) >> } >> } >> >> + if (priv->vbus_supply) { >> + ret = regulator_enable(priv->vbus_supply); >> + if (ret) { >> + dev_err(&dev->dev, >> + "failed to enable vbus supply: %d\n", ret); >> + goto err_exit_phy; >> + } >> + } >> + >> return 0; >> >> err_exit_phy: >> @@ -119,6 +130,9 @@ static void ehci_platform_power_off(struct platform_device *dev) >> struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); >> int clk, phy_num; >> >> + if (priv->vbus_supply) >> + regulator_disable(priv->vbus_supply); >> + > > If we disable the VBUS here, which is being called during ehci_platform_suspend(), > how can we expect remote wakeup to work? > This is unconditionally powering down the port. > Sure. With .port_power, it will be OK. Thanks for review, Amelie >> for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { >> phy_power_off(priv->phys[phy_num]); >> phy_exit(priv->phys[phy_num]); >> @@ -247,6 +261,15 @@ static int ehci_platform_probe(struct platform_device *dev) >> if (err) >> goto err_put_clks; >> >> + priv->vbus_supply = devm_regulator_get_optional(&dev->dev, "vbus"); >> + if (IS_ERR(priv->vbus_supply)) { >> + err = PTR_ERR(priv->vbus_supply); >> + if (err == -ENODEV) >> + priv->vbus_supply = NULL; >> + else >> + goto err_reset; >> + } >> + >> if (pdata->big_endian_desc) >> ehci->big_endian_desc = 1; >> if (pdata->big_endian_mmio) >> >
diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt index 3efde12..fc480cd 100644 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -19,6 +19,7 @@ Optional properties: - phys : phandle + phy specifier pair - phy-names : "usb" - resets : phandle + reset specifier pair + - vbus-supply : phandle of regulator supplying vbus Example (Sequoia 440EPx): ehci@e0000300 { diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index b065a96..76cc781 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -29,6 +29,7 @@ #include <linux/of.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -46,6 +47,7 @@ struct ehci_platform_priv { struct reset_control *rsts; struct phy **phys; int num_phys; + struct regulator *vbus_supply; bool reset_on_resume; }; @@ -99,6 +101,15 @@ static int ehci_platform_power_on(struct platform_device *dev) } } + if (priv->vbus_supply) { + ret = regulator_enable(priv->vbus_supply); + if (ret) { + dev_err(&dev->dev, + "failed to enable vbus supply: %d\n", ret); + goto err_exit_phy; + } + } + return 0; err_exit_phy: @@ -119,6 +130,9 @@ static void ehci_platform_power_off(struct platform_device *dev) struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); int clk, phy_num; + if (priv->vbus_supply) + regulator_disable(priv->vbus_supply); + for (phy_num = 0; phy_num < priv->num_phys; phy_num++) { phy_power_off(priv->phys[phy_num]); phy_exit(priv->phys[phy_num]); @@ -247,6 +261,15 @@ static int ehci_platform_probe(struct platform_device *dev) if (err) goto err_put_clks; + priv->vbus_supply = devm_regulator_get_optional(&dev->dev, "vbus"); + if (IS_ERR(priv->vbus_supply)) { + err = PTR_ERR(priv->vbus_supply); + if (err == -ENODEV) + priv->vbus_supply = NULL; + else + goto err_reset; + } + if (pdata->big_endian_desc) ehci->big_endian_desc = 1; if (pdata->big_endian_mmio)
On some boards, especially when vbus supply requires large current, and the charge pump on the PHY isn't enough, an external vbus power switch may be used. Add support for this optional external vbus supply in ehci-platform. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 + drivers/usb/host/ehci-platform.c | 23 ++++++++++++++++++++++ 2 files changed, 24 insertions(+)