diff mbox series

[v2,2/2] ASoC: ak4458: Add bindings for AK4458 DAC

Message ID 1518531288-2017-3-git-send-email-cosmin.samoila@nxp.com
State Superseded, archived
Headers show
Series Add support for AK4458 DAC | expand

Commit Message

Cosmin Samoila Feb. 13, 2018, 2:14 p.m. UTC
Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp>
Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
---
 Documentation/devicetree/bindings/sound/ak4458.txt | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/ak4458.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/ak4458.txt b/Documentation/devicetree/bindings/sound/ak4458.txt
new file mode 100644
index 0000000..9bab245
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4458.txt
@@ -0,0 +1,23 @@ 
+AK4458 audio DAC
+
+This device supports both I2C and SPI modes.
+
+Required properties:
+
+- compatible : "asahi-kasei,ak4458"
+- reg : The I2C address of the device for I2C, the chip select number for SPI.
+
+Optional properties:
+- reset-gpios: A GPIO specifier for the power down & reset pin
+- mute-gpios: A GPIO specifier for the soft mute pin
+
+Example:
+
+&i2c {
+	ak4458: dac@10 {
+		compatible = "asahi-kasei,ak4458";
+		reg = <0x10>;
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>
+		mute-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>
+	};
+};