| Message ID | 1506502753-27408-13-git-send-email-mgautam@codeaurora.org |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | None | expand |
On Wed, Sep 27, 2017 at 02:29:08PM +0530, Manu Gautam wrote: > Update compatible string and clock names for QMP version V3 > USB PHY. > > Signed-off-by: Manu Gautam <mgautam@codeaurora.org> > --- > Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > index b6a9f2b..dcf1b8f 100644 > --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt > @@ -8,7 +8,8 @@ Required properties: > - compatible: compatible list, contains: > "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 > "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, > - "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996. > + "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, > + "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy. This is fine, but you will still need an SoC specific compatible in addition to this. Acked-by: Rob Herring <robh@kernel.org> Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index b6a9f2b..dcf1b8f 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -8,7 +8,8 @@ Required properties: - compatible: compatible list, contains: "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, - "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996. + "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, + "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy. - reg: offset and length of register set for PHY's common serdes block. @@ -25,10 +26,13 @@ Required properties: - clock-names: "cfg_ahb" for phy config clock, "aux" for phy aux clock, "ref" for 19.2 MHz ref clk, + "com_aux" for phy common block aux clock, For "qcom,msm8996-qmp-pcie-phy" must contain: "aux", "cfg_ahb", "ref". For "qcom,msm8996-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref". + For "qcom,qmp-v3-usb3-phy" must contain: + "aux", "cfg_ahb", "ref", "com_aux". - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names.
Update compatible string and clock names for QMP version V3 USB PHY. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> --- Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)