| Message ID | 1502108833-10317-1-git-send-email-peng.fan@nxp.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
Hi Peng, On Mon, Aug 7, 2017 at 9:27 AM, Peng Fan <peng.fan@nxp.com> wrote: > To 74hc595 and 74lv595, there is an OE(low active) input pin. > To some boards, this pin is controller by GPIO, so handling > this pin in driver. When driver probe, use GPIOD_OUT_LOW flag > when requesting the gpio, so OE is set to low when probe. Well, this depends of the GPIO polarity. > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > Cc: Linus Walleij <linus.walleij@linaro.org> > --- > drivers/gpio/gpio-74x164.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c > index a6607fa..e44422c 100644 > --- a/drivers/gpio/gpio-74x164.c > +++ b/drivers/gpio/gpio-74x164.c > @@ -23,6 +23,7 @@ struct gen_74x164_chip { > struct gpio_chip gpio_chip; > struct mutex lock; > u32 registers; > + struct gpio_desc *enable_gpio; > /* > * Since the registers are chained, every byte sent will make > * the previous byte shift to the next register in the > @@ -142,6 +143,12 @@ static int gen_74x164_probe(struct spi_device *spi) > chip->gpio_chip.parent = &spi->dev; > chip->gpio_chip.owner = THIS_MODULE; > > + chip->enable_gpio = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW); It would be better to use devm_gpiod_get_optional instead. > + if (IS_ERR(chip->enable_gpio)) { > + dev_dbg(&spi->dev, "No enable-gpios property\n"); > + chip->enable_gpio = NULL; > + } > + > mutex_init(&chip->lock); > > ret = __gen_74x164_write_config(chip); > @@ -164,6 +171,8 @@ static int gen_74x164_remove(struct spi_device *spi) > { > struct gen_74x164_chip *chip = spi_get_drvdata(spi); > > + if (chip->enable_gpio) > + gpiod_set_value(chip->enable_gpio, 0); It would be better to use the cansleep variant instead. Actually I have worked on adding this optional property, but haven't submitted yet: https://pastebin.com/u839DVD3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Aug 7, 2017 at 9:27 AM, Peng Fan <peng.fan@nxp.com> wrote: > + chip->enable_gpio = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW); > + if (IS_ERR(chip->enable_gpio)) { > + dev_dbg(&spi->dev, "No enable-gpios property\n"); > + chip->enable_gpio = NULL; Also, the error handling here is not correct as it will never propagate EPROBE_DEFER. I will submit my version of the patch if you don't mind. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> > + chip->enable_gpio = devm_gpiod_get(&spi->dev, "enable", > GPIOD_OUT_LOW); > > + if (IS_ERR(chip->enable_gpio)) { > > + dev_dbg(&spi->dev, "No enable-gpios property\n"); > > + chip->enable_gpio = NULL; > > Also, the error handling here is not correct as it will never propagate > EPROBE_DEFER. > > I will submit my version of the patch if you don't mind. That's ok if you have a better patch. Regards, Peng.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt index ce1b223..c878834 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt @@ -12,6 +12,9 @@ Required properties: 1 = active low - registers-number: Number of daisy-chained shift registers +Optional properties: +- enable-gpios: Specifier of the GPIO connected to OE pin + Example: gpio5: gpio5@0 {
There is an OE(low active) input pin for 74hc595 and 74lv595. To some boards, the OE pin is controlled by GPIO, so add an optional property "enable-gpios". Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> --- Documentation/devicetree/bindings/gpio/gpio-74x164.txt | 3 +++ 1 file changed, 3 insertions(+)