diff mbox

[1/5] Documentation: dt: socfpga: Add interrupt-controller to ecc-manager

Message ID 1464193783-5071-2-git-send-email-tthayer@opensource.altera.com
State Not Applicable, archived
Headers show

Commit Message

tthayer@opensource.altera.com May 25, 2016, 4:29 p.m. UTC 
From: Thor Thayer <tthayer@opensource.altera.com>

Designate the ECC Manager as an interrupt controller and add child
interrupts.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 .../bindings/arm/altera/socfpga-eccmgr.txt         |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

Comments

Rob Herring (Arm) June 1, 2016, 2:21 p.m. UTC | #1 
On Wed, May 25, 2016 at 11:29:39AM -0500, tthayer@opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Designate the ECC Manager as an interrupt controller and add child
> interrupts.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
>  .../bindings/arm/altera/socfpga-eccmgr.txt         |   14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)

Acked-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
index 5a6b160..15eb0df 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -61,7 +61,9 @@  Required Properties:
 - #address-cells: must be 1
 - #size-cells: must be 1
 - interrupts : Should be single bit error interrupt, then double bit error
-	interrupt. Note the rising edge type.
+	interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
 - ranges : standard definition, should translate from local addresses
 
 Subcomponents:
@@ -70,11 +72,15 @@  L2 Cache ECC
 Required Properties:
 - compatible : Should be "altr,socfpga-a10-l2-ecc"
 - reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
 
 On-Chip RAM ECC
 Required Properties:
 - compatible : Should be "altr,socfpga-a10-ocram-ecc"
 - reg        : Address and size for ECC block registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
 
 Example:
 
@@ -85,15 +91,21 @@  Example:
 		#size-cells = <1>;
 		interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 		ranges;
 
 		l2-ecc@ffd06010 {
 			compatible = "altr,socfpga-a10-l2-ecc";
 			reg = <0xffd06010 0x4>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+				     <32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		ocram-ecc@ff8c3000 {
 			compatible = "altr,socfpga-a10-ocram-ecc";
 			reg = <0xff8c3000 0x90>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+				     <33 IRQ_TYPE_LEVEL_HIGH> ;
 		};
 	};