From patchwork Sat Nov 21 00:17:15 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Joshua Henderson X-Patchwork-Id: 547100 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 2B55A14148C for ; Sat, 21 Nov 2015 11:22:39 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1163387AbbKUAWT (ORCPT ); Fri, 20 Nov 2015 19:22:19 -0500 Received: from exsmtp03.microchip.com ([198.175.253.49]:24689 "EHLO email.microchip.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1761359AbbKUATg (ORCPT ); Fri, 20 Nov 2015 19:19:36 -0500 Received: from mx.microchip.com (10.10.76.4) by chn-sv-exch03.mchp-main.com (10.10.76.49) with Microsoft SMTP Server id 14.3.181.6; Fri, 20 Nov 2015 17:14:27 -0700 Received: by mx.microchip.com (sSMTP sendmail emulation); Fri, 20 Nov 2015 17:20:54 -0700 From: Joshua Henderson To: CC: , Purna Chandra Mandal , Joshua Henderson , Rob Herring , "Pawel Moll" , Mark Rutland , Ian Campbell , Kumar Gala , Subject: [PATCH 03/14] DEVICETREE: Add PIC32 clock binding documentation Date: Fri, 20 Nov 2015 17:17:15 -0700 Message-ID: <1448065205-15762-4-git-send-email-joshua.henderson@microchip.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1448065205-15762-1-git-send-email-joshua.henderson@microchip.com> References: <1448065205-15762-1-git-send-email-joshua.henderson@microchip.com> MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Purna Chandra Mandal Document the devicetree bindings for the clock driver found on Microchip PIC32 class devices. Signed-off-by: Purna Chandra Mandal Signed-off-by: Joshua Henderson --- .../devicetree/bindings/clock/microchip,pic32.txt | 263 ++++++++++++++++++++ 1 file changed, 263 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/microchip,pic32.txt diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32.txt b/Documentation/devicetree/bindings/clock/microchip,pic32.txt new file mode 100644 index 0000000..4cef72d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/microchip,pic32.txt @@ -0,0 +1,263 @@ +Binding for a Clock hardware block found on +certain Microchip PIC32 MCU devices. + +Microchip SoC clocks-node consists of few oscillators, PLL, multiplexer +and few divider nodes. + +We will find only the base address of the clock tree, this base +address is common for some of the subnodes, not all. If no address is +specified for any of subnode base address of the clock tree will be +treated as its base. Each of subnodes follow the same common clock +binding with some additional optional properties. + + clocks_node { + reg = <>; + + spll_node { + ... + }; + + frcdiv_node { + ... + }; + + sysclk_mux_node { + ... + }; + + pbdiv_node { + ... + }; + + refoclk_node { + ... + }; + ... + }; + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : should have "microchip,pic32-clk". +- reg : A Base address and length of the register set. +- interrupts : source of interrupt. + +Optional properties (for subnodes): +- #clock-cells: From common clock binding, should be 0. + +- microchip,clock-indices: in multiplexer node clock sources always aren't linear + and contiguous. This property helps define clock-sources with respect to + the mux clock node. + +- microchip,ignore-unused : ignore gate request even if the gated clock is unused. +- microchip,status-bit-mask: bitmask for status check. This will be used to confirm + particular operation by clock sub-node is completed. It is dependent sub-node. +- microchip,bit-mask: enable mask, similar to microchip,status-bit-mask. +- microchip,slew-step: enable frequency slewing(stepping) during rate change; + applicable only to sys-clock subnode. + +Example: + +/* PIC32 specific clks */ +pic32_clktree { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1f801200 0x200>; + compatible = "microchip,pic32-clk"; + interrupts = <12>; + ranges; + + /* secondary oscillator; external input on SOSCI pin */ + SOSC:sosc_clk { + #clock-cells = <0>; + compatible = "microchip,pic32-sosc"; + clock-frequency = <32768>; + reg = <0x1f801200 0x10 /* enable reg */ + 0x1f801390 0x10>; /* status reg */ + microchip,bit-mask = <0x02>; /* enable mask */ + microchip,status-bit-mask = <0x10>; /* status-mask*/ + }; + + FRCDIV:frcdiv_clk { + #clock-cells = <0>; + compatible = "microchip,pic32-frcdivclk"; + clocks = <&FRC>; + clock-output-names = "frcdiv_clk"; + }; + + /* System PLL clock */ + SYSPLL:spll_clk { + #clock-cells = <0>; + compatible = "microchip,pic32-syspll"; + reg = <0x1f801220 0x10 /* SPLL register */ + 0x1f801390 0x10>; /* CLKSTAT register */ + clocks = <&POSC>, <&FRC>; + clock-output-names = "sys_pll"; + microchip,status-bit-mask = <0x80>; /* SPLLRDY */ + }; + + /* system clock; mux with postdiv & slew */ + SYSCLK:sys_clk { + #clock-cells = <0>; + compatible = "microchip,pic32-sysclk-v2"; + reg = <0x1f8013c0 0x04>; /* SLEWCON */ + clocks = <&FRCDIV>, <&SYSPLL>, <&POSC>, <&SOSC>, + <&LPRC>, <&FRCDIV>; + microchip,clock-indices = <0>, <1>, <2>, <4>, <5>, <7>; + clock-output-names = "sys_clk"; + }; + + /* DDR Ctrl & DDR PHY PLL */ + MPLL: CLK_MPLL { + #clock-cells = <0>; + compatible = "microchip,pic32-mpll"; + reg = <0x1f800100 0x04>; /* CFGMPLL */ + clocks = <&POSC>; + clock-output-names = "pic32-mpll"; + status = "disabled"; + }; + + /* Peripheral bus1 clock */ + PBCLK1:pb1_clk { + reg = <0x1f801340 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32-pbclk"; + clocks = <&SYSCLK>; + clock-output-names = "pb1_clk"; + /* used by system modules, not gateable */ + microchip,ignore-unused; + }; + + /* Peripheral bus2 clock */ + PBCLK2:pb2_clk { + reg = <0x1f801350 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32-pbclk"; + clocks = <&SYSCLK>; + clock-output-names = "pb2_clk"; + /* avoid gating even if unused */ + microchip,ignore-unused; + }; + + /* Peripheral bus3 clock */ + PBCLK3:pb3_clk { + reg = <0x1f801360 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32-pbclk"; + clocks = <&SYSCLK>; + clock-output-names = "pb3_clk"; + }; + + /* Peripheral bus4 clock(I/O ports, GPIO) */ + PBCLK4:pb4_clk { + reg = <0x1f801370 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32-pbclk"; + clocks = <&SYSCLK>; + clock-output-names = "pb4_clk"; + }; + + /* Peripheral bus clock */ + PBCLK5:pb5_clk { + reg = <0x1f801380 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32-pbclk"; + clocks = <&SYSCLK>; + clock-output-names = "pb5_clk"; + }; + + /* Peripheral Bus6 clock; */ + PBCLK6:pb6_clk { + reg = <0x1f801390 0x10>; + compatible = "microchip,pic32-pbclk"; + clocks = <&SYSCLK>; + #clock-cells = <0>; + }; + + /* Peripheral bus7 clock */ + PBCLK7:pb7_clk { + reg = <0x1f8013A0 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32-pbclk"; + /* CPU is driven by this clock; so named */ + clock-output-names = "cpu_clk"; + clocks = <&SYSCLK>; + }; + + /* Reference Oscillator clock for SPI/I2S */ + REFCLKO1:refo1_clk { + reg = <0x1f801280 0x20>; + #clock-cells = <0>; + compatible = "microchip,pic32-refoclk"; + clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, + <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; + microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, <5>, + <7>, <8>, <9>; + clock-output-names = "refo1_clk"; + clock-frequency = <10000000>; /* 10Mhz for I2S MCLK */ + }; + + /* Reference Oscillator clock for SQI */ + REFCLKO2:refo2_clk { + reg = <0x1f8012A0 0x20>; + #clock-cells = <0>; + compatible = "microchip,pic32-refoclk"; + clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, + <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; + microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, <5>, + <7>, <8>, <9>; + clock-output-names = "refo2_clk"; + clock-frequency = <50000000>; /* 50MHz for SQI */ + }; + + /* Reference Oscillator clock, ADC */ + REFCLKO3:refo3_clk { + reg = <0x1f8012C0 0x20>; + compatible = "microchip,pic32-refoclk"; + clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, + <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; + microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, <5>, + <7>, <8>, <9>; + #clock-cells = <0>; + clock-output-names = "refo3_clk"; + clock-frequency = <10000000>; /* 1Mhz */ + }; + + /* Reference Oscillator clock */ + REFCLKO4:refo4_clk { + reg = <0x1f8012E0 0x20>; + compatible = "microchip,pic32-refoclk"; + clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, + <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; + microchip,clock-indices = <0>,<1>,<2>,<3>,<4>,<5>,<7>, + <8>,<9>; + #clock-cells = <0>; + clock-output-names = "refo4_clk"; + clock-frequency = <25000000>; /* 25Mhz */ + }; + + /* Reference Oscillator clock, LCD */ + REFCLKO5:refo5_clk { + reg = <0x1f801300 0x20>; + compatible = "microchip,pic32-refoclk"; + clocks = <&SYSCLK>,<&PBCLK1>,<&POSC>,<&FRC>,<&LPRC>, + <&SOSC>,<&SYSPLL>,<&REFIx>,<&BFRC>; + microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, <5>, + <7>, <8>,<9>; + #clock-cells = <0>; + clock-output-names = "refo5_clk"; + clock-frequency = <40000000>; /* 40Mhz */ + }; +}; + +The clock consumer should specify the desired clock by having the clocks in its +"clock" phandle cell. For example for UART: + +uart2: serial@<> { + compatible = "microchip,pic32-uart"; + reg = <>; + interrupts = <>; + clocks = <&PBCLK2>; +}