diff mbox

[v5,1/2] dt-bindings: simplefb: Support regulator supply properties

Message ID 1447734663-19189-2-git-send-email-wens@csie.org
State Not Applicable, archived
Headers show

Commit Message

Chen-Yu Tsai Nov. 17, 2015, 4:31 a.m. UTC
The physical display tied to the framebuffer may have regulators
providing power to it, such as power for LCDs or interface conversion
chips.

The number of regulators in use may vary, but the regulator supply
binding can not be a list. Instead just support any named regulator
supply properties under the device node. These should be properly
named to match the device schematics / design. The driver should
take care to go through them all.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
---
 .../devicetree/bindings/display/simple-framebuffer.txt      | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

Comments

Rob Herring Nov. 17, 2015, 8:50 p.m. UTC | #1
On Tue, Nov 17, 2015 at 12:31:02PM +0800, Chen-Yu Tsai wrote:
> The physical display tied to the framebuffer may have regulators
> providing power to it, such as power for LCDs or interface conversion
> chips.
> 
> The number of regulators in use may vary, but the regulator supply
> binding can not be a list. Instead just support any named regulator
> supply properties under the device node. These should be properly
> named to match the device schematics / design. The driver should
> take care to go through them all.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> Acked-by: Mark Brown <broonie@kernel.org>

Not really happy to see the continued expansion of simplefb binding, but

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  .../devicetree/bindings/display/simple-framebuffer.txt      | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.txt b/Documentation/devicetree/bindings/display/simple-framebuffer.txt
> index 4474ef6e0b95..8c9e9f515c87 100644
> --- a/Documentation/devicetree/bindings/display/simple-framebuffer.txt
> +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.txt
> @@ -47,10 +47,14 @@ Required properties:
>    - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
>  
>  Optional properties:
> -- clocks : List of clocks used by the framebuffer. Clocks listed here
> -           are expected to already be configured correctly. The OS must
> -           ensure these clocks are not modified or disabled while the
> -           simple framebuffer remains active.
> +- clocks : List of clocks used by the framebuffer.
> +- *-supply : Any number of regulators used by the framebuffer. These should
> +	     be named according to the names in the device's design.
> +
> +  The above resources are expected to already be configured correctly.
> +  The OS must ensure they are not modified or disabled while the simple
> +  framebuffer remains active.
> +
>  - display : phandle pointing to the primary display hardware node
>  
>  Example:
> @@ -68,6 +72,7 @@ chosen {
>  		stride = <(1600 * 2)>;
>  		format = "r5g6b5";
>  		clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
> +		lcd-supply = <&reg_dc1sw>;
>  		display = <&lcdc0>;
>  	};
>  	stdout-path = "display0";
> -- 
> 2.6.2
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.txt b/Documentation/devicetree/bindings/display/simple-framebuffer.txt
index 4474ef6e0b95..8c9e9f515c87 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.txt
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.txt
@@ -47,10 +47,14 @@  Required properties:
   - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
 
 Optional properties:
-- clocks : List of clocks used by the framebuffer. Clocks listed here
-           are expected to already be configured correctly. The OS must
-           ensure these clocks are not modified or disabled while the
-           simple framebuffer remains active.
+- clocks : List of clocks used by the framebuffer.
+- *-supply : Any number of regulators used by the framebuffer. These should
+	     be named according to the names in the device's design.
+
+  The above resources are expected to already be configured correctly.
+  The OS must ensure they are not modified or disabled while the simple
+  framebuffer remains active.
+
 - display : phandle pointing to the primary display hardware node
 
 Example:
@@ -68,6 +72,7 @@  chosen {
 		stride = <(1600 * 2)>;
 		format = "r5g6b5";
 		clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
+		lcd-supply = <&reg_dc1sw>;
 		display = <&lcdc0>;
 	};
 	stdout-path = "display0";