diff mbox

[v4,08/16] drm: rockchip/dp: add rockchip platform dp driver

Message ID 1441087288-25404-1-git-send-email-ykk@rock-chips.com
State Under Review, archived
Headers show

Commit Message

Yakir Yang Sept. 1, 2015, 6:01 a.m. UTC
Rockchip have three clocks for dp controller, we leave pclk_edp
to analogix_dp driver control, and keep the sclk_edp_24m and
sclk_edp in platform driver.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v4:
- Remove some deprecated DT properties in rockchip dp document.

Changes in v3:
- Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
  dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
  core driver which name to "dp", and leave "pclk_edp" to rockchip dp platform
  driver which name to "pclk".
- Take Heiko suggest, add devicetree binding document.
- Take Heiko suggest, remove "rockchip,panel" DT property, take use of remote
  point to get panel node.
- Add the new function point analogix_dp_platdata.get_modes init.

Changes in v2:
- Take Heiko suggest, get panel node with remote-endpoint method,
  and create devicetree binding for driver.
- Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
  leave those clock to rockchip dp phy driver.

 .../bindings/video/analogix_dp-rockchip.txt        |  74 ++++
 drivers/gpu/drm/rockchip/Kconfig                   |   9 +
 drivers/gpu/drm/rockchip/Makefile                  |   1 +
 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 389 +++++++++++++++++++++
 4 files changed, 473 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
 create mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c

Comments

Heiko Stübner Sept. 1, 2015, 2:24 p.m. UTC | #1
Am Dienstag, 1. September 2015, 14:01:28 schrieb Yakir Yang:
> Rockchip have three clocks for dp controller, we leave pclk_edp
> to analogix_dp driver control, and keep the sclk_edp_24m and
> sclk_edp in platform driver.
> 
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> ---
> Changes in v4:
> - Remove some deprecated DT properties in rockchip dp document.
> 
> Changes in v3:
> - Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
>   dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
>   core driver which name to "dp", and leave "pclk_edp" to rockchip dp
> platform driver which name to "pclk".
> - Take Heiko suggest, add devicetree binding document.
> - Take Heiko suggest, remove "rockchip,panel" DT property, take use of
> remote point to get panel node.
> - Add the new function point analogix_dp_platdata.get_modes init.
> 
> Changes in v2:
> - Take Heiko suggest, get panel node with remote-endpoint method,
>   and create devicetree binding for driver.
> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
>   leave those clock to rockchip dp phy driver.
> 
>  .../bindings/video/analogix_dp-rockchip.txt        |  74 ++++
>  drivers/gpu/drm/rockchip/Kconfig                   |   9 +
>  drivers/gpu/drm/rockchip/Makefile                  |   1 +
>  drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 389
> +++++++++++++++++++++ 4 files changed, 473 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt create
> mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> 
> diff --git
> a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
> b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt new file
> mode 100644
> index 0000000..502483e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
> @@ -0,0 +1,74 @@
> +Rockchip RK3288 specific extensions to the Analogix Display Port
> +================================
> +
> +Required properties:
> +- compatible: "rockchip,rk3288-edp";
> +
> +- reg: physical base address of the controller and length
> +
> +- clocks: from common clock binding: handle to dp clock.
> +	  of memory mapped region.
> +
> +- clock-names: from common clock binding:
> +	       Required elements: "dp" "pclk"
> +
> +- resets: Must contain an entry for each entry in reset-names.
> +	  See ../reset/reset.txt for details.
> +
> +- reset-names: Must include the name "dp"
> +
> +- rockchip,grf: this soc should set GRF regs, so need get grf here.
> +
> +- ports: contain a port node with endpoint definitions as defined in
> +  Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +
> +For the below properties, please refer to Analogix DP binding document:
> + * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
> +- phys (required)
> +- phy-names (required)
> +- hpd-gpios (optional)
> +---------------------------------------------------------------------------
> ---- +
> +Example:
> +	dp-controller: dp@ff970000 {
> +		compatible = "rockchip,rk3288-dp";
> +		reg = <0xff970000 0x4000>;
> +		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
> +		clock-names = "dp", "pclk";
> +		phys = <&dp_phy>;
> +		phy-names = "dp";
> +
> +		rockchip,grf = <&grf>;
> +		resets = <&cru 111>;
> +		reset-names = "dp";
> +
> +		status = "disabled";
> +
> +		ports {
> +			edp_in: port {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				edp_in_vopb: endpoint@0 {
> +					reg = <0>;
> +					remote-endpoint = <&vopb_out_edp>;
> +				};
> +				edp_in_vopl: endpoint@1 {
> +					reg = <1>;
> +					remote-endpoint = <&vopl_out_edp>;
> +				};
> +			};
> +
> +			edp_out: port@1 {
> +				reg = <1>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				edp_out_panel: endpoint {
> +					reg = <0>;
> +					remote-endpoint = <&panel_in_edp>
> +				};
> +			};
> +		};
> +	};
> +
just a nit right now, because "git am" mentioned it:

git am \[PATCH\ v4\ 08_16\]\ drm_rockchip_dp_add\ rockchip\ platform\ dp\ 
driver.mbox 
[...]/linux-rockchip/.git/rebase-apply/patch:108: new blank line at EOF.
+

meaning you're adding an empty line at the end :-)


Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Yakir Yang Sept. 1, 2015, 2:48 p.m. UTC | #2
Hi Heiko,

在 2015/9/1 22:24, Heiko Stuebner 写道:
> Am Dienstag, 1. September 2015, 14:01:28 schrieb Yakir Yang:
>> Rockchip have three clocks for dp controller, we leave pclk_edp
>> to analogix_dp driver control, and keep the sclk_edp_24m and
>> sclk_edp in platform driver.
>>
>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>> ---
>> Changes in v4:
>> - Remove some deprecated DT properties in rockchip dp document.
>>
>> Changes in v3:
>> - Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
>>    dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
>>    core driver which name to "dp", and leave "pclk_edp" to rockchip dp
>> platform driver which name to "pclk".
>> - Take Heiko suggest, add devicetree binding document.
>> - Take Heiko suggest, remove "rockchip,panel" DT property, take use of
>> remote point to get panel node.
>> - Add the new function point analogix_dp_platdata.get_modes init.
>>
>> Changes in v2:
>> - Take Heiko suggest, get panel node with remote-endpoint method,
>>    and create devicetree binding for driver.
>> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
>>    leave those clock to rockchip dp phy driver.
>>
>>   .../bindings/video/analogix_dp-rockchip.txt        |  74 ++++
>>   drivers/gpu/drm/rockchip/Kconfig                   |   9 +
>>   drivers/gpu/drm/rockchip/Makefile                  |   1 +
>>   drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 389
>> +++++++++++++++++++++ 4 files changed, 473 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt create
>> mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>
>> diff --git
>> a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
>> b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt new file
>> mode 100644
>> index 0000000..502483e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
>> @@ -0,0 +1,74 @@
>> +Rockchip RK3288 specific extensions to the Analogix Display Port
>> +================================
>> +
>> +Required properties:
>> +- compatible: "rockchip,rk3288-edp";
>> +
>> +- reg: physical base address of the controller and length
>> +
>> +- clocks: from common clock binding: handle to dp clock.
>> +	  of memory mapped region.
>> +
>> +- clock-names: from common clock binding:
>> +	       Required elements: "dp" "pclk"
>> +
>> +- resets: Must contain an entry for each entry in reset-names.
>> +	  See ../reset/reset.txt for details.
>> +
>> +- reset-names: Must include the name "dp"
>> +
>> +- rockchip,grf: this soc should set GRF regs, so need get grf here.
>> +
>> +- ports: contain a port node with endpoint definitions as defined in
>> +  Documentation/devicetree/bindings/media/video-interfaces.txt.
>> +
>> +
>> +For the below properties, please refer to Analogix DP binding document:
>> + * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
>> +- phys (required)
>> +- phy-names (required)
>> +- hpd-gpios (optional)
>> +---------------------------------------------------------------------------
>> ---- +
>> +Example:
>> +	dp-controller: dp@ff970000 {
>> +		compatible = "rockchip,rk3288-dp";
>> +		reg = <0xff970000 0x4000>;
>> +		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>> +		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
>> +		clock-names = "dp", "pclk";
>> +		phys = <&dp_phy>;
>> +		phy-names = "dp";
>> +
>> +		rockchip,grf = <&grf>;
>> +		resets = <&cru 111>;
>> +		reset-names = "dp";
>> +
>> +		status = "disabled";
>> +
>> +		ports {
>> +			edp_in: port {
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				edp_in_vopb: endpoint@0 {
>> +					reg = <0>;
>> +					remote-endpoint = <&vopb_out_edp>;
>> +				};
>> +				edp_in_vopl: endpoint@1 {
>> +					reg = <1>;
>> +					remote-endpoint = <&vopl_out_edp>;
>> +				};
>> +			};
>> +
>> +			edp_out: port@1 {
>> +				reg = <1>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				edp_out_panel: endpoint {
>> +					reg = <0>;
>> +					remote-endpoint = <&panel_in_edp>
>> +				};
>> +			};
>> +		};
>> +	};
>> +
> just a nit right now, because "git am" mentioned it:
>
> git am \[PATCH\ v4\ 08_16\]\ drm_rockchip_dp_add\ rockchip\ platform\ dp\
> driver.mbox
> [...]/linux-rockchip/.git/rebase-apply/patch:108: new blank line at EOF.
> +
>
> meaning you're adding an empty line at the end :-)

Oh, thanks, I have saw this too when I apply this on linux-next
branch, but I haven't see the log very careful at that time, and
".git/rebase-apply/patch" just empty, so I just go ahead and
forget to fix this one.

Thanks for your remind,
  - Yakir

>
> Heiko
>
>
>


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Heiko Stübner Sept. 1, 2015, 9 p.m. UTC | #3
Hi Yakir,

Am Dienstag, 1. September 2015, 14:01:28 schrieb Yakir Yang:
> Rockchip have three clocks for dp controller, we leave pclk_edp
> to analogix_dp driver control, and keep the sclk_edp_24m and
> sclk_edp in platform driver.
> 
> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
> ---
> Changes in v4:
> - Remove some deprecated DT properties in rockchip dp document.
> 
> Changes in v3:
> - Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
>   dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
>   core driver which name to "dp", and leave "pclk_edp" to rockchip dp
> platform driver which name to "pclk".
> - Take Heiko suggest, add devicetree binding document.
> - Take Heiko suggest, remove "rockchip,panel" DT property, take use of
> remote point to get panel node.
> - Add the new function point analogix_dp_platdata.get_modes init.
> 
> Changes in v2:
> - Take Heiko suggest, get panel node with remote-endpoint method,
>   and create devicetree binding for driver.
> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
>   leave those clock to rockchip dp phy driver.
> 
>  .../bindings/video/analogix_dp-rockchip.txt        |  74 ++++
>  drivers/gpu/drm/rockchip/Kconfig                   |   9 +
>  drivers/gpu/drm/rockchip/Makefile                  |   1 +
>  drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 389
> +++++++++++++++++++++ 4 files changed, 473 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt create
> mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> 
> diff --git
> a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
> b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt new file
> mode 100644
> index 0000000..502483e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
> @@ -0,0 +1,74 @@
> +Rockchip RK3288 specific extensions to the Analogix Display Port
> +================================
> +
> +Required properties:
> +- compatible: "rockchip,rk3288-edp";
> +
> +- reg: physical base address of the controller and length
> +
> +- clocks: from common clock binding: handle to dp clock.
> +	  of memory mapped region.
> +
> +- clock-names: from common clock binding:
> +	       Required elements: "dp" "pclk"
> +
> +- resets: Must contain an entry for each entry in reset-names.
> +	  See ../reset/reset.txt for details.
> +
> +- reset-names: Must include the name "dp"
> +
> +- rockchip,grf: this soc should set GRF regs, so need get grf here.
> +
> +- ports: contain a port node with endpoint definitions as defined in
> +  Documentation/devicetree/bindings/media/video-interfaces.txt.
> +
> +
> +For the below properties, please refer to Analogix DP binding document:
> + * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
> +- phys (required)
> +- phy-names (required)
> +- hpd-gpios (optional)
> +---------------------------------------------------------------------------
> ---- +
> +Example:
> +	dp-controller: dp@ff970000 {
> +		compatible = "rockchip,rk3288-dp";
> +		reg = <0xff970000 0x4000>;
> +		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
> +		clock-names = "dp", "pclk";
> +		phys = <&dp_phy>;
> +		phy-names = "dp";
> +
> +		rockchip,grf = <&grf>;
> +		resets = <&cru 111>;
> +		reset-names = "dp";
> +
> +		status = "disabled";
> +
> +		ports {

#address-cells = <1>;
#size-cells = <0>;

> +			edp_in: port {

edp_in: port@0
	reg = <0>;

> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				edp_in_vopb: endpoint@0 {
> +					reg = <0>;
> +					remote-endpoint = <&vopb_out_edp>;
> +				};
> +				edp_in_vopl: endpoint@1 {
> +					reg = <1>;
> +					remote-endpoint = <&vopl_out_edp>;
> +				};
> +			};
> +
> +			edp_out: port@1 {
> +				reg = <1>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				edp_out_panel: endpoint {
> +					reg = <0>;
> +					remote-endpoint = <&panel_in_edp>
> +				};
> +			};
> +		};
> +	};
> +
> diff --git a/drivers/gpu/drm/rockchip/Kconfig
> b/drivers/gpu/drm/rockchip/Kconfig index 35215f6..c2ba945 100644
> --- a/drivers/gpu/drm/rockchip/Kconfig
> +++ b/drivers/gpu/drm/rockchip/Kconfig
> @@ -25,3 +25,12 @@ config ROCKCHIP_DW_HDMI
>  	  for the Synopsys DesignWare HDMI driver. If you want to
>  	  enable HDMI on RK3288 based SoC, you should selet this
>  	  option.
> +
> +config ROCKCHIP_ANALOGIX_DP
> +        tristate "Rockchip specific extensions for Analogix DP driver"
> +        depends on DRM_ROCKCHIP
> +        select DRM_ANALOGIX_DP
> +        help
> +	  This selects support for Rockchip SoC specific extensions
> +	  for the Analogix Core DP driver. If you want to enable DP
> +	  on RK3288 based SoC, you should selet this option.
> diff --git a/drivers/gpu/drm/rockchip/Makefile
> b/drivers/gpu/drm/rockchip/Makefile index f3d8a19..8ad01fb 100644
> --- a/drivers/gpu/drm/rockchip/Makefile
> +++ b/drivers/gpu/drm/rockchip/Makefile
> @@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o
> rockchip_drm_fbdev.o \ rockchip_drm_gem.o
> 
>  obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
> +obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
> 
>  obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c new file mode 100644
> index 0000000..cebff9e
> --- /dev/null
> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
> @@ -0,0 +1,389 @@
> +/*
> + * Rockchip SoC DP (Display Port) interface driver.
> + *
> + * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
> + * Author: Andy Yan <andy.yan@rock-chips.com>
> + *         Yakir Yang <ykk@rock-chips.com>
> + *         Jeff Chen <jeff.chen@rock-chips.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_dp_helper.h>
> +
> +#include <linux/component.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_graph.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include <linux/clk.h>
> +
> +#include <video/of_videomode.h>
> +#include <video/videomode.h>
> +
> +#include <drm/bridge/analogix_dp.h>
> +
> +#include "rockchip_drm_drv.h"
> +#include "rockchip_drm_vop.h"
> +
> +#define encoder_to_dp(c) \
> +		container_of(c, struct rockchip_dp_device, encoder)
> +
> +#define plat_data_to_dp(pd) \
> +		container_of(pd, struct rockchip_dp_device, plat_data)
> +
> +/* dp grf register offset */
> +#define GRF_GPIO7B_IOMUX                        0x0070
> +#define GPIO7B3_SEL_MASK                        (0x03 << 6)
> +#define GPIO7B3_SEL_EDP_HOTPLUG                 BIT(7)

please remove, see comment near pre_init


> +
> +#define GRF_SOC_CON6                            0x025c
> +#define GRF_EDP_LCD_SEL_MASK                    BIT(5)
> +#define GRF_EDP_SEL_VOP_LIT                     BIT(5)
> +#define GRF_EDP_SEL_VOP_BIG                     0
> +
> +struct rockchip_dp_device {
> +	struct drm_device        *drm_dev;
> +	struct device            *dev;
> +	struct drm_encoder       encoder;
> +	struct drm_display_mode  mode;
> +
> +	struct clk               *pclk;
> +	struct regmap            *grf;
> +	struct reset_control     *rst;
> +
> +	struct analogix_dp_plat_data plat_data;
> +};
> +
> +static int rockchip_dp_pre_init(struct rockchip_dp_device *dp)
> +{
> +	u32 val;
> +	int ret;
> +
> +	val = GPIO7B3_SEL_EDP_HOTPLUG | (GPIO7B3_SEL_MASK << 16);
> +	ret = regmap_write(dp->grf, GRF_GPIO7B_IOMUX, val);

this is just a regular pinctrl setting. Please don't write onto other 
components registers. Use a regular pinctrl setting in the devicetree instead.


> +	if (ret != 0) {
> +		dev_err(dp->dev, "Could not config GRF edp hpd: %d\n", ret);
> +		return ret;
> +	}
> +
> +	reset_control_assert(dp->rst);
> +	usleep_range(10, 20);
> +	reset_control_deassert(dp->rst);
> +
> +	return 0;
> +}


Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Yakir Yang Sept. 2, 2015, 1:52 a.m. UTC | #4
Hi Heiko,

在 09/02/2015 05:00 AM, Heiko Stuebner 写道:
> Hi Yakir,
>
> Am Dienstag, 1. September 2015, 14:01:28 schrieb Yakir Yang:
>> Rockchip have three clocks for dp controller, we leave pclk_edp
>> to analogix_dp driver control, and keep the sclk_edp_24m and
>> sclk_edp in platform driver.
>>
>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>> ---
>> Changes in v4:
>> - Remove some deprecated DT properties in rockchip dp document.
>>
>> Changes in v3:
>> - Take Thierry Reding and Heiko suggest, leave "sclk_edp_24m" to rockchip
>>    dp phy driver which name to "24m", and leave "sclk_edp" to analogix dp
>>    core driver which name to "dp", and leave "pclk_edp" to rockchip dp
>> platform driver which name to "pclk".
>> - Take Heiko suggest, add devicetree binding document.
>> - Take Heiko suggest, remove "rockchip,panel" DT property, take use of
>> remote point to get panel node.
>> - Add the new function point analogix_dp_platdata.get_modes init.
>>
>> Changes in v2:
>> - Take Heiko suggest, get panel node with remote-endpoint method,
>>    and create devicetree binding for driver.
>> - Remove the clock enable/disbale with "sclk_edp" & "sclk_edp_24m",
>>    leave those clock to rockchip dp phy driver.
>>
>>   .../bindings/video/analogix_dp-rockchip.txt        |  74 ++++
>>   drivers/gpu/drm/rockchip/Kconfig                   |   9 +
>>   drivers/gpu/drm/rockchip/Makefile                  |   1 +
>>   drivers/gpu/drm/rockchip/analogix_dp-rockchip.c    | 389
>> +++++++++++++++++++++ 4 files changed, 473 insertions(+)
>>   create mode 100644
>> Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt create
>> mode 100644 drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>>
>> diff --git
>> a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
>> b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt new file
>> mode 100644
>> index 0000000..502483e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
>> @@ -0,0 +1,74 @@
>> +Rockchip RK3288 specific extensions to the Analogix Display Port
>> +================================
>> +
>> +Required properties:
>> +- compatible: "rockchip,rk3288-edp";
>> +
>> +- reg: physical base address of the controller and length
>> +
>> +- clocks: from common clock binding: handle to dp clock.
>> +	  of memory mapped region.
>> +
>> +- clock-names: from common clock binding:
>> +	       Required elements: "dp" "pclk"
>> +
>> +- resets: Must contain an entry for each entry in reset-names.
>> +	  See ../reset/reset.txt for details.
>> +
>> +- reset-names: Must include the name "dp"
>> +
>> +- rockchip,grf: this soc should set GRF regs, so need get grf here.
>> +
>> +- ports: contain a port node with endpoint definitions as defined in
>> +  Documentation/devicetree/bindings/media/video-interfaces.txt.
>> +
>> +
>> +For the below properties, please refer to Analogix DP binding document:
>> + * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
>> +- phys (required)
>> +- phy-names (required)
>> +- hpd-gpios (optional)
>> +---------------------------------------------------------------------------
>> ---- +
>> +Example:
>> +	dp-controller: dp@ff970000 {
>> +		compatible = "rockchip,rk3288-dp";
>> +		reg = <0xff970000 0x4000>;
>> +		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>> +		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
>> +		clock-names = "dp", "pclk";
>> +		phys = <&dp_phy>;
>> +		phy-names = "dp";
>> +
>> +		rockchip,grf = <&grf>;
>> +		resets = <&cru 111>;
>> +		reset-names = "dp";
>> +
>> +		status = "disabled";
>> +
>> +		ports {
> #address-cells = <1>;
> #size-cells = <0>;

Done,

>> +			edp_in: port {
> edp_in: port@0
> 	reg = <0>;

Done,

>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				edp_in_vopb: endpoint@0 {
>> +					reg = <0>;
>> +					remote-endpoint = <&vopb_out_edp>;
>> +				};
>> +				edp_in_vopl: endpoint@1 {
>> +					reg = <1>;
>> +					remote-endpoint = <&vopl_out_edp>;
>> +				};
>> +			};
>> +
>> +			edp_out: port@1 {
>> +				reg = <1>;
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				edp_out_panel: endpoint {
>> +					reg = <0>;
>> +					remote-endpoint = <&panel_in_edp>
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>> diff --git a/drivers/gpu/drm/rockchip/Kconfig
>> b/drivers/gpu/drm/rockchip/Kconfig index 35215f6..c2ba945 100644
>> --- a/drivers/gpu/drm/rockchip/Kconfig
>> +++ b/drivers/gpu/drm/rockchip/Kconfig
>> @@ -25,3 +25,12 @@ config ROCKCHIP_DW_HDMI
>>   	  for the Synopsys DesignWare HDMI driver. If you want to
>>   	  enable HDMI on RK3288 based SoC, you should selet this
>>   	  option.
>> +
>> +config ROCKCHIP_ANALOGIX_DP
>> +        tristate "Rockchip specific extensions for Analogix DP driver"
>> +        depends on DRM_ROCKCHIP
>> +        select DRM_ANALOGIX_DP
>> +        help
>> +	  This selects support for Rockchip SoC specific extensions
>> +	  for the Analogix Core DP driver. If you want to enable DP
>> +	  on RK3288 based SoC, you should selet this option.
>> diff --git a/drivers/gpu/drm/rockchip/Makefile
>> b/drivers/gpu/drm/rockchip/Makefile index f3d8a19..8ad01fb 100644
>> --- a/drivers/gpu/drm/rockchip/Makefile
>> +++ b/drivers/gpu/drm/rockchip/Makefile
>> @@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o
>> rockchip_drm_fbdev.o \ rockchip_drm_gem.o
>>
>>   obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
>> +obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
>>
>>   obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
>> diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c new file mode 100644
>> index 0000000..cebff9e
>> --- /dev/null
>> +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
>> @@ -0,0 +1,389 @@
>> +/*
>> + * Rockchip SoC DP (Display Port) interface driver.
>> + *
>> + * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
>> + * Author: Andy Yan <andy.yan@rock-chips.com>
>> + *         Yakir Yang <ykk@rock-chips.com>
>> + *         Jeff Chen <jeff.chen@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +#include <drm/drmP.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_dp_helper.h>
>> +
>> +#include <linux/component.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/of_graph.h>
>> +#include <linux/regmap.h>
>> +#include <linux/reset.h>
>> +#include <linux/clk.h>
>> +
>> +#include <video/of_videomode.h>
>> +#include <video/videomode.h>
>> +
>> +#include <drm/bridge/analogix_dp.h>
>> +
>> +#include "rockchip_drm_drv.h"
>> +#include "rockchip_drm_vop.h"
>> +
>> +#define encoder_to_dp(c) \
>> +		container_of(c, struct rockchip_dp_device, encoder)
>> +
>> +#define plat_data_to_dp(pd) \
>> +		container_of(pd, struct rockchip_dp_device, plat_data)
>> +
>> +/* dp grf register offset */
>> +#define GRF_GPIO7B_IOMUX                        0x0070
>> +#define GPIO7B3_SEL_MASK                        (0x03 << 6)
>> +#define GPIO7B3_SEL_EDP_HOTPLUG                 BIT(7)
> please remove, see comment near pre_init

Okay,

>
>> +
>> +#define GRF_SOC_CON6                            0x025c
>> +#define GRF_EDP_LCD_SEL_MASK                    BIT(5)
>> +#define GRF_EDP_SEL_VOP_LIT                     BIT(5)
>> +#define GRF_EDP_SEL_VOP_BIG                     0
>> +
>> +struct rockchip_dp_device {
>> +	struct drm_device        *drm_dev;
>> +	struct device            *dev;
>> +	struct drm_encoder       encoder;
>> +	struct drm_display_mode  mode;
>> +
>> +	struct clk               *pclk;
>> +	struct regmap            *grf;
>> +	struct reset_control     *rst;
>> +
>> +	struct analogix_dp_plat_data plat_data;
>> +};
>> +
>> +static int rockchip_dp_pre_init(struct rockchip_dp_device *dp)
>> +{
>> +	u32 val;
>> +	int ret;
>> +
>> +	val = GPIO7B3_SEL_EDP_HOTPLUG | (GPIO7B3_SEL_MASK << 16);
>> +	ret = regmap_write(dp->grf, GRF_GPIO7B_IOMUX, val);
> this is just a regular pinctrl setting. Please don't write onto other
> components registers. Use a regular pinctrl setting in the devicetree instead.

Okay,

Thanks,
- Yakir

>
>> +	if (ret != 0) {
>> +		dev_err(dp->dev, "Could not config GRF edp hpd: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	reset_control_assert(dp->rst);
>> +	usleep_range(10, 20);
>> +	reset_control_deassert(dp->rst);
>> +
>> +	return 0;
>> +}
>
> Heiko
>
>
>


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
new file mode 100644
index 0000000..502483e
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
@@ -0,0 +1,74 @@ 
+Rockchip RK3288 specific extensions to the Analogix Display Port
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+	  of memory mapped region.
+
+- clock-names: from common clock binding:
+	       Required elements: "dp" "pclk"
+
+- resets: Must contain an entry for each entry in reset-names.
+	  See ../reset/reset.txt for details.
+
+- reset-names: Must include the name "dp"
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+- phys (required)
+- phy-names (required)
+- hpd-gpios (optional)
+-------------------------------------------------------------------------------
+
+Example:
+	dp-controller: dp@ff970000 {
+		compatible = "rockchip,rk3288-dp";
+		reg = <0xff970000 0x4000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+		clock-names = "dp", "pclk";
+		phys = <&dp_phy>;
+		phy-names = "dp";
+
+		rockchip,grf = <&grf>;
+		resets = <&cru 111>;
+		reset-names = "dp";
+
+		status = "disabled";
+
+		ports {
+			edp_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				edp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_edp>;
+				};
+				edp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_edp>;
+				};
+			};
+
+			edp_out: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				edp_out_panel: endpoint {
+					reg = <0>;
+					remote-endpoint = <&panel_in_edp>
+				};
+			};
+		};
+	};
+
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 35215f6..c2ba945 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,12 @@  config ROCKCHIP_DW_HDMI
 	  for the Synopsys DesignWare HDMI driver. If you want to
 	  enable HDMI on RK3288 based SoC, you should selet this
 	  option.
+
+config ROCKCHIP_ANALOGIX_DP
+        tristate "Rockchip specific extensions for Analogix DP driver"
+        depends on DRM_ROCKCHIP
+        select DRM_ANALOGIX_DP
+        help
+	  This selects support for Rockchip SoC specific extensions
+	  for the Analogix Core DP driver. If you want to enable DP
+	  on RK3288 based SoC, you should selet this option.
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index f3d8a19..8ad01fb 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@  rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \
 		rockchip_drm_gem.o
 
 obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_ANALOGIX_DP) += analogix_dp-rockchip.o
 
 obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
new file mode 100644
index 0000000..cebff9e
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -0,0 +1,389 @@ 
+/*
+ * Rockchip SoC DP (Display Port) interface driver.
+ *
+ * Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
+ * Author: Andy Yan <andy.yan@rock-chips.com>
+ *         Yakir Yang <ykk@rock-chips.com>
+ *         Jeff Chen <jeff.chen@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_of.h>
+#include <drm/drm_dp_helper.h>
+
+#include <linux/component.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_graph.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/clk.h>
+
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+#include <drm/bridge/analogix_dp.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define encoder_to_dp(c) \
+		container_of(c, struct rockchip_dp_device, encoder)
+
+#define plat_data_to_dp(pd) \
+		container_of(pd, struct rockchip_dp_device, plat_data)
+
+/* dp grf register offset */
+#define GRF_GPIO7B_IOMUX                        0x0070
+#define GPIO7B3_SEL_MASK                        (0x03 << 6)
+#define GPIO7B3_SEL_EDP_HOTPLUG                 BIT(7)
+
+#define GRF_SOC_CON6                            0x025c
+#define GRF_EDP_LCD_SEL_MASK                    BIT(5)
+#define GRF_EDP_SEL_VOP_LIT                     BIT(5)
+#define GRF_EDP_SEL_VOP_BIG                     0
+
+struct rockchip_dp_device {
+	struct drm_device        *drm_dev;
+	struct device            *dev;
+	struct drm_encoder       encoder;
+	struct drm_display_mode  mode;
+
+	struct clk               *pclk;
+	struct regmap            *grf;
+	struct reset_control     *rst;
+
+	struct analogix_dp_plat_data plat_data;
+};
+
+static int rockchip_dp_pre_init(struct rockchip_dp_device *dp)
+{
+	u32 val;
+	int ret;
+
+	val = GPIO7B3_SEL_EDP_HOTPLUG | (GPIO7B3_SEL_MASK << 16);
+	ret = regmap_write(dp->grf, GRF_GPIO7B_IOMUX, val);
+	if (ret != 0) {
+		dev_err(dp->dev, "Could not config GRF edp hpd: %d\n", ret);
+		return ret;
+	}
+
+	reset_control_assert(dp->rst);
+	usleep_range(10, 20);
+	reset_control_deassert(dp->rst);
+
+	return 0;
+}
+
+static int rockchip_dp_poweron(struct analogix_dp_plat_data *plat_data)
+{
+	struct rockchip_dp_device *dp = plat_data_to_dp(plat_data);
+	int ret;
+
+	ret = clk_prepare_enable(dp->pclk);
+	if (ret < 0) {
+		dev_err(dp->dev, "failed to enable pclk %d\n", ret);
+		return ret;
+	}
+
+	ret = rockchip_dp_pre_init(dp);
+	if (ret < 0) {
+		dev_err(dp->dev, "failed to dp pre init %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rockchip_dp_powerdown(struct analogix_dp_plat_data *plat_data)
+{
+	struct rockchip_dp_device *dp = plat_data_to_dp(plat_data);
+
+	clk_disable_unprepare(dp->pclk);
+
+	return 0;
+}
+
+static bool
+rockchip_dp_drm_encoder_mode_fixup(struct drm_encoder *encoder,
+				   const struct drm_display_mode *mode,
+				   struct drm_display_mode *adjusted_mode)
+{
+	/* do nothing */
+	return true;
+}
+
+static void rockchip_dp_drm_encoder_mode_set(struct drm_encoder *encoder,
+					     struct drm_display_mode *mode,
+					     struct drm_display_mode *adjusted)
+{
+	/* do nothing */
+}
+
+static void rockchip_dp_drm_encoder_prepare(struct drm_encoder *encoder)
+{
+	struct rockchip_dp_device *dp = encoder_to_dp(encoder);
+	u32 val;
+	int ret;
+
+	ret = rockchip_drm_crtc_mode_config(encoder->crtc,
+					    DRM_MODE_CONNECTOR_eDP,
+					    ROCKCHIP_OUT_MODE_AAAA);
+	if (ret < 0) {
+		dev_err(dp->dev, "Could not set crtc mode config: %d.\n", ret);
+		return;
+	}
+
+	ret = rockchip_drm_encoder_get_mux_id(dp->dev->of_node, encoder);
+	if (ret < 0)
+		return;
+
+	if (ret)
+		val = GRF_EDP_SEL_VOP_LIT | (GRF_EDP_LCD_SEL_MASK << 16);
+	else
+		val = GRF_EDP_SEL_VOP_BIG | (GRF_EDP_LCD_SEL_MASK << 16);
+
+	dev_dbg(dp->dev, "vop %s output to dp\n", (ret) ? "LIT" : "BIG");
+
+	ret = regmap_write(dp->grf, GRF_SOC_CON6, val);
+	if (ret != 0) {
+		dev_err(dp->dev, "Could not write to GRF: %d\n", ret);
+		return;
+	}
+}
+
+static void rockchip_dp_drm_encoder_nop(struct drm_encoder *encoder)
+{
+	/* do nothing */
+}
+
+static struct drm_encoder_helper_funcs rockchip_dp_encoder_helper_funcs = {
+	.mode_fixup = rockchip_dp_drm_encoder_mode_fixup,
+	.mode_set = rockchip_dp_drm_encoder_mode_set,
+	.prepare = rockchip_dp_drm_encoder_prepare,
+	.commit = rockchip_dp_drm_encoder_nop,
+	.disable = rockchip_dp_drm_encoder_nop,
+};
+
+static void rockchip_dp_drm_encoder_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static struct drm_encoder_funcs rockchip_dp_encoder_funcs = {
+	.destroy = rockchip_dp_drm_encoder_destroy,
+};
+
+static int rockchip_dp_init(struct rockchip_dp_device *dp)
+{
+	struct device *dev = dp->dev;
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	if (IS_ERR(dp->grf)) {
+		dev_err(dev, "failed to get rockchip,grf property\n");
+		return PTR_ERR(dp->grf);
+	}
+
+	dp->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(dp->pclk)) {
+		dev_err(dev, "failed to get pclk property\n");
+		return PTR_ERR(dp->pclk);
+	}
+
+	dp->rst = devm_reset_control_get(dev, "dp");
+	if (IS_ERR(dp->rst)) {
+		dev_err(dev, "failed to get dp reset control\n");
+		return PTR_ERR(dp->rst);
+	}
+
+	ret = clk_prepare_enable(dp->pclk);
+	if (ret < 0) {
+		dev_err(dp->dev, "failed to enable pclk %d\n", ret);
+		return ret;
+	}
+
+	ret = rockchip_dp_pre_init(dp);
+	if (ret < 0) {
+		dev_err(dp->dev, "failed to pre init %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rockchip_dp_drm_create_encoder(struct rockchip_dp_device *dp)
+{
+	struct drm_encoder *encoder = &dp->encoder;
+	struct drm_device *drm_dev = dp->drm_dev;
+	struct device *dev = dp->dev;
+	int ret;
+
+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
+							     dev->of_node);
+	DRM_DEBUG_KMS("possible_crtcs = 0x%x\n", encoder->possible_crtcs);
+
+	ret = drm_encoder_init(drm_dev, encoder, &rockchip_dp_encoder_funcs,
+			       DRM_MODE_ENCODER_TMDS);
+	if (ret) {
+		DRM_ERROR("failed to initialize encoder with drm\n");
+		return ret;
+	}
+
+	drm_encoder_helper_add(encoder, &rockchip_dp_encoder_helper_funcs);
+
+	return 0;
+}
+
+static int rockchip_dp_bind(struct device *dev, struct device *master,
+			    void *data)
+{
+	struct rockchip_dp_device *dp = dev_get_drvdata(dev);
+	struct drm_device *drm_dev = data;
+	int ret;
+
+	/*
+	 * Just like the probe function said, we don't need the
+	 * device drvrate anymore, we should leave the charge to
+	 * analogix dp driver, set the device drvdata to NULL.
+	 */
+	dev_set_drvdata(dev, NULL);
+
+	ret = rockchip_dp_init(dp);
+	if (ret < 0)
+		return ret;
+
+	dp->drm_dev = drm_dev;
+
+	ret = rockchip_dp_drm_create_encoder(dp);
+	if (ret) {
+		DRM_ERROR("failed to create drm encoder\n");
+		return ret;
+	}
+
+	dp->plat_data.attach = NULL;
+	dp->plat_data.get_modes = NULL;
+	dp->plat_data.power_on = rockchip_dp_poweron;
+	dp->plat_data.power_off = rockchip_dp_powerdown;
+
+	return analogix_dp_bind(dev, dp->drm_dev, &dp->encoder,
+				&dp->plat_data);
+}
+
+static void rockchip_dp_unbind(struct device *dev, struct device *master,
+			       void *data)
+{
+	return analogix_dp_unbind(dev, master, data);
+}
+
+static const struct component_ops rockchip_dp_component_ops = {
+	.bind = rockchip_dp_bind,
+	.unbind = rockchip_dp_unbind,
+};
+
+static int rockchip_dp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *panel_node, *port, *endpoint;
+	struct rockchip_dp_device *dp;
+	struct drm_panel *panel;
+
+	port = of_graph_get_port_by_id(dev->of_node, 1);
+	if (!port) {
+		dev_err(dev, "can't find output port\n");
+		return -EINVAL;
+	}
+
+	endpoint = of_get_child_by_name(port, "endpoint");
+	of_node_put(port);
+	if (!endpoint) {
+		dev_err(dev, "no output endpoint found\n");
+		return -EINVAL;
+	}
+
+	panel_node = of_graph_get_remote_port_parent(endpoint);
+	of_node_put(endpoint);
+	if (!panel_node) {
+		dev_err(dev, "no output node found\n");
+		return -EINVAL;
+	}
+
+	panel = of_drm_find_panel(panel_node);
+	if (!panel) {
+		DRM_ERROR("failed to find panel\n");
+		of_node_put(panel_node);
+		return -EPROBE_DEFER;
+	}
+
+	of_node_put(panel_node);
+
+	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+
+	dp->dev = dev;
+
+	dp->plat_data.panel = panel;
+
+	/*
+	 * We just use the drvdata until driver run into component
+	 * add function, and then we would set drvdata to null, so
+	 * that analogix dp driver could take charge of the drvdata.
+	 */
+	platform_set_drvdata(pdev, dp);
+
+	return component_add(dev, &rockchip_dp_component_ops);
+}
+
+static int rockchip_dp_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &rockchip_dp_component_ops);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rockchip_dp_suspend(struct device *dev)
+{
+	return analogix_dp_suspend(dev);
+}
+
+static int rockchip_dp_resume(struct device *dev)
+{
+	return analogix_dp_resume(dev);
+}
+#endif
+
+static const struct dev_pm_ops rockchip_dp_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(rockchip_dp_suspend, rockchip_dp_resume)
+};
+
+static const struct of_device_id rockchip_dp_dt_ids[] = {
+	{.compatible = "rockchip,rk3288-dp",},
+	{}
+};
+MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
+
+static struct platform_driver rockchip_dp_driver = {
+	.probe = rockchip_dp_probe,
+	.remove = rockchip_dp_remove,
+	.driver = {
+		   .name = "rockchip-dp",
+		   .owner = THIS_MODULE,
+		   .pm = &rockchip_dp_pm_ops,
+		   .of_match_table = of_match_ptr(rockchip_dp_dt_ids),
+	},
+};
+
+module_platform_driver(rockchip_dp_driver);
+
+MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
+MODULE_AUTHOR("Jeff chen <jeff.chen@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip Specific Analogix-DP Driver Extension");
+MODULE_LICENSE("GPL v2");