Message ID | 1430901427-65146-2-git-send-email-eddie.huang@mediatek.com |
---|---|
State | Superseded, archived |
Headers | show |
On Wed, May 06, 2015 at 04:37:05PM +0800, Eddie Huang wrote: > From: Xudong Chen <xudong.chen@mediatek.com> > > Add devicetree bindings for Mediatek Soc I2C driver. > > Signed-off-by: Xudong Chen <xudong.chen@mediatek.com> > Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Sascha, Uwe: Can you ack these patches if you are fine with them? Would be nice since you did quite some review and were involved in the "have-pmic" binding discussion. Thanks, Wolfram > --- > .../devicetree/bindings/i2c/i2c-mt6577.txt | 41 ++++++++++++++++++++++ > 1 file changed, 41 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt > new file mode 100644 > index 0000000..0ce6fa3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt > @@ -0,0 +1,41 @@ > +* Mediatek's I2C controller > + > +The Mediatek's I2C controller is used to interface with I2C devices. > + > +Required properties: > + - compatible: value should be either of the following. > + (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c. > + (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c. > + (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c. > + (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c. > + (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c. > + - reg: physical base address of the controller and dma base, length of memory > + mapped region. > + - interrupts: interrupt number to the cpu. > + - clock-div: the fixed value for frequency divider of clock source in i2c > + module. Each IC may be different. > + - clocks: clock name from clock manager > + - clock-names: Must include "main" and "dma", if enable have-pmic need include > + "pmic" extra. > + > +Optional properties: > + - clock-frequency: Frequency in Hz of the bus when transfer, the default value > + is 100000. > + - mediatek,have-pmic: platform can control i2c form special pmic side. > + Only mt6589 and mt8135 support this feature. > + - mediatek,use-push-pull: IO config use push-pull mode. > + > +Example: > + > + i2c0: i2c@1100d000 { > + compatible = "mediatek,mt6577-i2c"; > + reg = <0x1100d000 0x70>, > + <0x11000300 0x80>; > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; > + clock-frequency = <400000>; > + mediatek,have-pmic; > + clock-div = <16>; > + clocks = <&i2c0_ck>, <&ap_dma_ck>; > + clock-names = "main", "dma"; > + }; > + > -- > 1.8.1.1.dirty > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Wolfram, On Tue, May 12, 2015 at 02:37:09PM +0200, wsa@the-dreams.de wrote: > On Wed, May 06, 2015 at 04:37:05PM +0800, Eddie Huang wrote: > > From: Xudong Chen <xudong.chen@mediatek.com> > > > > Add devicetree bindings for Mediatek Soc I2C driver. > > > > Signed-off-by: Xudong Chen <xudong.chen@mediatek.com> > > Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> > > Sascha, Uwe: Can you ack these patches if you are fine with them? > Would be nice since you did quite some review and were involved in the > "have-pmic" binding discussion. Just did that. That code went through enough reviews. Sascha
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt new file mode 100644 index 0000000..0ce6fa3 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt @@ -0,0 +1,41 @@ +* Mediatek's I2C controller + +The Mediatek's I2C controller is used to interface with I2C devices. + +Required properties: + - compatible: value should be either of the following. + (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c. + (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c. + (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c. + (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c. + (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c. + - reg: physical base address of the controller and dma base, length of memory + mapped region. + - interrupts: interrupt number to the cpu. + - clock-div: the fixed value for frequency divider of clock source in i2c + module. Each IC may be different. + - clocks: clock name from clock manager + - clock-names: Must include "main" and "dma", if enable have-pmic need include + "pmic" extra. + +Optional properties: + - clock-frequency: Frequency in Hz of the bus when transfer, the default value + is 100000. + - mediatek,have-pmic: platform can control i2c form special pmic side. + Only mt6589 and mt8135 support this feature. + - mediatek,use-push-pull: IO config use push-pull mode. + +Example: + + i2c0: i2c@1100d000 { + compatible = "mediatek,mt6577-i2c"; + reg = <0x1100d000 0x70>, + <0x11000300 0x80>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; + clock-frequency = <400000>; + mediatek,have-pmic; + clock-div = <16>; + clocks = <&i2c0_ck>, <&ap_dma_ck>; + clock-names = "main", "dma"; + }; +