diff mbox

[v5,08/12] mfd: axp20x: Add AXP22x regulator information to DT bindings

Message ID 1425988764-23618-9-git-send-email-wens@csie.org
State Superseded, archived
Headers show

Commit Message

Chen-Yu Tsai March 10, 2015, 11:59 a.m. UTC
Add the list of regulators for AXP22x to the DT bindings.
This includes the names and supply names.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 Documentation/devicetree/bindings/mfd/axp20x.txt | 27 ++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

Comments

Lee Jones March 23, 2015, 11:54 a.m. UTC | #1
On Tue, 10 Mar 2015, Chen-Yu Tsai wrote:

> Add the list of regulators for AXP22x to the DT bindings.
> This includes the names and supply names.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  Documentation/devicetree/bindings/mfd/axp20x.txt | 27 ++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
> index 3914a3f91ff6..0fc2f1f35cef 100644
> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt
> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
> @@ -49,6 +49,33 @@ LDO3		: LDO		: ldo3in-supply
>  LDO4		: LDO		: ldo24in-supply	: shared supply
>  LDO5		: LDO		: ldo5in-supply
>  
> +

Nit: I'm not keen on double line spacing.

> +AXP221 regulators, type, and corresponding input supply names:
> +
> +Regulator	  Type		  Supply Name		  Notes
> +---------	  ----		  -----------		  -----
> +DCDC1		: DC-DC buck	: vin1-supply
> +DCDC2		: DC-DC buck	: vin2-supply
> +DCDC3		: DC-DC	buck	: vin3-supply
> +DCDC4		: DC-DC	buck	: vin4-supply
> +DCDC5		: DC-DC	buck	: vin5-supply
> +DC1SW		: On/Off Switch	: dcdc1-supply		: DCDC1 secondary output
> +DC5LDO		: LDO		: dcdc5-supply		: input from DCDC5
> +ALDO1		: LDO		: aldoin-supply		: shared supply
> +ALDO2		: LDO		: aldoin-supply		: shared supply
> +ALDO3		: LDO		: aldoin-supply		: shared supply
> +DLDO1		: LDO		: dldoin-supply		: shared supply
> +DLDO2		: LDO		: dldoin-supply		: shared supply
> +DLDO3		: LDO		: dldoin-supply		: shared supply
> +DLDO4		: LDO		: dldoin-supply		: shared supply
> +ELDO1		: LDO		: eldoin-supply		: shared supply
> +ELDO2		: LDO		: eldoin-supply		: shared supply
> +ELDO3		: LDO		: eldoin-supply		: shared supply
> +LDO_IO0		: LDO		: ips-supply		: GPIO 0
> +LDO_IO1		: LDO		: ips-supply		: GPIO 1
> +RTC_LDO		: LDO		: ips-supply		: always on
> +
> +

Nit: I'm not keen on double line spacing.

>  Example:
>  
>  axp209: pmic@34 {
Chen-Yu Tsai March 23, 2015, 5:43 p.m. UTC | #2
On Mon, Mar 23, 2015 at 4:54 AM, Lee Jones <lee.jones@linaro.org> wrote:
> On Tue, 10 Mar 2015, Chen-Yu Tsai wrote:
>
>> Add the list of regulators for AXP22x to the DT bindings.
>> This includes the names and supply names.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>>  Documentation/devicetree/bindings/mfd/axp20x.txt | 27 ++++++++++++++++++++++++
>>  1 file changed, 27 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
>> index 3914a3f91ff6..0fc2f1f35cef 100644
>> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt
>> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
>> @@ -49,6 +49,33 @@ LDO3               : LDO           : ldo3in-supply
>>  LDO4         : LDO           : ldo24in-supply        : shared supply
>>  LDO5         : LDO           : ldo5in-supply
>>
>> +
>
> Nit: I'm not keen on double line spacing.
>
>> +AXP221 regulators, type, and corresponding input supply names:
>> +
>> +Regulator      Type            Supply Name             Notes
>> +---------      ----            -----------             -----
>> +DCDC1                : DC-DC buck    : vin1-supply
>> +DCDC2                : DC-DC buck    : vin2-supply
>> +DCDC3                : DC-DC buck    : vin3-supply
>> +DCDC4                : DC-DC buck    : vin4-supply
>> +DCDC5                : DC-DC buck    : vin5-supply
>> +DC1SW                : On/Off Switch : dcdc1-supply          : DCDC1 secondary output
>> +DC5LDO               : LDO           : dcdc5-supply          : input from DCDC5
>> +ALDO1                : LDO           : aldoin-supply         : shared supply
>> +ALDO2                : LDO           : aldoin-supply         : shared supply
>> +ALDO3                : LDO           : aldoin-supply         : shared supply
>> +DLDO1                : LDO           : dldoin-supply         : shared supply
>> +DLDO2                : LDO           : dldoin-supply         : shared supply
>> +DLDO3                : LDO           : dldoin-supply         : shared supply
>> +DLDO4                : LDO           : dldoin-supply         : shared supply
>> +ELDO1                : LDO           : eldoin-supply         : shared supply
>> +ELDO2                : LDO           : eldoin-supply         : shared supply
>> +ELDO3                : LDO           : eldoin-supply         : shared supply
>> +LDO_IO0              : LDO           : ips-supply            : GPIO 0
>> +LDO_IO1              : LDO           : ips-supply            : GPIO 1
>> +RTC_LDO              : LDO           : ips-supply            : always on
>> +
>> +
>
> Nit: I'm not keen on double line spacing.

Ok. I can get rid of them. IMHO it makes different sections clearer though.
I assume you don't want them in the original axp20x patches either?

ChenYu

>>  Example:
>>
>>  axp209: pmic@34 {
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index 3914a3f91ff6..0fc2f1f35cef 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -49,6 +49,33 @@  LDO3		: LDO		: ldo3in-supply
 LDO4		: LDO		: ldo24in-supply	: shared supply
 LDO5		: LDO		: ldo5in-supply
 
+
+AXP221 regulators, type, and corresponding input supply names:
+
+Regulator	  Type		  Supply Name		  Notes
+---------	  ----		  -----------		  -----
+DCDC1		: DC-DC buck	: vin1-supply
+DCDC2		: DC-DC buck	: vin2-supply
+DCDC3		: DC-DC	buck	: vin3-supply
+DCDC4		: DC-DC	buck	: vin4-supply
+DCDC5		: DC-DC	buck	: vin5-supply
+DC1SW		: On/Off Switch	: dcdc1-supply		: DCDC1 secondary output
+DC5LDO		: LDO		: dcdc5-supply		: input from DCDC5
+ALDO1		: LDO		: aldoin-supply		: shared supply
+ALDO2		: LDO		: aldoin-supply		: shared supply
+ALDO3		: LDO		: aldoin-supply		: shared supply
+DLDO1		: LDO		: dldoin-supply		: shared supply
+DLDO2		: LDO		: dldoin-supply		: shared supply
+DLDO3		: LDO		: dldoin-supply		: shared supply
+DLDO4		: LDO		: dldoin-supply		: shared supply
+ELDO1		: LDO		: eldoin-supply		: shared supply
+ELDO2		: LDO		: eldoin-supply		: shared supply
+ELDO3		: LDO		: eldoin-supply		: shared supply
+LDO_IO0		: LDO		: ips-supply		: GPIO 0
+LDO_IO1		: LDO		: ips-supply		: GPIO 1
+RTC_LDO		: LDO		: ips-supply		: always on
+
+
 Example:
 
 axp209: pmic@34 {