Message ID | 1425864191-4121-3-git-send-email-beomho.seo@samsung.com |
---|---|
State | Needs Review / ACK, archived |
Headers | show |
Context | Check | Description |
---|---|---|
robh/checkpatch | warning | total: 1 errors, 1 warnings, 0 lines checked |
robh/patch-applied | success |
FAO Mark, > This patch device tree binding documentation for rt5033 multifunction device. > > Cc: Sebastian Reichel <sre@kernel.org> > Cc: Lee Jones <lee.jones@linaro.org> > Cc: Mark Brown <broonie@kernel.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Ian campbell <ijc+devicetree@hellion.org.uk> > Cc: Kumar Gala <galak@codeaurora.org> > Signed-off-by: Beomho Seo <beomho.seo@samsung.com> > Acked-by: Chanwoo Choi <cw00.choi@samsung.com> > --- > Changes in v5 > - Remove wrong Acked-by. > Changes in v4 > - none. > Changes in v3 > - Add Acked-by > Changes in v2 > - Fix incorrect typo. > - Align -uamp and -uvolt names with regulator binding suffixes. > - Drop incorrect phandle. > - Fix incorrect example. > --- > Documentation/devicetree/bindings/mfd/rt5033.txt | 101 ++++++++++++++++++++ [...] > .../devicetree/bindings/vendor-prefixes.txt | 1 + This change will be low resistance. I suggest you separate it out into another patch. > 2 files changed, 102 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/rt5033.txt > > diff --git a/Documentation/devicetree/bindings/mfd/rt5033.txt b/Documentation/devicetree/bindings/mfd/rt5033.txt > new file mode 100644 > index 0000000..64b23e8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/rt5033.txt > @@ -0,0 +1,101 @@ > +Richtek RT5033 Power management Integrated Circuit > + > +RT5033 is a Multifunction device which includes battery charger, fuel gauge, > +flash LED current source, LDO and synchronous Buck converter for portable > +applications. It is interfaced to host controller using i2c interface. > + > +Required properties: > +- compatible : Must be "richtek,rt5033" > +- reg : Specifies the i2c slave address of general part. > +- interrupts : This i2c devices has an IRQ line connected to the main SoC. > +- interrupt-parent : The parent interrupt controller. > + > +Optional node: > +Regulators: The regulators of RT5033 have to be instantiated under sub-node > +named "regulators" using the following format. > + > + regulators { > + regulator-name { > + regulator-name = LDO/BUCK > + regulator subnodes called X, Y and Z > + }; > + }; > + refer Documentation/devicetree/bindings/regulator/regulator.txt > + > + > +Battery charger: There battery charger of RT5033 have to be instantiated under > +sub-node named "charger" using the following format. > + > +Required properties: > +- compatible : Must be "richtek,rt5033-charger". > +- richtek,pre-uamp : Current of pre-charge mode. The pre-charge current levels > + are 350 mA to 650 mA programmed by I2C per 100 mA. > +- richtek,fast-uamp : Current of fast-charge mode. The fast-charge current > + levels are 700 mA to 2000 mA programmed by I2C per 100 mA. > +- richtek,eoc-uamp : This property is end of charge current. Its level 150 mA > + to 200 mA. > +- richtek,pre-threshold-uvolt : Voltage of threshold pre-charge mode. Battery > + voltage is below pre-charge threshold voltage, the charger is in pre-charge > + mode with pre-charge current. Its levels are 2.3 V to 3.8 V programmed > + by I2C per 0.1 V. > +- richtek,const-uvolt : Battery regulation voltage of constant voltage mode. > + This voltage level 3.65 V to 4.4 V bye I2C per 0.025 V. These require a Regulator (or Charger?) Ack. > + charger { > + compatible = "richtek,rt5033-charger"; > + richtek,pre-uamp = <350000>; > + richtek,fast-uamp = <2000000>; > + richtek,eoc-uamp = <250000>; > + richtek,pre-threshold-uvolt = <3400000>; > + richtek,const-uvolt = <4350000>; > + > + }; > + > + > +Fuelgauge: There fuelgauge of RT5033 to be instantiated node named "fuelgauge" > +using the following format. > + > +Required properties: > +- compatible = Must be "richtek,rt5033-battery". > + > + rt5033@35 { > + compatible = "richtek,rt5033-battery"; > + interrupt-parent = <&gpx2>; > + interrupts = <3 0>; > + reg = <0x35>; > + }; > + > +Example: > + > + rt5033@34 { > + compatible = "richtek,rt5033"; > + reg = <0x34>; > + interrupt-parent = <&gpx1>; > + interrupts = <5 0>; > + > + regulators { > + buck_reg: BUCK { > + regulator-name = "BUCK"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + }; > + > + charger { > + compatible = "richtek,rt5033-charger"; > + richtek,pre-uamp = <350000>; > + richtek,fast-uamp = <2000000>; > + richtek,eoc-uamp = <250000>; > + richtek,pre-threshold-uvolt = <3400000>; > + richtek,const-uvolt = <4350000>; > + }; > + > + }; > + > + rt5033@35 { > + compatible = "richtek,rt5033-battery"; > + interrupt-parent = <&gpx2>; > + interrupts = <3 0>; > + reg = <0x35>; > + }; > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 389ca13..73d235a 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -149,6 +149,7 @@ ralink Mediatek/Ralink Technology Corp. > ramtron Ramtron International > realtek Realtek Semiconductor Corp. > renesas Renesas Electronics Corporation > +richtek Richtek Technology Corporation > ricoh Ricoh Co. Ltd. > rockchip Fuzhou Rockchip Electronics Co., Ltd > samsung Samsung Semiconductor
diff --git a/Documentation/devicetree/bindings/mfd/rt5033.txt b/Documentation/devicetree/bindings/mfd/rt5033.txt new file mode 100644 index 0000000..64b23e8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rt5033.txt @@ -0,0 +1,101 @@ +Richtek RT5033 Power management Integrated Circuit + +RT5033 is a Multifunction device which includes battery charger, fuel gauge, +flash LED current source, LDO and synchronous Buck converter for portable +applications. It is interfaced to host controller using i2c interface. + +Required properties: +- compatible : Must be "richtek,rt5033" +- reg : Specifies the i2c slave address of general part. +- interrupts : This i2c devices has an IRQ line connected to the main SoC. +- interrupt-parent : The parent interrupt controller. + +Optional node: +Regulators: The regulators of RT5033 have to be instantiated under sub-node +named "regulators" using the following format. + + regulators { + regulator-name { + regulator-name = LDO/BUCK + regulator subnodes called X, Y and Z + }; + }; + refer Documentation/devicetree/bindings/regulator/regulator.txt + + +Battery charger: There battery charger of RT5033 have to be instantiated under +sub-node named "charger" using the following format. + +Required properties: +- compatible : Must be "richtek,rt5033-charger". +- richtek,pre-uamp : Current of pre-charge mode. The pre-charge current levels + are 350 mA to 650 mA programmed by I2C per 100 mA. +- richtek,fast-uamp : Current of fast-charge mode. The fast-charge current + levels are 700 mA to 2000 mA programmed by I2C per 100 mA. +- richtek,eoc-uamp : This property is end of charge current. Its level 150 mA + to 200 mA. +- richtek,pre-threshold-uvolt : Voltage of threshold pre-charge mode. Battery + voltage is below pre-charge threshold voltage, the charger is in pre-charge + mode with pre-charge current. Its levels are 2.3 V to 3.8 V programmed + by I2C per 0.1 V. +- richtek,const-uvolt : Battery regulation voltage of constant voltage mode. + This voltage level 3.65 V to 4.4 V bye I2C per 0.025 V. + + charger { + compatible = "richtek,rt5033-charger"; + richtek,pre-uamp = <350000>; + richtek,fast-uamp = <2000000>; + richtek,eoc-uamp = <250000>; + richtek,pre-threshold-uvolt = <3400000>; + richtek,const-uvolt = <4350000>; + + }; + + +Fuelgauge: There fuelgauge of RT5033 to be instantiated node named "fuelgauge" +using the following format. + +Required properties: +- compatible = Must be "richtek,rt5033-battery". + + rt5033@35 { + compatible = "richtek,rt5033-battery"; + interrupt-parent = <&gpx2>; + interrupts = <3 0>; + reg = <0x35>; + }; + +Example: + + rt5033@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + + regulators { + buck_reg: BUCK { + regulator-name = "BUCK"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + }; + + charger { + compatible = "richtek,rt5033-charger"; + richtek,pre-uamp = <350000>; + richtek,fast-uamp = <2000000>; + richtek,eoc-uamp = <250000>; + richtek,pre-threshold-uvolt = <3400000>; + richtek,const-uvolt = <4350000>; + }; + + }; + + rt5033@35 { + compatible = "richtek,rt5033-battery"; + interrupt-parent = <&gpx2>; + interrupts = <3 0>; + reg = <0x35>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 389ca13..73d235a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -149,6 +149,7 @@ ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International realtek Realtek Semiconductor Corp. renesas Renesas Electronics Corporation +richtek Richtek Technology Corporation ricoh Ricoh Co. Ltd. rockchip Fuzhou Rockchip Electronics Co., Ltd samsung Samsung Semiconductor