diff mbox

[01/13] NFC: dts: st21nfca: Fix compatible string spelling to follow other drivers

Message ID 1422225211-27510-2-git-send-email-christophe-h.ricard@st.com
State Superseded, archived
Headers show

Commit Message

Christophe Ricard Jan. 25, 2015, 10:33 p.m. UTC 
Other drivers are following the following compatible string format for dts:
s/_/-/

Because some devices may still use the previous string, the new corrected
string is added to the of_device_id table.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
---
 Documentation/devicetree/bindings/net/nfc/st21nfca.txt | 4 ++--
 drivers/nfc/st21nfca/i2c.c                             | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
index e4faa2e..db677fe 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
@@ -1,7 +1,7 @@ 
 * STMicroelectronics SAS. ST21NFCA NFC Controller
 
 Required properties:
-- compatible: Should be "st,st21nfca_i2c".
+- compatible: Should be "st,st21nfca-i2c".
 - clock-frequency: I²C work frequency.
 - reg: address on the bus
 - interrupt-parent: phandle for the interrupt gpio controller
@@ -20,7 +20,7 @@  Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
 
 	st21nfca: st21nfca@1 {
 
-		compatible = "st,st21nfca_i2c";
+		compatible = "st,st21nfca-i2c";
 
 		reg = <0x01>;
 		clock-frequency = <400000>;
diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c
index 0572208..b2e0792 100644
--- a/drivers/nfc/st21nfca/i2c.c
+++ b/drivers/nfc/st21nfca/i2c.c
@@ -661,6 +661,7 @@  static int st21nfca_hci_i2c_remove(struct i2c_client *client)
 
 #ifdef CONFIG_OF
 static const struct of_device_id of_st21nfca_i2c_match[] = {
+	{ .compatible = "st,st21nfca-i2c", },
 	{ .compatible = "st,st21nfca_i2c", },
 	{}
 };