new file mode 100644
@@ -0,0 +1,54 @@
+Imagination Technologies Pulse Density Modulator (PDM) DAC.
+
+Required properties:
+- compatible: Must be "img,pistachio-pdm"
+- clocks: phandle to input PDM clock
+- clock-names: Must include the following entry:
+ - pdm: input clock to pdm block.
+- img,cr-periph: Must contain a phandle to the peripheral control
+ syscon node which contains PDM control registers.
+- #pdm-cells: Must be 2.
+- The first cell is the PDM channel number (valid values: 0, 1, 2, 3)
+- The second cell is 12-bit pulse-in value
+
+Specifying PDM information for devices
+======================================
+
+1. PDM User nodes
+
+PDM properties should be named "pdms". The exact meaning of each pdms property
+is described above.
+
+ pdm-specifier : array of #pdm-cells specifying the given PDM
+ (controller specific)
+
+The following example could be used to describe a PDM-based backlight device:
+
+ pdm: pdm {
+ #pdm-cells = <2>;
+ };
+
+ [...]
+
+ bl: backlight {
+ pdms = <&pdm 2 0>;
+ };
+
+pdm-specifier typically encodes the chip-relative PDM channel number and the
+12-bit pulse-in value.
+
+2. PDM Controller nodes
+
+PDM controller nodes must specify the number of cells used for the specifier
+using the '#pdm-cells' property.
+
+An example PDM controller might look like this:
+
+Example:
+ pdm: pdm@18148000 {
+ compatible = "img,pistachio-pdm";
+ clocks = <&pdm_clk>;
+ clk-names = "pdm";
+ img,cr-periph = <&cr_periph>;
+ #pdm-cells = <2>;
+ };