From patchwork Wed Oct 15 05:38:25 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Matt Ranostay X-Patchwork-Id: 399749 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id CCE1C140119 for ; Wed, 15 Oct 2014 16:37:39 +1100 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751106AbaJOFhi (ORCPT ); Wed, 15 Oct 2014 01:37:38 -0400 Received: from mail-pd0-f181.google.com ([209.85.192.181]:50208 "EHLO mail-pd0-f181.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751096AbaJOFhg (ORCPT ); Wed, 15 Oct 2014 01:37:36 -0400 Received: by mail-pd0-f181.google.com with SMTP id z10so623708pdj.12 for ; Tue, 14 Oct 2014 22:37:36 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=5MQP7ZvtViDmCYVtiw3MeHAj/bv2fKC7N8+WWUZvhTk=; b=WcR96V+3m1BaEaHoy3M3XH4St/D6Ba+39qbVGCAhjrRyA1XI4tq5zxCEQV4/tTKmKV K6cjttXYFzO1hcrwbcnDlSDDD1df8kKi4GUrGWQpEXa762n5/b+EZ7JWsj5Oo6EtRXjv uNp3ueuriB15G8f4v4LJ/SG0jyjVVJsHt7xam1lT7spOwNmbg4yh3vqxNHZeO4uppged aEj4WdZqoLhXraEDNGDrZYa6DjRm3etBAjt2kyUEkeTY97Iao5lM+M+JVnM32+bfPvDo 4k2yt+0pGp1nhxQckU3R2BK/Jsh+A2LCGgBgUDgQE1Kfluj+ARBtQubg89DTvtdizF9V 8ldw== X-Received: by 10.66.142.163 with SMTP id rx3mr9768986pab.124.1413351456242; Tue, 14 Oct 2014 22:37:36 -0700 (PDT) Received: from niteshade.hsd1.or.comcast.net ([73.11.13.125]) by mx.google.com with ESMTPSA id rx2sm8434067pbc.50.2014.10.14.22.37.35 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Tue, 14 Oct 2014 22:37:35 -0700 (PDT) From: Matt Ranostay To: dmitry.torokhov@gmail.com, galak@codeaurora.org, zonque@gmail.com Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org, Matt Ranostay Subject: [PATCH v7 1/3] cap11xx: make driver generic for variant support Date: Tue, 14 Oct 2014 22:38:25 -0700 Message-Id: <1413351507-6611-2-git-send-email-mranostay@gmail.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1413351507-6611-1-git-send-email-mranostay@gmail.com> References: <1413351507-6611-1-git-send-email-mranostay@gmail.com> Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org cap1106 driver can support much more one device make the driver generic for support of similar parts. Signed-off-by: Matt Ranostay --- .../bindings/input/{cap1106.txt => cap11xx.txt} | 19 +- drivers/input/keyboard/Kconfig | 8 +- drivers/input/keyboard/Makefile | 2 +- drivers/input/keyboard/cap1106.c | 341 --------------------- drivers/input/keyboard/cap11xx.c | 340 ++++++++++++++++++++ 5 files changed, 355 insertions(+), 355 deletions(-) rename Documentation/devicetree/bindings/input/{cap1106.txt => cap11xx.txt} (74%) delete mode 100644 drivers/input/keyboard/cap1106.c create mode 100644 drivers/input/keyboard/cap11xx.c diff --git a/Documentation/devicetree/bindings/input/cap1106.txt b/Documentation/devicetree/bindings/input/cap11xx.txt similarity index 74% rename from Documentation/devicetree/bindings/input/cap1106.txt rename to Documentation/devicetree/bindings/input/cap11xx.txt index 4b46390..5164920 100644 --- a/Documentation/devicetree/bindings/input/cap1106.txt +++ b/Documentation/devicetree/bindings/input/cap11xx.txt @@ -1,11 +1,12 @@ -Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor +Device tree bindings for Microchip CAP11xx based capacitive touch sensors -The node for this driver must be a child of a I2C controller node, as the +The node for this device must be a child of a I2C controller node, as the device communication via I2C only. Required properties: - compatible: Must be "microchip,cap1106" + compatible: Must contain one of: + "microchip,cap1106" reg: The I2C slave address of the device. Only 0x28 is valid. @@ -43,11 +44,11 @@ i2c_controller { autorepeat; microchip,sensor-gain = <2>; - linux,keycodes = <103 /* KEY_UP */ - 106 /* KEY_RIGHT */ - 108 /* KEY_DOWN */ - 105 /* KEY_LEFT */ - 109 /* KEY_PAGEDOWN */ - 104>; /* KEY_PAGEUP */ + linux,keycodes = <103>, /* KEY_UP */ + <106>, /* KEY_RIGHT */ + <108>, /* KEY_DOWN */ + <105>, /* KEY_LEFT */ + <109>, /* KEY_PAGEDOWN */ + <104>; /* KEY_PAGEUP */ }; } diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index a3958c6..96ee26c 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -665,14 +665,14 @@ config KEYBOARD_CROS_EC To compile this driver as a module, choose M here: the module will be called cros_ec_keyb. -config KEYBOARD_CAP1106 - tristate "Microchip CAP1106 touch sensor" +config KEYBOARD_CAP11XX + tristate "Microchip CAP11XX based touch sensors" depends on OF && I2C select REGMAP_I2C help - Say Y here to enable the CAP1106 touch sensor driver. + Say Y here to enable the CAP11XX touch sensor driver. To compile this driver as a module, choose M here: the - module will be called cap1106. + module will be called cap11xx. endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 0a33456..febafa5 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o -obj-$(CONFIG_KEYBOARD_CAP1106) += cap1106.o +obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c deleted file mode 100644 index d70b65a..0000000 --- a/drivers/input/keyboard/cap1106.c +++ /dev/null @@ -1,341 +0,0 @@ -/* - * Input driver for Microchip CAP1106, 6 channel capacitive touch sensor - * - * http://www.microchip.com/wwwproducts/Devices.aspx?product=CAP1106 - * - * (c) 2014 Daniel Mack - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define CAP1106_REG_MAIN_CONTROL 0x00 -#define CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT (6) -#define CAP1106_REG_MAIN_CONTROL_GAIN_MASK (0xc0) -#define CAP1106_REG_MAIN_CONTROL_DLSEEP BIT(4) -#define CAP1106_REG_GENERAL_STATUS 0x02 -#define CAP1106_REG_SENSOR_INPUT 0x03 -#define CAP1106_REG_NOISE_FLAG_STATUS 0x0a -#define CAP1106_REG_SENOR_DELTA(X) (0x10 + (X)) -#define CAP1106_REG_SENSITIVITY_CONTROL 0x1f -#define CAP1106_REG_CONFIG 0x20 -#define CAP1106_REG_SENSOR_ENABLE 0x21 -#define CAP1106_REG_SENSOR_CONFIG 0x22 -#define CAP1106_REG_SENSOR_CONFIG2 0x23 -#define CAP1106_REG_SAMPLING_CONFIG 0x24 -#define CAP1106_REG_CALIBRATION 0x26 -#define CAP1106_REG_INT_ENABLE 0x27 -#define CAP1106_REG_REPEAT_RATE 0x28 -#define CAP1106_REG_MT_CONFIG 0x2a -#define CAP1106_REG_MT_PATTERN_CONFIG 0x2b -#define CAP1106_REG_MT_PATTERN 0x2d -#define CAP1106_REG_RECALIB_CONFIG 0x2f -#define CAP1106_REG_SENSOR_THRESH(X) (0x30 + (X)) -#define CAP1106_REG_SENSOR_NOISE_THRESH 0x38 -#define CAP1106_REG_STANDBY_CHANNEL 0x40 -#define CAP1106_REG_STANDBY_CONFIG 0x41 -#define CAP1106_REG_STANDBY_SENSITIVITY 0x42 -#define CAP1106_REG_STANDBY_THRESH 0x43 -#define CAP1106_REG_CONFIG2 0x44 -#define CAP1106_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) -#define CAP1106_REG_SENSOR_CALIB (0xb1 + (X)) -#define CAP1106_REG_SENSOR_CALIB_LSB1 0xb9 -#define CAP1106_REG_SENSOR_CALIB_LSB2 0xba -#define CAP1106_REG_PRODUCT_ID 0xfd -#define CAP1106_REG_MANUFACTURER_ID 0xfe -#define CAP1106_REG_REVISION 0xff - -#define CAP1106_NUM_CHN 6 -#define CAP1106_PRODUCT_ID 0x55 -#define CAP1106_MANUFACTURER_ID 0x5d - -struct cap1106_priv { - struct regmap *regmap; - struct input_dev *idev; - - /* config */ - unsigned short keycodes[CAP1106_NUM_CHN]; -}; - -static const struct reg_default cap1106_reg_defaults[] = { - { CAP1106_REG_MAIN_CONTROL, 0x00 }, - { CAP1106_REG_GENERAL_STATUS, 0x00 }, - { CAP1106_REG_SENSOR_INPUT, 0x00 }, - { CAP1106_REG_NOISE_FLAG_STATUS, 0x00 }, - { CAP1106_REG_SENSITIVITY_CONTROL, 0x2f }, - { CAP1106_REG_CONFIG, 0x20 }, - { CAP1106_REG_SENSOR_ENABLE, 0x3f }, - { CAP1106_REG_SENSOR_CONFIG, 0xa4 }, - { CAP1106_REG_SENSOR_CONFIG2, 0x07 }, - { CAP1106_REG_SAMPLING_CONFIG, 0x39 }, - { CAP1106_REG_CALIBRATION, 0x00 }, - { CAP1106_REG_INT_ENABLE, 0x3f }, - { CAP1106_REG_REPEAT_RATE, 0x3f }, - { CAP1106_REG_MT_CONFIG, 0x80 }, - { CAP1106_REG_MT_PATTERN_CONFIG, 0x00 }, - { CAP1106_REG_MT_PATTERN, 0x3f }, - { CAP1106_REG_RECALIB_CONFIG, 0x8a }, - { CAP1106_REG_SENSOR_THRESH(0), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(1), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(2), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(3), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(4), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(5), 0x40 }, - { CAP1106_REG_SENSOR_NOISE_THRESH, 0x01 }, - { CAP1106_REG_STANDBY_CHANNEL, 0x00 }, - { CAP1106_REG_STANDBY_CONFIG, 0x39 }, - { CAP1106_REG_STANDBY_SENSITIVITY, 0x02 }, - { CAP1106_REG_STANDBY_THRESH, 0x40 }, - { CAP1106_REG_CONFIG2, 0x40 }, - { CAP1106_REG_SENSOR_CALIB_LSB1, 0x00 }, - { CAP1106_REG_SENSOR_CALIB_LSB2, 0x00 }, -}; - -static bool cap1106_volatile_reg(struct device *dev, unsigned int reg) -{ - switch (reg) { - case CAP1106_REG_MAIN_CONTROL: - case CAP1106_REG_SENSOR_INPUT: - case CAP1106_REG_SENOR_DELTA(0): - case CAP1106_REG_SENOR_DELTA(1): - case CAP1106_REG_SENOR_DELTA(2): - case CAP1106_REG_SENOR_DELTA(3): - case CAP1106_REG_SENOR_DELTA(4): - case CAP1106_REG_SENOR_DELTA(5): - case CAP1106_REG_PRODUCT_ID: - case CAP1106_REG_MANUFACTURER_ID: - case CAP1106_REG_REVISION: - return true; - } - - return false; -} - -static const struct regmap_config cap1106_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - - .max_register = CAP1106_REG_REVISION, - .reg_defaults = cap1106_reg_defaults, - - .num_reg_defaults = ARRAY_SIZE(cap1106_reg_defaults), - .cache_type = REGCACHE_RBTREE, - .volatile_reg = cap1106_volatile_reg, -}; - -static irqreturn_t cap1106_thread_func(int irq_num, void *data) -{ - struct cap1106_priv *priv = data; - unsigned int status; - int ret, i; - - /* - * Deassert interrupt. This needs to be done before reading the status - * registers, which will not carry valid values otherwise. - */ - ret = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, 1, 0); - if (ret < 0) - goto out; - - ret = regmap_read(priv->regmap, CAP1106_REG_SENSOR_INPUT, &status); - if (ret < 0) - goto out; - - for (i = 0; i < CAP1106_NUM_CHN; i++) - input_report_key(priv->idev, priv->keycodes[i], - status & (1 << i)); - - input_sync(priv->idev); - -out: - return IRQ_HANDLED; -} - -static int cap1106_set_sleep(struct cap1106_priv *priv, bool sleep) -{ - return regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, - CAP1106_REG_MAIN_CONTROL_DLSEEP, - sleep ? CAP1106_REG_MAIN_CONTROL_DLSEEP : 0); -} - -static int cap1106_input_open(struct input_dev *idev) -{ - struct cap1106_priv *priv = input_get_drvdata(idev); - - return cap1106_set_sleep(priv, false); -} - -static void cap1106_input_close(struct input_dev *idev) -{ - struct cap1106_priv *priv = input_get_drvdata(idev); - - cap1106_set_sleep(priv, true); -} - -static int cap1106_i2c_probe(struct i2c_client *i2c_client, - const struct i2c_device_id *id) -{ - struct device *dev = &i2c_client->dev; - struct cap1106_priv *priv; - struct device_node *node; - int i, error, irq, gain = 0; - unsigned int val, rev; - u32 gain32, keycodes[CAP1106_NUM_CHN]; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->regmap = devm_regmap_init_i2c(i2c_client, &cap1106_regmap_config); - if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); - - error = regmap_read(priv->regmap, CAP1106_REG_PRODUCT_ID, &val); - if (error) - return error; - - if (val != CAP1106_PRODUCT_ID) { - dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n", - val, CAP1106_PRODUCT_ID); - return -ENODEV; - } - - error = regmap_read(priv->regmap, CAP1106_REG_MANUFACTURER_ID, &val); - if (error) - return error; - - if (val != CAP1106_MANUFACTURER_ID) { - dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n", - val, CAP1106_MANUFACTURER_ID); - return -ENODEV; - } - - error = regmap_read(priv->regmap, CAP1106_REG_REVISION, &rev); - if (error < 0) - return error; - - dev_info(dev, "CAP1106 detected, revision 0x%02x\n", rev); - i2c_set_clientdata(i2c_client, priv); - node = dev->of_node; - - if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) { - if (is_power_of_2(gain32) && gain32 <= 8) - gain = ilog2(gain32); - else - dev_err(dev, "Invalid sensor-gain value %d\n", gain32); - } - - BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes)); - - /* Provide some useful defaults */ - for (i = 0; i < ARRAY_SIZE(keycodes); i++) - keycodes[i] = KEY_A + i; - - of_property_read_u32_array(node, "linux,keycodes", - keycodes, ARRAY_SIZE(keycodes)); - - for (i = 0; i < ARRAY_SIZE(keycodes); i++) - priv->keycodes[i] = keycodes[i]; - - error = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, - CAP1106_REG_MAIN_CONTROL_GAIN_MASK, - gain << CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT); - if (error) - return error; - - /* Disable autorepeat. The Linux input system has its own handling. */ - error = regmap_write(priv->regmap, CAP1106_REG_REPEAT_RATE, 0); - if (error) - return error; - - priv->idev = devm_input_allocate_device(dev); - if (!priv->idev) - return -ENOMEM; - - priv->idev->name = "CAP1106 capacitive touch sensor"; - priv->idev->id.bustype = BUS_I2C; - priv->idev->evbit[0] = BIT_MASK(EV_KEY); - - if (of_property_read_bool(node, "autorepeat")) - __set_bit(EV_REP, priv->idev->evbit); - - for (i = 0; i < CAP1106_NUM_CHN; i++) - __set_bit(priv->keycodes[i], priv->idev->keybit); - - __clear_bit(KEY_RESERVED, priv->idev->keybit); - - priv->idev->keycode = priv->keycodes; - priv->idev->keycodesize = sizeof(priv->keycodes[0]); - priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes); - - priv->idev->id.vendor = CAP1106_MANUFACTURER_ID; - priv->idev->id.product = CAP1106_PRODUCT_ID; - priv->idev->id.version = rev; - - priv->idev->open = cap1106_input_open; - priv->idev->close = cap1106_input_close; - - input_set_drvdata(priv->idev, priv); - - /* - * Put the device in deep sleep mode for now. - * ->open() will bring it back once the it is actually needed. - */ - cap1106_set_sleep(priv, true); - - error = input_register_device(priv->idev); - if (error) - return error; - - irq = irq_of_parse_and_map(node, 0); - if (!irq) { - dev_err(dev, "Unable to parse or map IRQ\n"); - return -ENXIO; - } - - error = devm_request_threaded_irq(dev, irq, NULL, cap1106_thread_func, - IRQF_ONESHOT, dev_name(dev), priv); - if (error) - return error; - - return 0; -} - -static const struct of_device_id cap1106_dt_ids[] = { - { .compatible = "microchip,cap1106", }, - {} -}; -MODULE_DEVICE_TABLE(of, cap1106_dt_ids); - -static const struct i2c_device_id cap1106_i2c_ids[] = { - { "cap1106", 0 }, - {} -}; -MODULE_DEVICE_TABLE(i2c, cap1106_i2c_ids); - -static struct i2c_driver cap1106_i2c_driver = { - .driver = { - .name = "cap1106", - .owner = THIS_MODULE, - .of_match_table = cap1106_dt_ids, - }, - .id_table = cap1106_i2c_ids, - .probe = cap1106_i2c_probe, -}; - -module_i2c_driver(cap1106_i2c_driver); - -MODULE_ALIAS("platform:cap1106"); -MODULE_DESCRIPTION("Microchip CAP1106 driver"); -MODULE_AUTHOR("Daniel Mack "); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c new file mode 100644 index 0000000..0da2e83 --- /dev/null +++ b/drivers/input/keyboard/cap11xx.c @@ -0,0 +1,340 @@ +/* + * Input driver for Microchip CAP11xx based capacitive touch sensors + * + * + * (c) 2014 Daniel Mack + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define CAP11XX_REG_MAIN_CONTROL 0x00 +#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT (6) +#define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK (0xc0) +#define CAP11XX_REG_MAIN_CONTROL_DLSEEP BIT(4) +#define CAP11XX_REG_GENERAL_STATUS 0x02 +#define CAP11XX_REG_SENSOR_INPUT 0x03 +#define CAP11XX_REG_NOISE_FLAG_STATUS 0x0a +#define CAP11XX_REG_SENOR_DELTA(X) (0x10 + (X)) +#define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f +#define CAP11XX_REG_CONFIG 0x20 +#define CAP11XX_REG_SENSOR_ENABLE 0x21 +#define CAP11XX_REG_SENSOR_CONFIG 0x22 +#define CAP11XX_REG_SENSOR_CONFIG2 0x23 +#define CAP11XX_REG_SAMPLING_CONFIG 0x24 +#define CAP11XX_REG_CALIBRATION 0x26 +#define CAP11XX_REG_INT_ENABLE 0x27 +#define CAP11XX_REG_REPEAT_RATE 0x28 +#define CAP11XX_REG_MT_CONFIG 0x2a +#define CAP11XX_REG_MT_PATTERN_CONFIG 0x2b +#define CAP11XX_REG_MT_PATTERN 0x2d +#define CAP11XX_REG_RECALIB_CONFIG 0x2f +#define CAP11XX_REG_SENSOR_THRESH(X) (0x30 + (X)) +#define CAP11XX_REG_SENSOR_NOISE_THRESH 0x38 +#define CAP11XX_REG_STANDBY_CHANNEL 0x40 +#define CAP11XX_REG_STANDBY_CONFIG 0x41 +#define CAP11XX_REG_STANDBY_SENSITIVITY 0x42 +#define CAP11XX_REG_STANDBY_THRESH 0x43 +#define CAP11XX_REG_CONFIG2 0x44 +#define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) +#define CAP11XX_REG_SENSOR_CALIB (0xb1 + (X)) +#define CAP11XX_REG_SENSOR_CALIB_LSB1 0xb9 +#define CAP11XX_REG_SENSOR_CALIB_LSB2 0xba +#define CAP11XX_REG_PRODUCT_ID 0xfd +#define CAP11XX_REG_MANUFACTURER_ID 0xfe +#define CAP11XX_REG_REVISION 0xff + +#define CAP11XX_NUM_CHN 6 +#define CAP11XX_PRODUCT_ID 0x55 +#define CAP11XX_MANUFACTURER_ID 0x5d + +struct cap11xx_priv { + struct regmap *regmap; + struct input_dev *idev; + + /* config */ + unsigned short keycodes[CAP11XX_NUM_CHN]; +}; + +static const struct reg_default cap11xx_reg_defaults[] = { + { CAP11XX_REG_MAIN_CONTROL, 0x00 }, + { CAP11XX_REG_GENERAL_STATUS, 0x00 }, + { CAP11XX_REG_SENSOR_INPUT, 0x00 }, + { CAP11XX_REG_NOISE_FLAG_STATUS, 0x00 }, + { CAP11XX_REG_SENSITIVITY_CONTROL, 0x2f }, + { CAP11XX_REG_CONFIG, 0x20 }, + { CAP11XX_REG_SENSOR_ENABLE, 0x3f }, + { CAP11XX_REG_SENSOR_CONFIG, 0xa4 }, + { CAP11XX_REG_SENSOR_CONFIG2, 0x07 }, + { CAP11XX_REG_SAMPLING_CONFIG, 0x39 }, + { CAP11XX_REG_CALIBRATION, 0x00 }, + { CAP11XX_REG_INT_ENABLE, 0x3f }, + { CAP11XX_REG_REPEAT_RATE, 0x3f }, + { CAP11XX_REG_MT_CONFIG, 0x80 }, + { CAP11XX_REG_MT_PATTERN_CONFIG, 0x00 }, + { CAP11XX_REG_MT_PATTERN, 0x3f }, + { CAP11XX_REG_RECALIB_CONFIG, 0x8a }, + { CAP11XX_REG_SENSOR_THRESH(0), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(1), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(2), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(3), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(4), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(5), 0x40 }, + { CAP11XX_REG_SENSOR_NOISE_THRESH, 0x01 }, + { CAP11XX_REG_STANDBY_CHANNEL, 0x00 }, + { CAP11XX_REG_STANDBY_CONFIG, 0x39 }, + { CAP11XX_REG_STANDBY_SENSITIVITY, 0x02 }, + { CAP11XX_REG_STANDBY_THRESH, 0x40 }, + { CAP11XX_REG_CONFIG2, 0x40 }, + { CAP11XX_REG_SENSOR_CALIB_LSB1, 0x00 }, + { CAP11XX_REG_SENSOR_CALIB_LSB2, 0x00 }, +}; + +static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case CAP11XX_REG_MAIN_CONTROL: + case CAP11XX_REG_SENSOR_INPUT: + case CAP11XX_REG_SENOR_DELTA(0): + case CAP11XX_REG_SENOR_DELTA(1): + case CAP11XX_REG_SENOR_DELTA(2): + case CAP11XX_REG_SENOR_DELTA(3): + case CAP11XX_REG_SENOR_DELTA(4): + case CAP11XX_REG_SENOR_DELTA(5): + case CAP11XX_REG_PRODUCT_ID: + case CAP11XX_REG_MANUFACTURER_ID: + case CAP11XX_REG_REVISION: + return true; + } + + return false; +} + +static const struct regmap_config cap11xx_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = CAP11XX_REG_REVISION, + .reg_defaults = cap11xx_reg_defaults, + + .num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .volatile_reg = cap11xx_volatile_reg, +}; + +static irqreturn_t cap11xx_thread_func(int irq_num, void *data) +{ + struct cap11xx_priv *priv = data; + unsigned int status; + int ret, i; + + /* + * Deassert interrupt. This needs to be done before reading the status + * registers, which will not carry valid values otherwise. + */ + ret = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, 1, 0); + if (ret < 0) + goto out; + + ret = regmap_read(priv->regmap, CAP11XX_REG_SENSOR_INPUT, &status); + if (ret < 0) + goto out; + + for (i = 0; i < CAP11XX_NUM_CHN; i++) + input_report_key(priv->idev, priv->keycodes[i], + status & (1 << i)); + + input_sync(priv->idev); + +out: + return IRQ_HANDLED; +} + +static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep) +{ + return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, + CAP11XX_REG_MAIN_CONTROL_DLSEEP, + sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0); +} + +static int cap11xx_input_open(struct input_dev *idev) +{ + struct cap11xx_priv *priv = input_get_drvdata(idev); + + return cap11xx_set_sleep(priv, false); +} + +static void cap11xx_input_close(struct input_dev *idev) +{ + struct cap11xx_priv *priv = input_get_drvdata(idev); + + cap11xx_set_sleep(priv, true); +} + +static int cap11xx_i2c_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c_client->dev; + struct cap11xx_priv *priv; + struct device_node *node; + int i, error, irq, gain = 0; + unsigned int val, rev; + u32 gain32, keycodes[CAP11XX_NUM_CHN]; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + error = regmap_read(priv->regmap, CAP11XX_REG_PRODUCT_ID, &val); + if (error) + return error; + + if (val != CAP11XX_PRODUCT_ID) { + dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n", + val, CAP11XX_PRODUCT_ID); + return -ENODEV; + } + + error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val); + if (error) + return error; + + if (val != CAP11XX_MANUFACTURER_ID) { + dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n", + val, CAP11XX_MANUFACTURER_ID); + return -ENODEV; + } + + error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev); + if (error < 0) + return error; + + dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev); + i2c_set_clientdata(i2c_client, priv); + node = dev->of_node; + + if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) { + if (is_power_of_2(gain32) && gain32 <= 8) + gain = ilog2(gain32); + else + dev_err(dev, "Invalid sensor-gain value %d\n", gain32); + } + + BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes)); + + /* Provide some useful defaults */ + for (i = 0; i < ARRAY_SIZE(keycodes); i++) + keycodes[i] = KEY_A + i; + + of_property_read_u32_array(node, "linux,keycodes", + keycodes, ARRAY_SIZE(keycodes)); + + for (i = 0; i < ARRAY_SIZE(keycodes); i++) + priv->keycodes[i] = keycodes[i]; + + error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, + CAP11XX_REG_MAIN_CONTROL_GAIN_MASK, + gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT); + if (error) + return error; + + /* Disable autorepeat. The Linux input system has its own handling. */ + error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0); + if (error) + return error; + + priv->idev = devm_input_allocate_device(dev); + if (!priv->idev) + return -ENOMEM; + + priv->idev->name = "CAP11XX capacitive touch sensor"; + priv->idev->id.bustype = BUS_I2C; + priv->idev->evbit[0] = BIT_MASK(EV_KEY); + + if (of_property_read_bool(node, "autorepeat")) + __set_bit(EV_REP, priv->idev->evbit); + + for (i = 0; i < CAP11XX_NUM_CHN; i++) + __set_bit(priv->keycodes[i], priv->idev->keybit); + + __clear_bit(KEY_RESERVED, priv->idev->keybit); + + priv->idev->keycode = priv->keycodes; + priv->idev->keycodesize = sizeof(priv->keycodes[0]); + priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes); + + priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID; + priv->idev->id.product = CAP11XX_PRODUCT_ID; + priv->idev->id.version = rev; + + priv->idev->open = cap11xx_input_open; + priv->idev->close = cap11xx_input_close; + + input_set_drvdata(priv->idev, priv); + + /* + * Put the device in deep sleep mode for now. + * ->open() will bring it back once the it is actually needed. + */ + cap11xx_set_sleep(priv, true); + + error = input_register_device(priv->idev); + if (error) + return error; + + irq = irq_of_parse_and_map(node, 0); + if (!irq) { + dev_err(dev, "Unable to parse or map IRQ\n"); + return -ENXIO; + } + + error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func, + IRQF_ONESHOT, dev_name(dev), priv); + if (error) + return error; + + return 0; +} + +static const struct of_device_id cap11xx_dt_ids[] = { + { .compatible = "microchip,cap1106", }, + {} +}; +MODULE_DEVICE_TABLE(of, cap11xx_dt_ids); + +static const struct i2c_device_id cap11xx_i2c_ids[] = { + { "cap1106", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids); + +static struct i2c_driver cap11xx_i2c_driver = { + .driver = { + .name = "cap11xx", + .owner = THIS_MODULE, + .of_match_table = cap11xx_dt_ids, + }, + .id_table = cap11xx_i2c_ids, + .probe = cap11xx_i2c_probe, +}; + +module_i2c_driver(cap11xx_i2c_driver); + +MODULE_ALIAS("platform:cap11xx"); +MODULE_DESCRIPTION("Microchip CAP11XX driver"); +MODULE_AUTHOR("Daniel Mack "); +MODULE_LICENSE("GPL v2");