diff mbox

[v2] w1: ds2482: add support for ds2482-101 sleep pin

Message ID 1412258796-12814-1-git-send-email-s.trumtrar@pengutronix.de
State New, archived
Headers show

Commit Message

Steffen Trumtrar Oct. 2, 2014, 2:06 p.m. UTC
The ds2482-101 version of the chip has an active-low sleep pin. Add this as a
gpio to the probe function and describe the DT binding accordingly.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---

Changes since v1:
	- rebased to next-20141001

 Documentation/devicetree/bindings/w1/ds2482.txt | 18 ++++++++++++++++++
 drivers/w1/masters/ds2482.c                     |  9 +++++++++
 2 files changed, 27 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/w1/ds2482.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/w1/ds2482.txt b/Documentation/devicetree/bindings/w1/ds2482.txt
new file mode 100644
index 000000000000..e065207ab4b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/ds2482.txt
@@ -0,0 +1,18 @@ 
+ds2482 devicetree bindings
+
+Required properties:
+
+ - compatible: "dallas,ds2482"
+
+Optional properties:
+
+ - sleep-gpios: if specified, the ds2482 has a low-active sleep-pin (ds2482-101).
+
+Example:
+
+	1wire@18 {
+		compatible = "dallas,ds2482";
+		reg = <0x18>;
+		sleep-gpios = <&gpio4 2 0>;
+	};
+
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index e76a9b39abb2..d9e7fd479224 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -18,6 +18,7 @@ 
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <asm/delay.h>
 
 #include "../w1.h"
@@ -128,6 +129,7 @@  struct ds2482_data {
 	u8			channel;
 	u8			read_prt;	/* see DS2482_PTR_CODE_xxx */
 	u8			reg_config;
+	struct gpio_desc	*slpz_gpio;
 };
 
 
@@ -449,6 +451,7 @@  static int ds2482_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
 	struct ds2482_data *data;
+	struct gpio_desc *gpio;
 	int err = -ENODEV;
 	int temp1;
 	int idx;
@@ -466,6 +469,12 @@  static int ds2482_probe(struct i2c_client *client,
 	data->client = client;
 	i2c_set_clientdata(client, data);
 
+	gpio = devm_gpiod_get(&client->dev, "sleep");
+	if (!IS_ERR(gpio)) {
+		data->slpz_gpio = gpio;
+		gpiod_direction_output(data->slpz_gpio, 1);
+	}
+
 	/* Reset the device (sets the read_ptr to status) */
 	if (ds2482_send_cmd(data, DS2482_CMD_RESET) < 0) {
 		dev_warn(&client->dev, "DS2482 reset failed.\n");