| Message ID | 1401963572-10953-4-git-send-email-voice.shen@atmel.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Thu, Jun 05, 2014 at 06:19:30PM +0800, Bo Shen wrote: > + - reg: the I2C address of the device. > + - clocks and clock-names: reference to > + <Documentation/devicetree/bindings/clock/clock-bindings.txt> This all looks good except for in the above you should list the name of the clock (mclk) - that name is part of the binding.
diff --git a/Documentation/devicetree/bindings/sound/wm8904.txt b/Documentation/devicetree/bindings/sound/wm8904.txt new file mode 100644 index 0000000..ef3d23da --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wm8904.txt @@ -0,0 +1,32 @@ +WM8904 audio CODEC + +This device supports I2C only. + +Required properties: + - compatible: "wlf,wm8904" + - reg: the I2C address of the device. + - clocks and clock-names: reference to + <Documentation/devicetree/bindings/clock/clock-bindings.txt> + +Pins on the device (for linking into audio routes): + + * IN1L + * IN1R + * IN2L + * IN2R + * IN3L + * IN3R + * HPOUTL + * HPOUTR + * LINEOUTL + * LINEOUTR + * MICBIAS + +Examples: + +codec: wm8904@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; +};
Signed-off-by: Bo Shen <voice.shen@atmel.com> --- Documentation/devicetree/bindings/sound/wm8904.txt | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/wm8904.txt