Message ID | 1396053110-21639-10-git-send-email-sre@kernel.org |
---|---|
State | Superseded, archived |
Headers | show |
On Sat 2014-03-29 01:31:45, Sebastian Reichel wrote: > Create device tree binding documentation for > OMAP Synchronous Serial Interface (SSI) device. > > Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Pavel Machek <pavel@ucw.cz>
On Fri, Mar 28, 2014 at 7:31 PM, Sebastian Reichel <sre@kernel.org> wrote: > Create device tree binding documentation for > OMAP Synchronous Serial Interface (SSI) device. > > Signed-off-by: Sebastian Reichel <sre@kernel.org> > --- > Documentation/devicetree/bindings/hsi/omap-ssi.txt | 85 ++++++++++++++++++++++ > 1 file changed, 85 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hsi/omap-ssi.txt > > diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt > new file mode 100644 > index 0000000..709419b > --- /dev/null > +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt > @@ -0,0 +1,85 @@ > +OMAP SSI controller bindings > + > +OMAP Synchronous Serial Interface (SSI) controller implements a legacy > +variant of MIPI's High Speed Synchronous Serial Interface (HSI). > + > +Required properties: > +- compatible: Should include "ti,omap3-ssi". > +- reg-names: Contains the values "sys" and "gdd". > +- reg: Contains a register specifier for each entry in > + reg-names. You need to define the order here unless you have a strong argument why you can't. > +- interrupt-names: Contains the value "gdd_mpu". > +- interrupts: Contains interrupt information for each entry in > + interrupt-names. > +- ranges: Represents the bus address mapping between the main > + controller node and the child nodes below. > +- clocks: Contains clock specifiers for each entry in > + clock-names. > +- clock-names: Must include the following entries: > + "ssi_ssr_fck": The OMAP clock of that name > + "ssi_sst_fck": The OMAP clock of that name > + "ssi_ick": The OMAP clock of that name > +- #address-cells: Should be set to <1> > +- #size-cells: Should be set to <1> > + > +Each port is represented as a sub-node of the ti,omap3-ssi device. > + > +Required Port sub-node properties: > +- compatible: Should be set to the following value > + ti,omap3-ssi-port (applicable to OMAP34xx devices) > +- reg-names: Contains the values "rx" and "tx". > +- reg: Contains a register specifier for each entry in > + reg-names. You need to define the order here unless you have a strong argument why you can't. > +- interrupt-parent Should be a phandle for the interrupt controller > +- interrupt-names: Contains the values "mpu_irq0" and "mpu_irq1". Those names aren't exactly useful. > +- interrupts: Contains interrupt information for each entry in > + interrupt-names. You need to define the order here unless you have a strong argument why you can't. > +- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE > + events for the port. This is an optional board-specific > + property. If it's missing the port will not be > + enabled. > + > +Example for Nokia N900: > + > +ssi-controller@48058000 { > + compatible = "ti,omap3-ssi"; > + > + /* needed until hwmod is updated to use the compatible string */ > + ti,hwmods = "ssi"; > + > + reg = <0x48058000 0x1000>, > + <0x48059000 0x1000>; > + reg-names = "sys", > + "gdd"; > + > + interrupts = <55>; > + interrupt-names = "gdd_mpu"; > + > + clocks = <&ssi_ssr_fck>, > + <&ssi_sst_fck>, > + <&ssi_ick>; > + clock-names = "ssi_ssr_fck", > + "ssi_sst_fck", > + "ssi_ick"; > + > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + ssi-port@0 { Does this h/w really have more than 1 port? This should really be "ssi-port@4805a800" Or you need to fill in ranges to have a local offset. > + compatible = "ti,omap3-ssi-port"; > + > + reg = <0x4805a000 0x800>, > + <0x4805a800 0x800>; > + reg-names = "tx", > + "rx"; > + > + interrupt-parent = <&intc>; > + interrupts = <51>, > + <52>; > + interrupt-names = "mpu_irq0", > + "mpu_irq1"; > + > + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ > + } > +} > -- > 1.9.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Mon, Apr 21, 2014 at 11:43:47AM -0500, Rob Herring wrote: > On Fri, Mar 28, 2014 at 7:31 PM, Sebastian Reichel <sre@kernel.org> wrote: > > Create device tree binding documentation for > > OMAP Synchronous Serial Interface (SSI) device. > > > > Signed-off-by: Sebastian Reichel <sre@kernel.org> > > --- > > Documentation/devicetree/bindings/hsi/omap-ssi.txt | 85 ++++++++++++++++++++++ > > 1 file changed, 85 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/hsi/omap-ssi.txt > > > > diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt > > new file mode 100644 > > index 0000000..709419b > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt > > @@ -0,0 +1,85 @@ > > +OMAP SSI controller bindings > > + > > +OMAP Synchronous Serial Interface (SSI) controller implements a legacy > > +variant of MIPI's High Speed Synchronous Serial Interface (HSI). > > + > > +Required properties: > > +- compatible: Should include "ti,omap3-ssi". > > +- reg-names: Contains the values "sys" and "gdd". > > +- reg: Contains a register specifier for each entry in > > + reg-names. > > You need to define the order here unless you have a strong > argument why you can't. ok. > > +- interrupt-names: Contains the value "gdd_mpu". > > +- interrupts: Contains interrupt information for each entry in > > + interrupt-names. > > +- ranges: Represents the bus address mapping between the main > > + controller node and the child nodes below. > > +- clocks: Contains clock specifiers for each entry in > > + clock-names. > > +- clock-names: Must include the following entries: > > + "ssi_ssr_fck": The OMAP clock of that name > > + "ssi_sst_fck": The OMAP clock of that name > > + "ssi_ick": The OMAP clock of that name > > +- #address-cells: Should be set to <1> > > +- #size-cells: Should be set to <1> > > + > > +Each port is represented as a sub-node of the ti,omap3-ssi device. > > + > > +Required Port sub-node properties: > > +- compatible: Should be set to the following value > > + ti,omap3-ssi-port (applicable to OMAP34xx devices) > > +- reg-names: Contains the values "rx" and "tx". > > +- reg: Contains a register specifier for each entry in > > + reg-names. > > You need to define the order here unless you have a strong argument > why you can't. ok. > > +- interrupt-parent Should be a phandle for the interrupt controller > > +- interrupt-names: Contains the values "mpu_irq0" and "mpu_irq1". > > Those names aren't exactly useful. I removed interrupt-names in PATCHv4. > > +- interrupts: Contains interrupt information for each entry in > > + interrupt-names. > > You need to define the order here unless you have a strong argument > why you can't. ok. > > +- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE > > + events for the port. This is an optional board-specific > > + property. If it's missing the port will not be > > + enabled. > > + > > +Example for Nokia N900: > > + > > +ssi-controller@48058000 { > > + compatible = "ti,omap3-ssi"; > > + > > + /* needed until hwmod is updated to use the compatible string */ > > + ti,hwmods = "ssi"; > > + > > + reg = <0x48058000 0x1000>, > > + <0x48059000 0x1000>; > > + reg-names = "sys", > > + "gdd"; > > + > > + interrupts = <55>; > > + interrupt-names = "gdd_mpu"; > > + > > + clocks = <&ssi_ssr_fck>, > > + <&ssi_sst_fck>, > > + <&ssi_ick>; > > + clock-names = "ssi_ssr_fck", > > + "ssi_sst_fck", > > + "ssi_ick"; > > + > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + > > + ssi-port@0 { > > Does this h/w really have more than 1 port? Yes. I added this to the example in PATCHv4. > This should really be "ssi-port@4805a800" Or you need to fill in > ranges to have a local offset. ok. >> [...] -- Sebastian
diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt new file mode 100644 index 0000000..709419b --- /dev/null +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt @@ -0,0 +1,85 @@ +OMAP SSI controller bindings + +OMAP Synchronous Serial Interface (SSI) controller implements a legacy +variant of MIPI's High Speed Synchronous Serial Interface (HSI). + +Required properties: +- compatible: Should include "ti,omap3-ssi". +- reg-names: Contains the values "sys" and "gdd". +- reg: Contains a register specifier for each entry in + reg-names. +- interrupt-names: Contains the value "gdd_mpu". +- interrupts: Contains interrupt information for each entry in + interrupt-names. +- ranges: Represents the bus address mapping between the main + controller node and the child nodes below. +- clocks: Contains clock specifiers for each entry in + clock-names. +- clock-names: Must include the following entries: + "ssi_ssr_fck": The OMAP clock of that name + "ssi_sst_fck": The OMAP clock of that name + "ssi_ick": The OMAP clock of that name +- #address-cells: Should be set to <1> +- #size-cells: Should be set to <1> + +Each port is represented as a sub-node of the ti,omap3-ssi device. + +Required Port sub-node properties: +- compatible: Should be set to the following value + ti,omap3-ssi-port (applicable to OMAP34xx devices) +- reg-names: Contains the values "rx" and "tx". +- reg: Contains a register specifier for each entry in + reg-names. +- interrupt-parent Should be a phandle for the interrupt controller +- interrupt-names: Contains the values "mpu_irq0" and "mpu_irq1". +- interrupts: Contains interrupt information for each entry in + interrupt-names. +- ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE + events for the port. This is an optional board-specific + property. If it's missing the port will not be + enabled. + +Example for Nokia N900: + +ssi-controller@48058000 { + compatible = "ti,omap3-ssi"; + + /* needed until hwmod is updated to use the compatible string */ + ti,hwmods = "ssi"; + + reg = <0x48058000 0x1000>, + <0x48059000 0x1000>; + reg-names = "sys", + "gdd"; + + interrupts = <55>; + interrupt-names = "gdd_mpu"; + + clocks = <&ssi_ssr_fck>, + <&ssi_sst_fck>, + <&ssi_ick>; + clock-names = "ssi_ssr_fck", + "ssi_sst_fck", + "ssi_ick"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ssi-port@0 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805a000 0x800>, + <0x4805a800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <51>, + <52>; + interrupt-names = "mpu_irq0", + "mpu_irq1"; + + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ + } +}
Create device tree binding documentation for OMAP Synchronous Serial Interface (SSI) device. Signed-off-by: Sebastian Reichel <sre@kernel.org> --- Documentation/devicetree/bindings/hsi/omap-ssi.txt | 85 ++++++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 Documentation/devicetree/bindings/hsi/omap-ssi.txt